Polibi Queen Size Platform Bed with Curved Headboard, 2 Drawers, and Twin XL Trundle

1. Kupu Whakataki

This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your Polibi Queen Size Platform Bed. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.

2. Nga korero haumaru

• Me whai i nga tohutohu a te huihuinga i nga wa katoa.
• Me whakarite kia mau te kati me nga raka i mua i te whakamahi. Tirohia i ia wa me te whakapiri ano ina tika.
• Do not exceed the recommended weight capacity for the bed frame or trundle.
• Puritia atu nga waahanga iti me nga taonga takai mai i nga tamariki kia kore ai e kowaowao.
• Whakamahia ki runga i te mata papatahi hei ārai i te kore pumau.

3. Ihirangi mokete

Before beginning assembly, verify that all components and hardware are present. Refer to the detailed parts list included in your product packaging. The main components include:

• Queen Size Bed Frame (Headboard, Footboard, Side Rails, Slats)
• Two (2) Large Storage Drawers
• One (1) Twin XL Size Trundle Bed Frame
• Huihuinga Taputapu me nga Utauta

Pikitia 3.1: Ngā Ahu me ngā Wāhanga o te Hua Neke atu i teview

4. Tatūnga me te Runanga

Assembly of the Polibi Queen Size Platform Bed is required. Please follow the step-by-step instructions provided in the separate assembly guide included with your product packaging. Ensure you have adequate space and a helper for easier assembly.

Nga Waahi Huihuinga Nui:

1. Wewetehia nga waahanga katoa ka tirotirohia ki te rarangi waahanga.
2. Huihuia ngā wāhanga o te pane o te papa me te waewae o te papa.
3. Tāpirihia ngā reera taha ki te pane o te moenga me te waewae o te moenga.
4. Install the bed slats onto the main frame.
5. Assemble the two storage drawers.
6. Assemble the Twin XL trundle bed frame.
7. Insert the assembled drawers and trundle into their respective positions under the main bed frame.

Figure 4.1: Bed Frame Structure and Slat Installation

Figure 4.2: Twin XL Trundle Frame

5. Nga Tohutohu Whakahaere

5.1 Te Whakamahi i nga Kaituku Rokiroki

The Polibi Queen Platform Bed includes two large storage drawers located on one side of the bed. These drawers are designed to slide smoothly on their casters for easy access.

• To open: Gently pull the drawer handle outwards.
• To close: Push the drawer inwards until it is fully recessed under the bed frame.
• A ape i te utaina i nga kaiutuutu kia pai ai te mahi me te aukati i te kino.

Figure 5.1: Accessing Storage Drawers

5.2 Deploying the Twin XL Trundle

The Twin XL trundle bed is designed for convenient guest accommodation and slides out from under the main bed frame.

• To deploy: Locate the trundle at the foot of the main bed. Gently pull the trundle frame outwards from under the main bed. It will roll on its casters.
• To retract: Push the trundle frame back under the main bed until it is fully recessed.
• Ensure the area around the trundle is clear before deploying or retracting.

Figure 5.2: Deploying the Twin XL Trundle

6. Tiaki

6.1 Te horoi

• For general cleaning, wipe the wood surfaces with a soft, damp kakahu.
• A ape i te whakamahi i nga matū kino, i nga kai horoi, i nga whakakoi ranei e kino ai te mutunga.
• Horoia wawetia ngā turuturu kia kore ai e poke.

6.2 Ngā Tirotirotanga o ngā Whakamau

• Periodically (e.g., every 3-6 months), check all bolts, screws, and connections to ensure they remain tight.
• Re-tighten any loose fasteners to maintain the bed's stability and structural integrity. Do not overtighten.

7. Te Raru

7.1 Ngā Haruru Pakū

• Take: Loose fasteners or friction between wood components.
• Rongoā: Check and tighten all assembly bolts and screws. If squeaking persists, apply a small amount of paraffin wax or silicone spray to contact points between slats and side rails.

7.2 Drawers Sticking or Not Sliding Smoothly

• Take: Overloaded drawers, debris in the tracks, or misaligned casters.
• Rongoā: Reduce the weight in the drawers. Clean any dust or debris from the caster wheels and the area they roll on. Check if the casters are properly attached and aligned.

7.3 Trundle Not Moving Easily

• Take: Obstruction, uneven flooring, or issues with trundle casters.
• Rongoā: Ensure no objects are blocking the trundle's path. Verify the bed is on a level surface. Check trundle casters for debris or damage; clean or replace if necessary.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

For warranty information, please refer to the documentation included with your product packaging or visit the official Polibi website. For customer support, assistance with parts, or further inquiries, please contact Polibi customer service through their official channels.

You can visit the Polibi Store for more information: Toa Polibi i Amazon