Autonics TK Rangatū Whakawera Tukutahi me te Whakamao Putanga Putanga PID Manawa Manawa

Mauruuru koe mo te kowhiri i a maatau hua Autonics

Pānuihia me te mohio ki te pukapuka tohutohu me te pukapuka i mua i te whakamahi i te hua. Mo to haumaru, panui me te whai i nga whakaaro haumaru i raro nei i mua i te whakamahi. Mo to haumaru, panuihia me te whai i nga whakaaro kua tuhia ki te pukapuka ako, etahi atu pukapuka me te Autonics webpae. Puritia tenei pukapuka tohutohu ki tetahi waahi ka kitea e koe. Ko nga tohu, nga rahi, me era atu ka huri me te kore panui mo te whakapai ake i nga hua Ka mutu etahi tauira kaore he panui. Whai i a Autonics webpae mo nga korero hou.

Nga korero hua

Ko te Raupapa TK Whakawera Waa me te Whakamao Putanga PIDTemperature Controllers he taputapu e whakamahia ana mo te whakahaere i te pāmahana i roto i nga tono rereke. Ka tae mai me nga ahuatanga kore-haumaru hei whakarite i te haumaru o nga kaiwhakamahi me te aukati i te kino o nga taputapu.

Nga waahanga matua

• Whakawera tukutahi me te putanga whakamatao
• PID mana algorithm mo te mana pāmahana tika
• Ko nga whiringa whakaputa mana rereke kia pai ki nga tono motuhake
• Ka tautoko i nga mahi maha tae atu ki te whakaoho, te whakaputanga tuku, me te korero RS485
• I whakatauhia mo te whakamahi i roto i nga taiao e tutuki ana i nga tikanga kua tohua

Nga Whakaaro Haumaru

I mua i te whakamahi i tenei hua, he mea nui kia whai whakaaro koe ki nga tikanga haumaru e whai ake nei:

1. Whakauruhia he taputapu kore-haumaru i te wa e whakamahi ana i te taputapu me nga miihini ka nui pea te whara kino, te mate ohaoha nui ranei.
2. A ape i te whakamahi i te waeine ki nga waahi ka mura, pahū, hau pirau, nui te makuku, tika te ra, te wera kanapa, te wiri, te paanga, te tote ranei.
3. Tāutahia te waeine ki runga i te paewhiri taputapu hei whakamahi me te karo i te hono, te whakatika, te tirotiro ranei i te waahanga i te wa e hono ana ki te puna hiko.
4. Tirohia nga hononga i mua i te waea me te karo i te wetewete, te whakarereke ranei i te waahanga.

Nga Tohutohu Whakamahi Hua

Whaia enei tohutohu hei whakamahi i te TK Series Simultaneous
Te Whakawera me te Whakamao Putanga Putanga PID Manawa Manawa:

1. Me whakarite kua whakaurua e koe he taputapu kore-haumaru mena kei te whakamahi koe i te taputapu me nga miihini ka nui pea te whara kino, te mate ohaoha nui ranei.
2. Whiriwhiria he waahi pai i roto i te whare e tutuki ana ki nga tikanga taiao kua tohua ki te pukapuka hua.
3. Tāutahia te waeine ki runga i te paewhiri taputapu i mua i te whakamahi.
4. Tirohia nga hononga i mua i te waea me te whakamahi i nga rahinga taura kua tohua i roto i te pukapuka hua. Whakapaia nga kopa kapeka ki nga whakaritenga taipana kua tohua.
5. Whakamahia te kaiwhakahaere i roto i nga tohu kua whakatauhia hei karo i te kino, i te kino ranei.
6. Whakamahia he kakahu maroke hei horoi i te waahanga me te karo i te whakamahi i te wai, i nga whakarewa pararopi ranei ka puta he ahi, he hiko hiko.
7. A ape i te tuku i te hua ki nga maramara whakarewa, te puehu, me te toenga waea ka rere ki roto i te waahanga, ka pakaru, ka ahi ranei.

Nga korero ota

Ko te Raupapa TK Whakawera Waa me te Whakamaotanga Putanga PID Temperature Controllers ka tae mai ki roto i nga tauira rereke me nga whiringa rereke mo te whakauru / whakaputa, te mahi, te tuku hiko, me te whakaputa mana. Mo etahi atu korero me te whiriwhiri i tetahi tauira pai, ka taea e koe te toro ki te Autonics webpae.

