Pard USA Bobcat 480 Thermal Monocular Instruction Manual

1. Hua Neke Atuview

The Pard USA Bobcat 480 is a compact thermal imaging monocular designed for observation and ranging. It features a 35mm objective lens, 3.5x optical magnification, and 8x digital zoom, providing clear thermal visibility across various distances. The device incorporates a 480x360 thermal sensor with a 12µm pixel pitch and a sensitivity of ≤18mk, allowing for detection of subtle temperature differences. An integrated laser rangefinder (LRF) offers accurate distance measurements up to 1,000 meters (1,094 yards). The vivid 1920x1080 OLED display enhances image brightness, detail, and contrast. Its compact dimensions (1.77 x 2.13 x 6.14 inches) ensure portability and ease of use in diverse conditions.

Āhuatanga matua:

• 35mm objective lens with 3.5x optical and 8x digital zoom.
• 480x360 thermal sensor with 12µm pixels for enhanced clarity.
• Built-in laser rangefinder (LRF) accurate up to 1,000 meters (1,094 yards).
• NETD ≤18mk sensor for detecting small heat signatures.
• 1920x1080 OLED display for bright and sharp contrast.
• Tuhinga o mua View (FOV): 16.5 m @100 m (11.7° diagonal FOV).
• Compact size: 1.77 x 2.13 x 6.14 inches for portability.

2. Nga Waahanga me nga Mana Whakahaere

Familiarize yourself with the physical components and control buttons of your Bobcat 480 monocular.

Whakaahua 2.1: Matua view of the Pard USA Bobcat 480 Thermal Monocular, showcasintōna hoahoa kiato me te pupuri ergonomic.

Whakaahua 2.2: Mua view of the monocular, highlighting the 35mm objective lens and integrated laser rangefinder components.

Whakaahua 2.3: Te taha profile of the monocular, showing the arrangement of the control buttons for power, zoom, menu, and rangefinding.

Whakaahua 2.4: runga-iho view illustrating the layout of the control buttons and the eyepiece adjustment dial.

Nga Mahi Patene:

• Pātene Hiko: Pēhi me te pupuri kia whakakā/whakaweto.
• Zoom/LRF Button: Short press to activate laser rangefinder. Long press to adjust digital zoom levels.
• Patene Tahua: Uru ki te tahua matua mo nga tautuhinga me nga whiringa.
• Mode/Palette Button: Cycle through different thermal color palettes (e.g., White Hot, Black Hot, Red Hot, Color).
• Whakatikatika kanohi: Rotate the dial near the eyepiece to adjust diopter for clear focus.
• Tauranga USB-C: Located at the bottom, used for charging and data transfer. Covered by a protective cap.
• Maunga Takitoru: Standard 1/4-20 thread for mounting on tripods or other accessories.

3. Tatūnga

3.1 Tāuta Pūhiko

The Bobcat 480 uses a replaceable 18650 rechargeable battery. To install or replace the battery:

1. Locate the battery compartment on the side of the monocular.
2. Whakatuwheratia te uhi o te wahanga pākahiko.
3. Insert the 18650 battery according to the polarity indicators (+/-) inside the compartment.
4. Katia kia mau te uhi o te wahanga pākahiko.

3.2 Te utu

Hei utu i te pākahiko:

1. Connect the provided USB-C cable to the monocular's USB-C port.
2. Honoa te pito o te taura ki tētahi pūtake hiko USB hototahi (hei tauira, te urutau pakitara, te pēke hiko).
3. The device's indicator light will show charging status.
4. Alternatively, the 18650 battery can be charged using an external battery charger (included).

4. Nga Tohutohu Whakahaere

4.1 Hiko / Whakaweto

• Whakahiko: Press and hold the Power Button for approximately 3 seconds until the display activates.
• Weto Whakakore: Press and hold the Power Button for approximately 3 seconds until the display shuts down.
• Aratau Whakatika: The device may enter standby mode automatically when inverted or laid down to conserve battery.

4.2 Mahi Taketake

• Whakatikatika Arotahi: Rotate the eyepiece adjustment dial to achieve a sharp image for your vision.
• Topa: Use the Zoom/LRF button to cycle through available digital zoom levels.
• Thermal Palettes: Press the Mode/Palette button to switch between different thermal display modes (e.g., White Hot, Black Hot, Red Hot, Color).
• Kaiwhaiwhai Taiaho: Short press the Zoom/LRF button to activate the laser rangefinder and measure distances.

5. Tiaki

5.1 Te horoi

• Arotahi: Use a soft, lint-free cloth (e.g., microfiber) specifically designed for optics. Gently wipe the lens surfaces to remove dust or smudges. For stubborn dirt, use a small amount of lens cleaning fluid.
• Tinana: Horoia te tinana o te monocular ki te ngohengohe, damp kakahu. A ape i nga matū kino, i nga taonga abrasive ranei.

5.2 Rokiroki

• Store the monocular in a cool, dry place away from direct sunlight and extreme temperatures.
• Mena ka roa te rokiroki, tangohia te pākahiko hei ārai i te turuturu.
• Keep the lens caps on to protect the objective lens and eyepiece.

6. Te Raru

Nga take me nga otinga noa:

• Kaore te taputapu i te hiko: Ensure the battery is correctly installed and fully charged. Try replacing the battery.
• He rangirua te ahua: Adjust the eyepiece diopter for your vision. Ensure the objective lens is clean.
• Rangefinder not working: Ensure the target is within the specified range (1,000 meters) and there are no obstructions.
• Poor thermal image quality: Check for extreme environmental conditions (e.g., heavy fog, rain) that might affect thermal performance. Ensure the lens is clean.

7. Whakatakotoranga

8. Pūtāhui me te Tautoko

Mōhiohio Pūtāhui:

The Pard USA Bobcat 480 Thermal Monocular comes with a warranty as described by Amazon. Please refer to your purchase documentation or Amazon's warranty policies for specific details regarding coverage and duration.

Tautoko Kiritaki:

For any technical assistance, troubleshooting, or warranty claims, please contact Pard customer service or the authorized retailer from whom the product was purchased. You may also visit the official Pard store on Amazon for additional resources and support.

Pard Store on Amazon: Visit the Pard Store