RGBlink NDI PTZ Camera Controller (RGBBKT) User Manual

1. Kupu Whakataki

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.

Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).

2. Tatūnga

Follow these steps to set up your RGBlink NDI PTZ Camera Controller.

2.1 Te Wetewete me te Tirotiro Tuatahi

• Kia ata tangohia nga waahanga katoa mai i te kete.
• Manatokohia kei reira nga mea katoa kua whakarārangihia ki te raarangi whakaemi.
• Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.

2.2 Te hono i te Kaiwhakahaere

The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.

• Te mana ki runga Itarangi (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
• Pūurutau Hiko o waho: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
• Hononga kāmera:
  • Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
  • Mana Raupapa: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.

Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.

Whakaahua 2.2: Example connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.

Image 2.3: Diagram illustrating IP camera connections via a network switch.

2.3 Whirihoranga Whatunga

For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.

• Access the controller's web atanga ma te whakauru i tana wahitau IP ki a web browser. (Refer to the device's display or network tools to find the IP address).
• The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
• I roto i te web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.

Image 2.4: NDI|HX camera search and control interface on the controller.

3. Mahi

This section details the operational functions of the RGBlink NDI PTZ Camera Controller.

3.1 Neke atuview o Mana

The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.

Image 3.1: The controller's 3.49-inch LCD display.

Whakaahua 3.2: Taipitopito view of the 3D joystick and multi-function knobs.

Image 3.3: Layout of the controller's buttons and numeric keypad area.

3.2 Kōwhiringa Kāmera

• Ngā Pātene Kōwhiri Tere: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
• Papapātuhi Tau: For cameras beyond the quick select buttons (up to 255), press the ID CAM button, then enter the camera number using the numeric keypad, and press KAUPAPA.

Image 3.4: The controller's ability to manage multiple cameras.

3.3 PTZ Mana

• Ririhiko: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
• PT Tere Knob: Adjusts the gimbal movement speed for pan and tilt.
• Zoom Knob: Provides precise zoom control, especially useful in preview aratau.

3.4 Image Parameter Adjustment

• IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
• R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
• FOCUS Button: Pehia te KAUPAPA MONO button to switch the camera to auto focus mode.
• EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
• BACKLIGHT Button: Toggles the camera's backlight mode.
• WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
• ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.

Image 3.5: Functions of buttons and knobs on the left side of the controller.

Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.

3.5 Tatūkē

• SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press KAUPAPA ki te whakaora. Perehi ESC ki te puta.
• CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press KAUPAPA to recall. Press ESC ki te puta.
• The controller supports saving and recalling up to 255 presets per camera.

3.6 Whakatere Tahua

• MENU Pātene: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), KAUPAPA confirms selections, and ESC acts as a back button.

4. Tiaki

Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.

4.1 Te horoi

• Use a soft, dry cloth to clean the exterior of the controller.
• Mo te paru maro, paku dampen te kakahu ki te wai, ki te otinga horoi ngawari, kore-abrasive ranei.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
• Ensure no liquids enter the device through openings or ports.

4.2 Rokiroki

• Ki te kore e whakamahia mō te wā roa, rongoatia te kaiwhakahaere ki te wāhi hauhautanga, maroke, kia matara atu i te rā tika me te pāmahana tino kino.
• Tiakina te taputapu mai i te puehu me te makuku.

5. Te Raru

Ko tenei waahanga e whakarato ana i nga otinga mo nga take noa ka pa ki a koe.

5.1 Karekau he Mana

• Tirohia te Puna Hiko: Me whakarite kei te hono tika te urutau hiko ki te kaiwhakahaere me te putanga hiko e mahi ana.
• Tirotiro PoE: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
• Tikanga taura: Inspect the power cable and Ethernet cable for any damage.

5.2 Cannot Control Camera

• Hononga Whatunga: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
• Tauritenga Kawa: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
• ID kāmera: Ensure the correct camera ID is selected on the controller.
• Takiuru Taipitopito: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web atanga.
• Hononga Rangatū: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
• Pūmanawa: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webpae mo nga whakahou.

5.3 Ngā Take o te Whakaaturanga LCD

• Kore Whakaatu: Me mohio kei te kaha te mana o te kaiwhakahaere.
• Whakaaturanga Ataahua: Check if there are any brightness settings on the controller that can be adjusted.

6. Whakatakotoranga

Image 6.1: Controller dimensions and typical usage environments.

Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.

7. Whakaaturanga Ataata Hua

Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.

8. Pūtāhui me te Tautoko

For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official webpae.

• Kaihanga: Xiamen RGBlink Science & Technology Co.,Ltd.
• Whaimana Webpae: www.rgblink.com (Tuhipoka: He waahi tenei URL, please refer to your product packaging or official documentation for the correct support webpae.)
• Mōhiohio Whakapā: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.