Nga Whakaaro Haumaru

• Kia mau ki nga 'Whakaaro Haumaru' mo te mahi haumaru me te tika hei karo i nga aitua.
• Ko te tohu e whakaatu ana i te tupato na runga i nga ahuatanga motuhake ka puta mai nga aitua.

Whakatupato: Ki te kore e whai i nga tohutohu ka puta he whara nui, he mate ranei

1. Me whakauru te taputapu kore-haumaru ina whakamahi i te waeine me nga miihini ka whara kino, ka mate nui ranei te ohanga. taputapu, etc.)
   • Ki te kore e whai i tenei tohutohu ka pa mai pea te whara o te tangata, te mate ohaoha, te ahi ranei.
2. Kaua e whakamahia te waeine ki te waahi kei reira te hau mura, pahū/kino, te haumākū nui, te ra tika, te wera kanapa, te wiri, te paanga, te tote ranei.
   • Ki te kore e whai i tenei tohutohu ka pahū, ka ahi ranei.
3. Tāutahia ki runga i te paewhiri taputapu hei whakamahi.
   • Ki te kore e whai i tenei tohutohu ka puta pea he ru hiko.
4. Kaua e hono, whakatika, tirohia ranei te waeine i te wa e hono ana ki te puna hiko.
   • Ki te kore e whai i tenei tohutohu ka puta he ahi, he ru hiko ranei.
5. Tirohia 'Hononga' i mua i te waea.
   • Ki te kore e whai i tenei tohutohu ka puta he ahi.
6. Kaua e wetewete, whakarereke ranei i te waahanga.
   • Ki te kore e whai i tenei tohutohu ka puta he ahi, he ru hiko ranei.

Tupato: Ki te kore e whai i nga tohutohu ka puta he whara, he kino ranei nga hua.

1. I te wa e hono ana i te whakauru hiko me te putanga rei, whakamahia te taura AWG 20 (0.50 mm2) neke atu ranei, ka whakamauhia te wiri tauranga me te taipana whakakaha o te 0.74 ki te 0.90 N m. I te wa e hono ana i te urunga puoro me te taura whakawhitiwhiti me te kore he taura whakatapua, whakamahia te taura AWG 28 ki te 16 me te whakakoi i te wiri tauranga me te taipana whakakaha o te 0.74 ki te 0.90 N m.
   • Ki te kore e whai i tenei tohutohu ka puta he ahi, he kino ranei na te kore whakapā.
2. Whakamahia te waeine i roto i nga whakaritenga kua tohua.
   • Ki te kore e whai i tenei tohutohu ka pa he ahi, he kino ranei nga hua
3. Whakamahia he kakahu maroke hei horoi i te waahanga, kaua hoki e whakamahi i te wai, i te whakarewa pararopi ranei.
   • Ki te kore e whai i tenei tohutohu ka puta he ahi, he ru hiko ranei.
4. Tiakina te hua mai i te maramara konganuku, te puehu me te toenga waea ka rere ki roto i te waahanga.
   • Ki te kore e whai i tenei tohutohu ka pa he ahi, he kino ranei nga hua.

