Kupu Whakataki
Thank you for choosing the Lifepro HydroLife Peak Hydrogen Water Bottle Generator. This portable device utilizes advanced SPE/PEM technology to enrich your drinking water with up to 8000ppb of hydrogen, supporting your daily hydration and active lifestyle. This manual provides essential information for the safe and effective use of your new hydrogen water bottle.
Image: Lifepro HydroLife Peak Hydrogen Water Bottle, front view.
Ka mutu te huaview
The HydroLife Peak is engineered for performance and convenience, featuring a robust design and user-friendly interface.
- High Hydrogen Concentration: Utilizes platinum-coated titanium plates and a proton exchange membrane (SPE/PEM) to produce water with up to 8000ppb hydrogen.
- Whakaatu OLED: Provides real-time information on hydrogen levels and cycle duration.
- Kawe me te utu ano: Equipped with a 2000mAh battery and USB-C charging for use anywhere.
- Hanga Roa: Made from aviation aluminum and food-grade polycarbonate for lightweight, leak-resistant daily use.
- Mahi ngawari: Single-button control for 5-minute or 10-minute hydrogen generation cycles.
Whakaahua: Pahū view of the HydroLife Peak components.
Tatūnga
- Tirohanga Tuatahi: Upon receiving your HydroLife Peak, you may notice some water inside. This is normal as the generator is shipped pre-hydrated to protect its components and ensure optimal performance.
- Kei te utu: Before first use, fully charge the device using the provided USB-C charging cable. The OLED display will indicate charging status.
- Huihuinga: Ensure the bottle is securely screwed onto the base. The leak-resistant design requires a firm connection.
Image: Product arriving pre-hydrated for convenience.
Nga Tohutohu Whakahaere
Follow these steps to generate hydrogen-rich water:
- Fill the Bottle: Unscrew the top lid and fill the bottle with potable water, leaving about an inch of space from the top. The HydroLife Peak is compatible with filtered and bottled water.
- Tīpako Porohita: Press the power button on the base to initiate a hydrogen generation cycle. A single press typically starts a 5-minute cycle, while a double press may activate a 10-minute cycle (refer to specific model instructions for exact button functions). The OLED display will show the remaining time and hydrogen concentration (PPM).
- Kia pai: Once the cycle is complete, the device will automatically shut off. Drink the hydrogen-rich water promptly for best results.
Image: Pressing the power button to start hydrogen generation.
Ataata Hua Whaimana
Video: Demonstrating the features and benefits of the Lifepro HydroLife Peak Hydrogen Water Bottle, including its ease of use and portability.
Te tiaki
Proper care ensures the longevity and performance of your HydroLife Peak.
- Horoi i ia rā: After each use, rinse the bottle and lid with clean water. The wide mouth design facilitates easy cleaning.
- Marama Hohonu Hohonu: For a thorough cleaning, disassemble the bottle and wash all parts (except the electronic base) with mild soap and water. Ensure all components are completely dry before reassembly.
- Electrolyzer Care: The electrolyzer should not be left dry for extended periods. If not used for a long time, ensure it is kept moist.
Image: Cleaning the HydroLife Peak Hydrogen Water Bottle.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e tahuna te taputapu. | He iti te pākahiko. | Me utu te taputapu ma te whakamahi i te taura USB-C. |
| No hydrogen bubbles generated. | Insufficient water or improper assembly. | Ensure water level is adequate and the bottle is securely attached to the base. |
| Te rerenga wai. | Lid or bottle not properly sealed. | Tighten the lid and ensure the bottle is correctly screwed onto the base. Check gaskets for damage. |
| OLED display not working. | Device off or battery low. | Press the power button to activate. Charge the device if the battery is low. |
Whakatakotoranga
- Waitohu: LifePro
- Ingoa Tauira: Hydrolife Peak
- Tauira Tūemi: LP-HYDLFPK-OCN
- Raukaha: 280 Miririta (9.5oz)
- Rahi Hua: 2.4"L x 2.4"W x 8.2"H
- Taumaha Tūemi: 12.3 hekere (0.77 Pauna)
- Rauemi: Polycarbonate, Aviation Aluminum
- Puna Hiko: Pūhiko (2000mAh)
- Tikanga purenga: Hydrogen Electrolysis (SPE/PEM Technology)
- Wai Tautoko TDS Taumata Morahi: 600 PPM
- Āhuahira Motuhake: Kawe
- Nga Waahanga Kei roto: Hydrogen Water Bottle, USB-C Charging Cable
Image: Dimensions and capacity of the HydroLife Peak.
Pūtāhui me te Tautoko
For warranty information, product registration, or technical support, please refer to the official LifePro webpaetukutuku, whakapā atu ranei ki ta raatau ratonga kaihoko. Puritia to riirii hoko mo etahi kereme whakamana.
Ka taea e koe te toro ki te LifePro Store on Amazon mo etahi atu korero hua me nga rauemi tautoko.
