GAOMON 6-Drawer Dresser with Charging Station and LED Lights

1. Nga Korero Haumaru Nui

Tena panuihia me te mohio ki nga tohutohu katoa i mua i te huihuinga me te whakamahi. Puritia tenei pukapuka hei tohutoro a meake nei.

• Pūrere Anti-Tipping: This dresser includes an anti-tipping device. It is crucial to install this device securely to a wall to prevent serious injury from tipping furniture.
• Raukaha Taumaha: Do not exceed the recommended weight capacity for the top surface or drawers. Overloading can compromise stability and cause damage.
• Haumaru Hiko: The built-in charging station contains electrical components. Ensure the power cord is not pinched or damaged. Do not expose the charging station to liquids.
• Huihuinga: Assembly should be performed by at least two adults. Follow all steps carefully.
• Tamariki: Puritia ngā tamariki kia matara atu i te wāhi huihuinga. Kaua e tukua ngā tamariki kia piki ki runga, kia tākaro rānei ki te kāpata.

Whakaahuatanga Whakaahua: This image illustrates the importance of the anti-tipping design. It shows a dresser securely anchored to a wall with a child pulling on a drawer, indicating stability. A contrasting image shows a dresser without an anti-tipping device, tipping over when a child pulls on it, highlighting the hazard.

2. Ihirangi mokete

Before beginning assembly, verify that all parts and hardware are present and undamaged. If any parts are missing or damaged, contact customer support.

• Ngā panera o te rūma whakakakahu (runga, raro, taha, muri)
• 6 Drawer fronts, sides, and bottoms
• Drawer slides (ball-bearing)
• Gold metal handles
• Built-in charging station with power cord
• RGB LED light strip with controller
• He taputapu anti-tipping
• Ko nga taputapu whakahiato (nga kaitapa, nga toka, nga raka kamera, me etahi atu)
• He pukapuka tohutohu

3. Nga Tohutohu Huihuinga

Follow the step-by-step instructions provided in the included assembly guide. All parts are labeled for easy identification. Two people are recommended for assembly.

3.1 General Assembly

1. Wewetehia nga waahanga katoa ka whakatakoto ki runga i te mata ma, ngawari kia kore e pakaru.
2. Identify each part using the labels and the assembly diagram.
3. Assemble the main frame of the dresser according to the numbered steps in the guide. Ensure all connections are secure.
4. Attach the back panel for structural integrity.

3.2 Huinga Kaiutuutu

1. Assemble each of the 6 drawers by connecting the sides, front, and bottom panels.
2. Install the ball-bearing drawer slides onto the drawer sides and the dresser frame. Ensure they are aligned for smooth operation.
3. Attach the gold metal handles to the drawer fronts.
4. Whakauruhia ngā pouaka kua huihuia ki roto i te anga o te kāpata.

3.3 Anti-Tipping Device Installation

1. Position the dresser in its desired location.
2. Securely attach the anti-tipping bracket to the back of the dresser, near the top.
3. Mark the corresponding spot on the wall. Drill a pilot hole if necessary.
4. Attach the wall bracket to the wall using appropriate hardware for your wall type (e.g., wall anchors for drywall).
5. Connect the dresser bracket to the wall bracket using the provided strap or cable. Ensure it is taut.

3.4 LED Light Strip Installation

1. Carefully adhere the RGB LED light strip to the designated areas within the open display spaces of the dresser.
2. Connect the LED strip to the provided controller.
3. Route the power cable for the LED lights to the charging station's power outlet or another suitable power source.

3.5 Charging Station Integration

1. Place the built-in charging station into its designated cutout on the dresser top.
2. Route the charging station's power cord through the cable management hole and plug it into a wall outlet.

Whakaahuatanga Whakaahua: This image highlights four key assembly and design features: (1) Spacious Storage Space, (2) Anti-fall Device Included, (3) Easy Pull Out Slide Rail, and (4) Back Panel Closure. These elements are crucial for proper assembly and functionality.

4. Nga Tohutohu Whakahaere

4.1 LED Lights Operation

The integrated RGB LED light strip is controlled by a button located near the lights.

• Hiko Whakaka/Weto: Press the button once to turn the lights on. Press again to turn them off.
• Huri Tae/Aratau: While the lights are on, press the button repeatedly to cycle through various colors and lighting modes.
• Whakaritea te Tirohanga: Some models may allow brightness adjustment by holding the button or through specific button presses. Refer to the detailed LED controller instructions if provided separately.

Whakaahuatanga Whakaahua: This image displays the adjustable RGB light strips in various colors (red, blue, green, purple, yellow, cyan) within the dresser's open compartments. It also points out the 'Key Control' button used to turn the lights on and off and change settings.

4.2 Whakamahinga Teihana Teihana

Mā te teihana utu kua hangaia ki roto ka watea te urunga hiko mō āu taputapu hiko.

• Putanga AC: Plug standard AC-powered devices into the two 125V/12A AC outlets.
• Tauranga USB: Connect USB-powered devices to the two 5V/2A USB ports for charging.
• Waea Hiko: Ensure the 3.3-foot power cord is securely plugged into a functional wall outlet.

Whakaahuatanga Whakaahua: He taipitopito view of the built-in charging station, showing its two AC outlets (125V/12A) and two USB ports (5V/2A). The image also indicates the length of the power cord (3.3 feet) for connection to a wall outlet.

4.3 Mahinga Kaiutuutu

The drawers are equipped with ball-bearing slides for smooth and quiet operation.

• Pull drawers open and push closed gently. Avoid forcing them.
• Do not overload drawers to ensure smooth movement and prevent damage to the slides.

Whakaahuatanga Whakaahua: This image highlights three design aspects: smooth sliding drawers with ball-bearing mechanisms, a 1-inch thickened tabletop for durability and weight support, and a stable base that enhances the dresser's overall load-bearing capacity.

5. Tiaki me te Tiaki

• Te horoi: Horoia nga mata o te kakahu ki te ngohengohe, damp kakahu. A ape i nga matū kino, i nga kai horoi horoi ranei, ka pakaru te mutunga.
• Maringi: Horoia nga pakaru kia kore ai e poke, kia kino ranei te rakau i hangaia.
• Puehu: Regularly dust the dresser with a dry, soft cloth.
• Kiriata Kaiutuutu: Tirohia nga kiriata pouaka mo te mahi maeneene. Mena ka maro, ka taea te whakamahi i te hinu hinu hinu iti.
• Wae Hiko: Ensure the charging station and LED lights remain dry. Do not attempt to clean them with liquids while plugged in.

6. Te Raru

7. Whakatakotoranga Hua

Whakaahuatanga Whakaahua: This diagram provides precise measurements of the dresser: 47.24 inches wide, 15.35 inches deep, and 31.49 inches high. It also shows the dimensions of the top open compartment (5.31 inches high) and a drawer (21.65 inches wide, 11.81 inches deep, 2.75 inches high).

8. Pūtāhui me te Tautoko

8.1 Kaupapa Whakahoki

This product is eligible for a 30-day easy return policy. Please refer to your retailer's specific return guidelines for detailed information on initiating a return or exchange.

8.2 Tautoko Kiritaki

For any questions, missing parts, or assistance with assembly or operation, please contact GAOMON customer support. Contact information can typically be found on the product packaging or the retailer's webpae.