Whakatupato i te wa e whakamahi ana

• Whaia nga tohutohu i roto i te 'Whakatupato i te wa e Whakamahi ana'. Ki te kore, ka puta he aitua ohorere.
• Tirohia te polarity o nga pito i mua i te waea i te pūoko pāmahana. Mo te pūoko pāmahana RTD, waeahia hei momo waea 3, ma te whakamahi i nga taura rite te matotoru me te roa. Mo te pūoko pāmahana thermocouple (TC), whakamahia te waea utu mo te toronga waea.
• Mawehe atu i te vol teiteitage nga raina hiko ranei hei aukati i te haruru inductive. Mena ka tata te whakauru i te raina hiko me te raina tohu whakauru, whakamahia te tātari raina, varistor ranei i te raina hiko me te waea whakamarumaru ki te raina tohu whakauru. Kaua e whakamahi tata ki nga taputapu e whakaputa ana i te kaha autō, te haruru auau nui ranei.
• Kaua e whakamahia te mana nui ina hono ana ka momotu ranei i nga hononga o te hua.
• Whakanohoia he pana hiko, he ara iahiko ranei ki te waahi ngawari mo te tuku, mo te momotu ranei i te hiko.
• Kaua e whakamahi i te waeine mo etahi atu kaupapa (hei tauira, te iri hiko, te inemita), engari ko te kaiwhakahaere pāmahana.
• A, no te huri i te puoro whakauru, whakawetohia te mana i mua i te huri. Whai muri i te whakarereke i te puoro whakauru, whakarerekehia te uara o te waahanga e rite ana.
• 24 VAC, 24-48 VDC me whakawetohia te tuku hiko me te iti voltage/naianei, Akomanga 2 ranei, taputapu hiko SELV.
• Kaua e inaki te raina korero me te raina hiko. Whakamahia te waea takirua takirua mo te raina korerorero me te hono i nga peepi feritita i ia pito o te raina ki te whakaiti i te awangawanga o waho.
• Mahia he waahi kia huri noa i te waahanga mo te wera o te wera. Mo te mehua tika o te pāmahana, whakawera i te waahanga neke atu i te 20 meneti i muri i te hurihanga o te hiko.
• Kia mahara ki te tuku o te mana voltagtae atu ki te vol kua whakatauriatage i roto i te 2 hēkona i muri i te tohatoha i te mana.
• Kaua e waea ki nga taatai ​​kaore i te whakamahia.
• Ka taea te whakamahi i tenei waahanga ki nga taiao e whai ake nei.
  • I roto i te whare (i roto i te ahuatanga o te taiao i whakatauhia i roto i te 'Tautuhinga')
  • Te teitei Max. 2,000 m
  • Tohu parahanga 2
  • Ko te waahanga whakauru II

Nga korero ota

• He tohutoro noa tenei, kaore te hua tuuturu e tautoko i nga huinga katoa.
• Mo te whiriwhiri i te tauira kua tohua, whai i te Autonics webpae.

1. Rahi
   • N: DIN W 48 × H 24 mm
   • SP: DIN W 48 × H 48 mm (momo mono titi 11)
   • S: DIN W 48 × H 48 mm
   • M: DIN W 72 × H 72 mm
   • W: DIN W 96 × H 48 mm
   • H: DIN W 48 × H 96 mm
   • L: DIN W 96 × H 96 mm
2. Kōwhiringa ki roto/putaputa
   

   Rahi: N
   PN	WAHO2	Mahi
   1	Momo noa 01)	Whakaoho 1 + CT whakauru
   	Te Whakatuturutanga & Te Peeke	Whakaoho 2
   2	Momo noa	Pūoho 1 + Pūoho 2
   D	Momo noa	Pūoho 1 + Tāuru Mamati 1/2
   	Te Whakatuturutanga & Te Peeke	Whakauru Mamati 1/2
   R	Momo noa	Whakaoho 1+Whakawhiti putanga
   	Te Whakatuturutanga & Te Peeke	Putanga tuku
   T	Momo noa	Putanga whakaoho 1 + RS485 whakawhitiwhitinga korero
   	Te Whakatuturutanga & Te Peeke	RS485 korero

   Rahi: SP
   PN	Mahi
   1	Whakaoho 1

   Rahi: S, M, W, H, L
   PN	Mahi
   1	Whakaoho 1
   2	Pūoho 1 + Putanga whakaoho 2
   R	Whakaoho 1 + Putanga tuku
   T	Whakaoho 1 + RS485 korero
   A	Alarm 1 + Alarm 2 + Whakawhiti putanga
   B	Whakaoho 1 + Whakaoho 2 + Whakawhitiwhiti RS485
   D	Pūoho 1 + Pūoho 2 + Tāuru Mamati 1/2 02)

3. Tuku hiko
   • 2: 24 VAC 50/60 Hz, 24-48 VDC
   • 4: 100-240 VAC 50/60 Hz
4. OUT1 Putanga Mana
   • R:  Rerei
   • S: puku SSR
   • C: Putanga puku SSR ka taea te whiriwhiri
5. OUT2 Putanga Mana
   • N: Momo noa
     • [Kao OUT2 (Whakawera, Matao ranei)]
   • R: Te momo whakamahana me te whakamatao
     • [Putanga Rere] 03)
   • C: Te momo whakamahana me te whakamatao
     • [Putanga puku SSR ka taea te whiriwhiri] 04)

