Marstek Venus E GEN 3.0 AC Storage System User Manual

1. Kupu Whakataki

The Marstek Venus E GEN 3.0 is a powerful and flexible AC energy storage system designed for residential and small commercial applications. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before installation and use.

Key features include a compact design, integrated Plug & Play technology for quick setup, dedicated LAN port for stable communication, and expandability up to 7.5 kW power and 15.36 kWh storage capacity. It also offers an integrated backup power output of up to 2,500 W during outages and is 100% compatible with existing PV installations.

Whakaahua 1: Ka mutuview of Marstek Venus E GEN 3.0 key features, including new design, PV system compatibility, stable LAN connection, expandability, MARSTEK Intelligence, 2500W on-grid input/output, 6000+ life cycles, 10-year warranty, grid feed-in with smart meter, and potential annual savings.

2. Nga Tohutohu Haumaru

Always adhere to the following safety guidelines to prevent injury, damage to the device, or property damage:

• Pānuihia nga tohutohu katoa i mua i te whakahaere i te taputapu.
• Kaua e ngana ki te wetewete, ki te whakatika, ki te whakarerekē rānei i te waeine. Tukuna ngā mahi tiaki katoa ki ngā kaimahi whai tohu.
• Me whakarite kia tika te hau huri noa i te waahanga. Kaua e araia nga whakatuwheratanga hau.
• Keep the device away from water, moisture, and flammable materials.
• Whakamahia ngā taputapu kua whakaratohia, kua whakaaetia rānei anake.
• Do not operate the device if it has been damaged in any way.
• Ensure the unit is installed on a stable, level surface.
• This device contains a LiFePO4 battery. Handle with care and dispose of according to local regulations.

3. Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i te kete:

• Marstek Venus-E GEN 3.0 Unit
• Te Hiko AC
• Antena Wi-Fi
• Whakapuru Taonga
• Pukapuka Kaiwhakamahi (tenei tuhinga)

4. Tatūnga

4.1 Te Wetewete me te Whakanoho

Carefully remove the Venus E GEN 3.0 from its packaging. Place the unit on a flat, stable surface in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure sufficient clearance for air circulation around the unit.

Whakaahua 2: Whakamuri view of the Marstek Venus E GEN 3.0, highlighting the ventilation fins for optimal heat dissipation.

4.2 Te Hono atu ki te Mana

1. Connect the provided AC power cable to the AC input port on the Venus E GEN 3.0.
2. Plug the other end of the AC power cable into a grounded wall outlet.
3. The unit will automatically begin charging or enter standby mode.

Whakaahua 3: Side panel of the Marstek Venus E GEN 3.0, showing the protective cover open to reveal the AC input and output ports for connecting to the grid and appliances.

4.3 Network Connection (LAN/Wi-Fi)

For optimal performance and smart features, connect the device to your home network.

• Hononga LAN: For a stable and faster connection, use an Ethernet cable to connect the dedicated LAN port on the Venus E GEN 3.0 to your router.
• Hononga Wi-Fi: Attach the provided Wi-Fi antenna to the designated port. Follow the instructions in the MARSTEK app to configure the Wi-Fi connection.

4.4 Hiko Tuatahi

Press and hold the power button on the unit for a few seconds until the indicators light up. The unit will perform a self-check. Refer to the display indicators for status.

Whakaahua 4: Front panel of the Marstek Venus E GEN 3.0, displaying LED indicators for WARN, GRID, BACKUP, BATTERY level, CT, WIFI, and BT status.

5. Nga Tohutohu Whakahaere

5.1 MARSTEK App Control

The Venus E GEN 3.0 is primarily controlled via the MARSTEK mobile application. Download the app from your device's app store.

1. Install the MARSTEK app on your smartphone.
2. Rēhita he pūkete ka takiuru.
3. Follow the in-app instructions to add your Venus E GEN 3.0 device.
4. Through the app, you can monitor energy flow, battery status, and select operating modes.

5.2 Aratau Mahi

The MARSTEK app offers various operating modes to optimize energy usage:

• Self-Consumption Mode: Prioritizes using stored energy from the battery or solar panels before drawing from the grid.
• Manual Control Mode: Allows direct control over charging and discharging times.
• AI Optimized Mode: Utilizes dynamic electricity tariffs, consumption habits, and weather forecasts to automatically optimize charge/discharge cycles for maximum savings.

5.3 Backup Power Function

Ina he mana outage, the integrated backup output provides up to 2,500 W of power to essential appliances. For full home backup (single-phase or three-phase), additional equipment may be required.

Whakaahua 5: Schematic illustrating a single-phase backup system configuration, showing how multiple Marstek Venus E GEN 3.0 units can be integrated with a Smart Box and the grid to provide backup power to household loads.

Whakaahua 6: Schematic illustrating a three-phase backup system configuration, detailing the connection of multiple Marstek Venus E GEN 3.0 units, a Smart Box, PV inverters, and micro-inverters to the grid and household backup loads.

6. Tiaki

Regular maintenance ensures the longevity and optimal performance of your Venus E GEN 3.0.

• Te horoi: Whakamahia he kakahu ngohengohe, maroke hei horoi i waho o te waahanga. Kaua e whakamahia nga kai horoi wai, nga whakarewa ranei.
• Whakahau: Periodically check that the ventilation openings are free from dust and debris.
• Whakahōu Firmware: Ensure the MARSTEK app and device firmware are kept up-to-date for new features and performance improvements.
• Hauora Pūhiko: The LiFePO4 battery is designed for over 6,000 charge cycles. Monitor its health via the MARSTEK app.

Whakaahua 7: The Marstek Venus E GEN 3.0 demonstrating its robust design and IP65 protection, suitable for operation in various environmental conditions, including snow and rain.

7. Te Raru

Mena ka raru koe, tirohia nga raru me nga otinga e whai ake nei:

For issues not listed here, please contact Marstek customer support.

8. Whakatakotoranga

9. Raihana me te Tautoko

9.1 Nga Korero Whakaputanga

The Marstek Venus E GEN 3.0 comes with a 10-tau pūtāhui on the integrated LiFePO4 battery, ensuring long-term reliability with over 6,000 charge cycles while maintaining 80% capacity. Please retain your proof of purchase for warranty claims.

9.2 Tautoko Kiritaki

For technical assistance, warranty claims, or further inquiries, please contact Marstek customer support through their official website or the MARSTEK app. Ensure you have your model number (MVE3) and purchase details ready.

Whaimana Webpae: www.marstek.com (Tuhipoka: He waahi tenei URL, tirohia koa ngā tuhinga mō tō hua mō te tautoko tuturu webpae.)