1. Hua Neke Atuview
The JONSBO N6 is a versatile Micro ATX NAS case designed for home server, NAS network storage, and high-performance computing applications. It features a robust design with extensive storage options and flexible power supply configurations, complemented by a North American black walnut veneer for aesthetic appeal.
Whakaahua: Ka mutuview of the JONSBO N6 NAS Case, highlighting its compact design and functionality.
2. Nga waahanga matua
- 9 Nga Takiwa Puku: Supports 9 x 3.5" HDD/SSD with hot-swap functionality.
- Power Supply Flexibility: Compatible with ATX (up to 220mm) and SFX (up to 100mm) power supply units, with multiple installation positions.
- Papamatua Hototahi: Supports ITX and Micro-ATX motherboards.
- GPU Support: Accommodates graphics cards up to 320mm in length (275mm with front AIO/fan).
- Pūnaha whakamatao: Multiple fan mounting positions (front, rear, left, right, hard drive bay) and support for 240mm AIO. Includes 2 pre-installed 120mm fans for hard drive cooling.
- Atanga o mua: USB 3.2 Gen2 Type-C x1, USB 3.0 x1 (Audio x1 + Mic x1 2-in-1).
- Solid Wood Decoration: Features North American black walnut veneer for aesthetic appeal.
3. Tatūnga me te Tāuta
3.1. Tāuta Puku Mārō
The JONSBO N6 features 9 hot-swappable drive bays for 3.5-inch HDDs or 2.5-inch SSDs. Follow these steps to install your drives:
- Remove the front panel to access the drive bays.
- Slide each hard drive into an available bay until it clicks into place.
- Secure the hard drives using the provided screws.
- Connect the SATA power cables from your power supply to each drive. Ensure proper power distribution, especially for enterprise-level drives (see section 5.1).
- Connect the SATA data cables from each drive to your motherboard.
- Organize cables using cable ties for better airflow and aesthetics.
Whakaahua: Mua view of the JONSBO N6, showing the 9 hot-swappable drive bays.
Whakaahua: Taipitopito view of the server-level hot-swappable backplane with SATA power and data connectors.
Video: Hard Drive Installation Example
Video: This video demonstrates the installation of hard drives into a chassis with similar drive cage mechanisms, including securing drives and connecting SATA power and data cables. While the specific case may differ, the general principles apply to the JONSBO N6.
3.2. Te Whakataunga Hiko Hiko
The N6 supports both ATX and SFX power supplies. Choose the appropriate mounting position based on your PSU size and other components.
Image: Illustrates various power supply installation positions within the JONSBO N6 case, supporting both ATX and SFX units.
Video: Power Supply Installation Example
Video: This video provides an introduction to installing components, including the power supply, in a NAS chassis. The general steps for mounting and connecting the power supply are applicable.
3.3. Motherboard and Component Installation
Install your ITX or Micro-ATX motherboard, CPU, CPU cooler, and GPU according to standard PC building practices. Ensure component dimensions are within the case's limits.
Whakaahua: Roto view of the JONSBO N6 case, showing the layout for motherboard, CPU, and other components.
Video: Motherboard and CPU Installation Example
Video: This video demonstrates the installation process for a motherboard and CPU in a similar NAS case. Follow these general steps for your JONSBO N6.
4. Pūnaha whakamatao
The JONSBO N6 offers extensive cooling options to maintain optimal system temperatures. It includes two pre-installed 120mm fans for hard drive cooling.
- Mua: Supports 2 x 120mm or 2 x 140mm fans.
- muri: Supports 1 x 120mm fan.
- taha Mauī: Supports 2 x 120mm fans.
- Taha Matau: Supports 2 x 120mm fans.
- Hard Drive Bay: 2 x 120mm fans (built-in).
- Tautoko AIO: Supports 240mm All-In-One liquid coolers.
Image: Diagram illustrating the various fan mounting positions and airflow paths within the JONSBO N6 case for effective cooling.
5. Whakatupato Nui
5.1. Backplane Power Supply Interface
The backplane has 4 power supply interfaces (2 x PATA, 2 x SATA). For standard home-level mechanical hard drives (SATA/SAS), connecting 3 power supplies is typically sufficient as their startup current is around 1A to 2.5A. For enterprise-level hard drives, which have higher startup currents, it is recommended to connect all 4 power interfaces. Always refer to the parameter specifications of your power supply and hard drives; insufficient current may prevent hard drives from starting correctly.
5.2. Backplane Power Supply Line
Only one power interface is allowed to be inserted into the back panel on a single ATX-4Pin or SATA power cable. Do not connect multiple power plugs to the back panel simultaneously using a single power cable.
6. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Rahi Hua (W*D*H) | 305mm x 353mm x 318mm (Includes 6mm tall base) |
| Rauemi | 0.7mm + 1.0mm Steel, Wood |
| Te Whakapiki Kōpae Tika | 9 x 2.5" SSD or 9 x 3.5" HDD |
| Papa Matua Hototahi | ITX / M-ATX |
| Nga Utu Whakanui PCI | 4 mokowhiti |
| Mua I/O | USB 3.2 Gen2 Type-C x1, USB 3.0 x1 (Audio x1 + Mic x1 2-in-1) |
| Tautoko PSU | ATX ≤ 220mm / SFX ≤ 100mm |
| Tautoko CPU Cooler | ≤ 65-160mm (Supports dual power mode) |
| Tautoko GPU | ≤ 275mm-320mm |
| Cooling System Fan Positions | Front 120mm*2 or 140mm*2 / Rear 120mm*1 / Left 120mm*2 / Right 120mm*2 / Hard drive bay 120mm*2 (built-in) |
| Kaiwhakahaere Tere | 3-Port/3-Speed Fan Speed Controller (Standard Specification) |
| Tautoko AIO | 240mm |
| Taumaha Kupenga | 7.5kg |
Image: Detailed dimensions of the JONSBO N6 NAS Case.
7. Pūtāhui me te Tautoko
Mō ngā mōhiohio pūtāhui me te tautoko hangarau, tirohia te paetukutuku mana o Jonsbo webpae, whakapā atu ranei ki to kaihoko. Puritia to riirii hoko mo nga kereme whakamana.