Ko te tauira whakauru CI o TK4N ka taea anake te kowhiri i te tauira momo noa me te Alam Putanga 1. (haunga TK4sP)

1. Mo TK4S-D anake, ka whakamahia te tauranga putanga OUT2 hei tauranga whakauru D-2.
2. Ina whakamahana, whakamatao ranei te aratau whakahaere, ka taea te whakamahi OUT2 hei whakaputa whakaoho 3 (haunga TK4N).
3. I te wa e whakamahana, whakamatao ranei te aratau whakahaere, ka taea te whakamahi OUT2 hei whakaputanga tuku 2.

ā-ringa

• Mo te whakamahi tika i te hua, tirohia nga pukapuka pukapuka me te whai i nga whakaaro haumaru kei roto i nga pukapuka.
• Tangohia nga pukapuka mai i te Autonics webpae.

Pūmanawa

• Tikiake i te tāutanga file me nga pukapuka a te Autonics webpae.

DAQMaster

• Ko te DAQMaster he kaupapa whakahaere taputapu matawhānui. Kei te waatea mo te tautuhinga tawhā, te aroturuki.

Kua hokona motuhake

• 11 turanga titi: PG-11, PS-11 (N)
• Kaihuri o nāianei (CT)
• uhi whakamarumaru kāpeka: RSA / RMA / RHA / RLA Uwhi
• Kaitahuri whakawhitiwhiti: Raupapa SCM

Whakatakotoranga

Rangatū		TK4N	TK4SP	TK4S	TK4M
Mana tuku	Momo AC	100 – 240 VAC 50/60 Hz ±10%
	Momo AC/DC	–	24 VAC 50/60 Hz ±10%, 24-48 VDC ±10%
Mana kohi	Momo AC	≤ 6 VA	≤ 8 VA
	Momo AC/DC	–	AC: ≤ 8 VA, DC ≤ 5W
Waeine taumaha (whakapakia)		≈ 70 g (≈ 140 g)	≈ 85 g (≈ 130 g)	≈ 105 g (≈ 150 g)	≈ 140 g (≈ 210 g)

 

Rangatū		TK4W	TK4H	TK4L
Mana tuku	Momo AC	100 – 240 VAC 50/60 Hz ±10%
	Momo AC/DC	24 VAC 50/60 Hz ±10%, 24-48 VDC ±10%
Mana kohi	Momo AC	≤ 8 VA
	Momo AC/DC	AC: ≤ 8 VA, DC ≤ 5W
Waeine taumaha (whakapakia)		≈ 141 g (≈ 211 g)	≈ 141 g (≈ 211 g)	≈ 198 g (≈ 294 g)

 

