Kupu Whakataki
This manual provides detailed instructions for the assembly, operation, and maintenance of your Polibi Full Size Upholstered Platform Bed. Please read all instructions carefully before assembly and use to ensure safe and proper functionality of the product.
Nga korero haumaru
WHAKATŪPATO: Failure to follow these safety instructions could result in serious injury or damage to the product.
- Kaua e taea e nga tamariki nga taputapu huihui katoa.
- Me whakarite kia mau te kati me nga raka i mua i te whakamahi. Tirohia i ia wa me te whakapiri ano ina tika.
- Do not exceed the maximum weight capacity: 600 lbs for the main bed, 250 lbs for the trundle.
- Whakamahia i runga i te mata papatahi, papatahi.
- Kaua e tū, kaua hoki e peke i runga i te moenga.
- Exercise caution when extending or retracting the trundle bed to avoid pinching.
- Ensure electrical connections for the charging station are properly installed and not overloaded. Disconnect power before cleaning or if any damage is observed.
Ihirangi mokete
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact Polibi customer support.
- Upholstered Headboard and Side Rails
- Bed Slats and Support Legs
- Trundle Bed Frame and Slats
- Integrated Desk and Storage Shelves
- Charging Station Unit (USB ports and outlets)
- Pūmārō Huinga (ngā tīwiri, ngā raka, te kuihi Allen)
- Pukapuka Tohutohu
Tatūnga me te Runanga
Assembly typically requires two adults. Please follow the steps below in sequence.
Hipanga 1: Wetewete me te Tautuhia nga Waahanga
Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches. Refer to the parts list in your included manual to identify each component.
Whakaahua 1: Ka mutuview of the Polibi Full Size Upholstered Platform Bed, showcasing the main bed, integrated desk, storage shelves, and charging station.
Step 2: Assemble the Main Bed Frame
Connect the headboard, footboard, and side rails using the provided hardware. Ensure all connections are snug but do not overtighten until all parts are aligned.
Image 2: The main bed frame structure with wooden slats in place, ready for mattress placement.
Hipanga 3: Tāutahia ngā papa moenga
Evenly space and secure the wooden bed slats across the frame. This provides support for your mattress. Ensure all slats are firmly attached to prevent movement.
Step 4: Assemble the Integrated Desk and Storage
Attach the desk and storage shelf components to the main bed frame as indicated in the detailed assembly diagram. These sections are designed to integrate seamlessly with the bed's structure.
Whakaahua 3: Taipitopito view of the integrated desk, storage shelves, and the built-in charging station with USB ports and power outlets.
Step 5: Install the Charging Station
Carefully insert the charging station unit into its designated slot on the desk/storage component. Ensure it is flush and secure. Connect the power cord to a wall outlet after the bed is fully assembled and positioned.
Hipanga 6: Huihui te Moenga Trundle
Assemble the trundle bed frame and install its slats. The trundle is designed to slide underneath the main bed. Ensure the wheels are properly attached for smooth operation.
Image 4: The Polibi bed with the trundle frame visible, showing how it slides out from underneath the main bed.
Hipanga 7: Whakamutunga Whakamutunga me te Whakanoho
Once all components are assembled, go back and securely tighten all bolts and screws. Position the bed in its desired location. Plug in the charging station.
Image 5: Dimensional diagram illustrating the overall length (88.5"), width (66.5"), and height (29.5") of the Polibi bed.
Nga Tohutohu Whakahaere
Te Whakamahi i te Moenga Trundle
To extend the trundle bed, gently pull the handle located on the front panel of the trundle. The trundle will roll out smoothly on its wheels. To retract, push the trundle back underneath the main bed until it is fully concealed.
Image 6: The Polibi bed with the trundle fully extended, demonstrating its functionality as an additional sleeping space.
Ma te whakamahi i te teihana utu
Once the bed is assembled and the charging station is plugged into a wall outlet, you can use the two standard AC outlets and two USB ports to power or charge your electronic devices. Ensure devices are compatible with the provided power output.
Utilizing the Desk and Storage Shelves
The integrated desk provides a convenient surface for laptops, books, or other items. The storage shelves offer space for organizing personal belongings, books, or decorative items. Distribute weight evenly on shelves.
Te tiaki
- Te horoi: Mo te papanga whakakikoruatia, ata tirohia kia ma ki te panuiamp cloth and mild detergent. Avoid harsh chemicals. For wooden or MDF surfaces, wipe with a dry or slightly damp kakahu.
- Taki Pūmārō: Tirohia ngā pūtu me ngā tīwiri katoa i ia wā, kia mau tonu ai. Whakamaua anō mēnā e tika ana kia mau tonu ai te pumau.
- Tikanga Whakateretere: Keep the trundle wheels and tracks free of debris to ensure smooth operation.
- Wae Hiko: Ensure the charging station is kept dry. Do not attempt to repair damaged electrical components; contact a qualified technician or customer support.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Ko te moenga ka kore e u, ka wiri ranei. | Nga taputapu wetekina. | Tirohia me te whakakoi i nga tutaki me nga wiri katoa. Me whakarite kei runga te moenga i te papa taumata. |
| Kaore e paheke marie ana a Trundle. | Debris in tracks, damaged wheels, or uneven floor. | Clean tracks. Inspect wheels for damage. Ensure the bed is on a level surface. |
| Karekau e mahi te teihana utu. | Kaore i whakauruhia, hikoitage, he waeine hapa rānei. | Ensure the power cord is securely plugged into a working wall outlet. Check circuit breaker. If issues persist, contact customer support. |
| Kua ngaro nga waahanga i te wa e huihui ana. | He hapa te takai. | Contact Polibi customer support with your purchase details and a list of missing parts. |
Whakatakotoranga
- Waitohu: polybi
- Tauira: B0FM3XGX96
- Rahi: Ki tonu
- Rahi Hua (L x W x H): 88.5" x 66.5" x 29.5"
- Rauemi: Pine Wood + MDF, Upholstered (Velvet Fabric, High-Density Foam)
- Weight Capacity (Main Bed): 600 lbs
- Weight Capacity (Trundle): 250 lbs
- Nga waahanga motuhake: Integrated Charging Station (2 AC outlets, 2 USB ports), Storage Shelves, Pull-out Trundle Bed, Desk
- Huihuinga e hiahiatia ana: Ae
Pūtāhui me te Tautoko
For warranty information, missing parts, or technical assistance, please contact Polibi customer support. Keep your purchase receipt and model number (B0FM3XGX96) handy for faster service.
Polibi Customer Support: Refer to the contact information provided with your purchase or visit the official Polibi webpae.
