Kupu Whakataki
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your Fenix PD26R ACE 1300 Lumen Rechargeable EDC Flashlight. Please read this manual thoroughly before using the product.
Image: The Fenix PD26R ACE 1300 Lumen Rechargeable EDC Flashlight.
Ihirangi mokete
Manatokohia ko nga mea katoa kei raro nei kei roto i to kete:
- Fenix PD26R ACE Flashlight
- ARB-L18-1600 Rechargeable Battery
- USB-C Uira Whakatau
- Holster
- Lanyard
- LumenTac Organizer
- Pukapuka Kaiwhakamahi (tenei tuhinga)
Image: Fenix PD26R ACE flashlight with USB-C charging cable and LumenTac organizer.
Nga waahanga matua
- Putanga Kaha: Up to 1300 lumens with a 387-yard beam distance.
- Hoahoa Kiato: Slim 4.17-inch body, weighing 3.6 ounces for everyday carry.
- Customizable Operation (ACE Technology): Three distinct mode sets for tactical, security, or everyday use.
- Mana Whakawhiti Takirua: Tail switch for instant on/off, side switch for mode selection.
- USB-C Ka taea te utu: Fast charging with a built-in battery indicator.
- Hanga Roa: IP68 waterproof and impact-resistant anodized aluminum body.
Tatūnga
1. Tāuta Pūhiko
The Fenix PD26R ACE uses one ARB-L18-1600 rechargeable Lithium-Ion battery. Ensure the battery is inserted with the positive (+) end facing towards the flashlight head.
2. Te Whakataki i te Pūhiko
To charge the flashlight, locate the hidden USB-C charging port. This port is revealed by twisting the section of the flashlight body directly opposite the side switch. Connect the provided USB-C cable to the flashlight and a power source. The battery indicator will show charging status.
Image: Close-up of the Fenix PD26R ACE showing the hidden USB Type-C charging port.
A full charge typically takes approximately 2 hours. The battery indicator light will change color and/or flash to indicate the remaining battery life:
- Kākāriki mārō: 100% - 85%
- Kohiko Kakariki: 85% - 50%
- Whero Mārō: 50% - 25%
- Rama Whero: 25% - 1% (Critical amount, recharge immediately)
Image: Close-up of the side switch with the battery indicator light, showing different colors for battery levels.
Nga Tohutohu Whakahaere
1. Power On/Off (Tail Switch)
The tail switch controls the basic on/off function:
- Moemata i runga: Tap the tail switch.
- Ka Ka/Weto Tonu: Pēhia katoatia te pātene hiku kia pāwhiri rā anō.
2. Mode Selection (Side Switch)
Once the flashlight is on, use the side switch to cycle through the various brightness levels and special modes (Strobe, SOS) available in the currently selected SET mode.
3. SET Mode (ACE Technology)
The Fenix PD26R ACE features three distinct SET modes, allowing you to customize the available light levels based on your needs. To change the SET mode, press the 'SET' button located near the head of the flashlight. The indicator lights (1, 3, 5) will show the currently active SET mode.
Image: Diagram illustrating the three SET modes and their corresponding output options (Eco, Low, Med, High, Turbo, Strobe, SOS).
- Option 1 (Tactical Operation): Provides access to Turbo and Strobe modes for high-intensity situations.
- Option 2 (Security Duty): Offers Eco, Low, High, Turbo, and Strobe modes, suitable for patrols and security checks.
- Option 3 (Everyday Outdoor Activity): Includes all five brightness levels (Eco, Low, Medium, High, Turbo), plus Strobe and SOS, for versatile daily and outdoor use. This is the initial default setting.
Strobe mode can be turned off separately by holding down the SET button if it is not desired in any of the options.
Image: Diagram highlighting the Tactical Tail Switch, SET Switch, and Neck-Mounted Switch for efficient operation.
4. Light Levels and Run Times
The flashlight offers various output levels:
| Aratau | Putanga | Tawhiti | Wā whakahaere |
|---|---|---|---|
| Paoro | 1300 rama | 354 mita (387 iari) | 1 haora 2 meneti |
| Teitei | 350 rama | 190 mita (208 iari) | 2 haora 13 meneti |
| Waenga | 100 rama | 98 mita (107 iari) | 8 haora 35 meneti |
| Iti | 30 rama | 54 mita (59 iari) | 27 haora 7 meneti |
| Eco | 1 lumen | 8 mita (9 iari) | 556 haora |
| Strobe | 1300 rama | N/A | N/A |
| SOS | 30 rama | N/A | N/A |
Note: Turbo output is measured in total of runtime including output at reduced levels due to temperature or protection mechanism. Specifications are based on Fenix laboratory testing using one Fenix ARB-L18-1600 battery under 21±3°C and 50%-80% humidity. Actual performance may vary.
Image: Detailed technical parameters table for the Fenix PD26R ACE.
Ataata Hua Whaimana
Video: "Little Light in a Big World | PD26R ACE" by Lumen Tactical (Seller). This video provides an overview of the Fenix PD26R ACE flashlight, demonstrating its features, light output, and different mode sets.
Te tiaki
- Te horoi: Clean the flashlight body and threads regularly with a soft cloth.
- Whakahinuhinu: Apply a thin layer of silicone grease to the O-rings periodically to maintain water resistance.
- Tiaki Pūhiko: Remove the battery if the flashlight will not be used for an extended period. Store batteries in a cool, dry place.
- Ātete wai: The flashlight is IP68 rated, meaning it is dustproof and submersible up to 2 meters for 30 minutes. Ensure O-rings are intact and properly seated before exposure to water.
Raparongoā
If your Fenix PD26R ACE flashlight is not functioning correctly, please refer to the following common issues and solutions:
- Kare te rama e ka ana:
- Check if the battery is inserted correctly with the positive (+) end towards the head.
- Me whakarite kei te utaina te pākahiko.
- Kia mau te whakamau i te potae hiku.
- Intermittent operation or flickering:
- Clean the battery contacts and the flashlight's contact points with an alcohol swab.
- Kia mohio kua oti te puhiko.
- Check for loose connections in the tail cap or head.
- Brightness decreases or mode changes unexpectedly:
- This may be due to the intelligent overheat protection. The flashlight will automatically downshift to a lower brightness level to prevent overheating. Allow the flashlight to cool down.
- Check the battery level; low battery can affect maximum output.
If the issue persists after trying these steps, please contact Fenix customer support for further assistance.
Whakatakotoranga
- Puna Maama: LED
- Putanga Morahi: 1300 Lumens
- Raupapa Beam: 354 mita (387 iari)
- Puna Hiko: 1x ARB-L18-1600 Lithium-Ion Battery (included)
- Kei te utu: USB-C Ka taea te utu
- Rauemi: Konumohe Anodized
- Ahu: 4.17" (Length) x 0.97" (Head Diameter) x 1.05" (Body Diameter)
- Taumaha: 3.68 hekere (tae atu ki te puhiko)
- Ātete wai: IP68 (2 meters submersible for 30 minutes)
- Atete Paanga: 1 mita
- Nga waahanga motuhake: Adjustable Light Modes (ACE Technology), Durable, High Lumens, Rechargeable, Weatherproof
Pūtāhui me te Tautoko
Fenix products are covered by a limited warranty. For specific warranty terms and conditions, or to obtain support, please refer to the official Fenix website or contact your authorized Fenix dealer. Keep your purchase receipt as proof of purchase for warranty claims.