Sampling wā		50 ms
Te whakatakotoranga whakauru		Tirohia 'Momo Whakauru me te Awhe Whakamahi'
Kōwhiringa whakauru	Whakauru CT	0.0-50.0 A (awhe inenga tuatahi o naianei) CT ōwehenga: 1/1,000 Tikanga ine: ±5% FS ±1mati
	Te urunga mamati	Whakapā – ON: ≤ 2 kΩ, OFF: ≥ 90 kΩ Kore whakapā – toenga voltage ≤ 1.0 V, nāianei turuturu ≤ 0.1 mA Te rere o naianei: ≈ 0.5 mA mo ia whakauru
Whakahaere putanga	Rerei	250 VAC 3 A, 30 VDC 3 A 1a
	SSR	11 VDC±2 V, ≤ 20 mA
	o nāianei	DC 4-20 mA, DC 0-20 mA ranei (tawhā), Te aukati Uta: ≤ 500 Ω
Whakaoho putanga	Rerei	AL1, AL2: 250 VAC 3 A 1a TK4N AL2: 250 VAC 0.5 A 1a (≤ 125 VA)
Kōwhiringa putanga	Tukunga	DC 4 – 20 mA (Atete uta: ≤ 500 Ω, Putanga Putanga: ±0.3% FS)
	RS485 comm.	Modbus RTU
Whakaatu momo		7 waahanga (whero, matomato, kowhai), momo LED
Whakahaere momo	Te whakamahana, te whakamahana	ON/OFF, P, PI, PD, Mana PID
	Whakawera & Te whakamatao
Hysteresis		Thermocouple, RTD: 1 ki te 100 (0.1 ki te 100.0) ℃/℉ Anarite: 1 ki te 100 mati
Tauritenga roopu (P)		0.1 ki te 999.9 ℃/℉ (0.1 ki te 999.9%)
Tautoko wā (I)		0 ki te 9,999 hēkona
Putanga wā (D)		0 ki te 9,999 hēkona
Whakahaere huringa (T)		Putanga Relay, Putanga puku SSR: 0.1 ki te 120.0 hekona Putanga puku SSR o naianei ka taea te whiriwhiri: 1.0 ki te 120.0 hekona
ā-ringa tautuhi		0.0 ki te 100.0%
Rerei ora huringa	Hangaia	OUT1/2: ≥ 5,000,000 mahi AL1/2: ≥ 20,000,000 mahi (TK4H/W/L: ≥ 5,000,000 mahi)
	Hiko	≥ 100,000 mahi
Dielectric kaha		I waenganui i te tauranga puna hiko me te tauranga whakauru: 2,000 VAC 50/60 Hz mo te 1 min
Wiri		0.75 mm amprama i te auau o te 5 ki te 55 Hz (mo te 1 meneti) i ia ahunga X, Y, Z mo te 2 haora
Wewete ātete		≥ 100 MΩ (500 VDC meger)
Haruru mate mate		±2 kV haruru ahua tapawha ma te haruru simulator (whanui puihi: 1 ㎲) Wā-R, Wāhanga-S
Maharahara pupuri		≈ 10 tau (momo mahara semiconductor kore-kore)
Ambient pāmahana		-10 ki te 50 ℃, te rokiroki: -20 ki te 60 ℃ (kaore he mīti, he hauhautanga)
Ambient haumākū		35 ki te 85%RH, te rokiroki: 35 ki te 85%RH (kaore he mīti, he whakawera ranei)
Parenga hanganga		IP65 (Rohe o mua, nga paerewa IEC) • TK4SP: IP50 (Rohe o mua, nga paerewa IEC)
Wewete momo		Ko te whakamaarama rua, te whakakaha ranei i te whakamaarama (tohu: , te kaha dielectric i waenga i te waahanga whakauru ine me te waahanga hiko: 2 kV)
Apiti		Taiapa, uhi whakamaru kapeka (TK4N)
Whakaaetanga

Atanga Whakawhitiwhiti

RS485

Comm. kawa	Modbus RTU
Hononga momo	RS485
Taupānga paerewa	EIA RS485 hanganga ture ki
Mōrahi hononga	31 waeine (wahitau: 01 ki te 99)
Tukutahi tikanga	Tukutahi
Ko Comm. Tikanga	E rua-waea haurua taarua
Ko Comm. whai hua awhe	≤ 800 m
Comm. tere	2,400 / 4,800 / 9,600 (taunoa) / 19,200 / 38,400 bps (tawhā)
Whakautu wā	5 ki te 99 ms (taunoa: 20 ms)
Tīmata moka	1 moka (kua mau)
Raraunga moka	8 moka (kua mau)
Parity moka	Kore (taunoa), Panakore, Ahakoa
Kati moka	1 bit, 2 bit (taunoa)
EEPROM ora huringa	≈ 1,000,000 mahi (Muku / Tuhia)

Momo Whakauru me te Awhe Whakamahi

He iti te awhe tautuhinga o etahi tawhā ina whakamahi i te whakaaturanga ira ira.

Whakauru momo		ā-ira tohu	Whakaatu	Te whakamahi awhe (℃)			Te whakamahi awhe (℉)
Thermo -rua	K (CA)	1	KCaH	-200	ki	1,350	-328	ki	2,463
		0.1	KCaL	-199.9	ki	999.9	-199.9	ki	999.9
	J (IC)	1	JIch	-200	ki	800	-328	ki	1,472
		0.1	JIcL	-199.9	ki	800.0	-199.9	ki	999.9
	E (CR)	1	ECrH	-200	ki	800	-328	ki	1,472
		0.1	ECrL	-199.9	ki	800.0	-199.9	ki	999.9
	T (CC)	1	TCcH	-200	ki	400	-328	ki	752
		0.1	TCcL	-199.9	ki	400.0	-199.9	ki	752.0
	B (PR)	1	B PR	0	ki	1,800	32	ki	3,272
	R (PR)	1	R PR	0	ki	1,750	32	ki	3,182
	S (PR)	1	S PR	0	ki	1,750	32	ki	3,182
	N (NN)	1	N NN	-200	ki	1,300	-328	ki	2,372
	C (TT) 01)	1	C TT	0	ki	2,300	32	ki	4,172
	G (TT) 02)	1	G TT	0	ki	2,300	32	ki	4,172
	L (IC)	1	LIH	-200	ki	900	-328	ki	1,652
		0.1	LIcL	-199.9	ki	900.0	-199.9	ki	999.9
	U (CC)	1	UCch	-200	ki	400	-328	ki	752
		0.1	UCcL	-199.9	ki	400.0	-199.9	ki	752.0
	Platinera II	1	PLII	0	ki	1,390	32	ki	2,534
RTD	Cu50 Ω	0.1	ME 5	-199.9	ki	200.0	-199.9	ki	392.0
	Cu100 Ω	0.1	CU10	-199.9	ki	200.0	-199.9	ki	392.0
	JPt100 Ω	1	JPtH	-200	ki	650	-328	ki	1,202
		0.1	JPtL	-199.9	ki	650.0	-199.9	ki	999.9
	DPt50 Ω	0.1	DPT5	-199.9	ki	600.0	-199.9	ki	999.9
	DPt100 Ω	1	DPtH	-200	ki	650	-328	ki	1,202
		0.1	DPtL	-199.9	ki	650.0	-199.9	ki	999.9
	Nickel120 Ω	1	NI12	-80	ki	200	-112	ki	392
Tauritenga	0 ki te 10 V	–	AV1			0 ki	10 V
	0 ki te 5 V	–	AV2			0 ki	5 V
	1 ki te 5 V	–	AV3			1 ki	5 V
	0 ki te 100 mV	–	AMV1			0 ki	100 mV
	0 ki te 20 mA	–	AMA1			0 ki	20 mA
	4 ki te 20 mA	–	AMA2			4 ki	20 mA

1. C (TT): He rite tonu ki te pukoro momo W5 (TT) o naianei
2. G (TT): He rite ki te pukoro momo W (TT) o naianei

• Te ātete raina e whakaaetia ana mo ia raina: ≤ 5 Ω

Whakaatu tika

Whakauru momo	Te whakamahi pāmahana	Whakaatu tika
Thermo -rua RTD	I te pāmahana rūma (23℃ ±5 ℃)	(PV ±0.3%, ±1 ℃ teitei ake ranei) ±1-mati • Thermocouple K, J, T, N, E i raro -100 ℃ me L, U, PLII, RTD Cu50 Ω, DPt50 Ω: (PV ±0.3% ranei ±2 ℃ teitei ake) ±1-mati • Thermocouple C, G me R, S i raro i te 200 ℃: (PV ±0.3%, ±3 ℃ teitei ake ranei) ±1-mati • Thermocouple B i raro i te 400 ℃: Karekau he paerewa tika
	Kei waho o te awhe o te rūma	(PV ±0.5%, ±2 ℃ teitei ake ranei) ±1-mati • RTD Cu50 Ω, DPt50 Ω: (PV ±0.5% ranei ±3 ℃ teitei ake) ±1-mati • Thermocouple R, S, B, C, G: (PV ±0.5%, ±5 ℃ teitei ake ranei) ±1-mati • Ētahi atu pūoko: ≤ ±5 ℃ (≤-100 ℃)
Tauritenga	I te pāmahana rūma (23℃ ±5 ℃)	±0.3% FS ±1-mati
	Kei waho o te awhe o te rūma	±0.5% FS ±1-mati

• Ki te TK4SP Series, ±1 ℃ ka taapirihia ki te paerewa tohu.

Whakaahuatanga Waeine

1. Wāhanga whakaatu PV (Whero)
   • Aratau Whakahaere: Whakaatu PV (Uara o naianei).
   • Aratau tautuhinga: Whakaatu ingoa tawhā.
2. Wāhanga whakaatu SV (Kakariki)
   • Aratau Whakahaere: Whakaatu SV (Tautuhinga uara).
   • Aratau tautuhinga: He whakaatu uara tautuhinga tawhā.
3. Kī tāuru
   

   Whakaatu	Ingoa
   [A/M]	Whakahaere kī whakawhiti
   [MODE]	Kī aratau
   [◀], [▼], [▲]	Te tautuhi i te kī mana uara

4. Tohutohu
   

   Whakaatu	Ingoa	Whakaahuatanga
   ℃, %, ℉	Waeine	Ka whakaatu i te waeine kua tohua (tawhā)
   AT	Whakataki aunoa	Ka uira i te wa o te whakatangi aunoa ia 1 hekona
   WAwaho1/2	Putanga whakahaere	Ka ON ina ON te putanga mana Putanga SSR (whakahaere huringa/waahanga) MV neke atu i te 5% ON Putanga o naianei Mana a-ringa: 0% OFF, over ON Whakahaere aunoa: i raro i te 2% OFF, neke atu i te 3% ON
   AL1/2	Putanga whakaoho	Ka ON ina ON te putanga whakaoho
   TAATA	Te whakahaere a-ringa	Ka ON i te waa whakahaere a-ringa
   SV1/2/3	Maha SV	Kei te ON te tohu SV e whakaatuhia ana i tenei wa. (I te wa e whakamahi ana i te mahi SV maha)

   

5. Tauranga kawenga PC: Mo te hono kaitahuri korero (raupapa SCM).

• Mo nga korero mo te tauira tawhito, tirohia te pukapuka kaiwhakamahi. Tangohia nga pukapuka mai i te Autonics webpae.

Ahu

• Waeine: mm, Mo nga whakaahua taipitopito, whai i te Autonics webpae.
• Kei raro nei i runga i te TK4S Series.

Ka tapahia te Ranga

Taiapa

TK4N /TK4S/SP /Etahi atu raupapa

Ko te uhi whakamarumaru kapeka

TK4N

Tikanga Tāuta

TK4N

• Whai muri i te whakapuru i te hua ki te panui me te awhi, whakamauhia nga tutaki ma te whakamahi i te huriwiri.

Ētahi atu raupapa

• Whakauruhia te waeine ki roto i te röpü, whakamauhia te taiapa ma te pana ki te huriwiri papatahi.

Nga hapa

Whakaatu	Whakauru	Whakaahuatanga	Putanga	Raparongoā
	Pūoko pāmahana	Ka uira i te 0.5 hekona te wa ka momotuhia te pūoko tāuru, kāore rānei te pūoko e hono.	'Hapa pūoko, MV' uara tautuhinga tawhā	Tirohia te mana whakauru whakaurunga.
TUwhera
	Tauritenga	Ka uira i te 0.5 hekona te wa kua eke te whakaurunga ki te FS ±10%.	'Hapa pūoko, Tawhā MV' te whakarite uara	Tirohia te mana whakauru tairitenga.
	Pūoko pāmahana	Ka uira i te 0.5 hekona te wa mena kei runga ake te uara whakauru i te awhe whakauru.	Whakawera: 0%, Matao: 100%
HHHH
	Tauritenga	Ka uira i te 0.5 hekona te wa ki te te Ko te uara whakauru kei runga i te 5 ki te 10% o te teitei uara rohe iti ranei.	Putanga noa	Ka uru ana te whakauru ki roto i te awhe whakauru whakauru, ka ngaro tenei whakaaturanga.
	Pūoko pāmahana	Ka uira i te 0.5 hēkona. wā ki te kei raro te uara tāuru i te awhe tāuru.	Whakawera: 100%, Matao: 0%
Llll
	Tauritenga	Ka uira i te 0.5 hekona te wa ki te te Ko te uara whakauru kei runga i te 5 ki te 10% o te iti uara rohe teitei ranei.	Putanga noa
ERR	Pūoko pāmahana	Ka uira i te 0.5 hekona te waahi mena he hapa mo te tautuhi ka hoki ki te hapa-i mua i te mata.	–	Takina tikanga tautuhinga.
	Tauritenga

Hononga

• He tauira paerewa nga pito marumaru.
• Ko te whakauru mamati kaore i te whakamaarama hiko mai i nga iahiko o roto, no reira me whakamaarama i te wa e hono ana i etahi atu iahiko.

TK4N

TK4S

TK4SP

TK4M

TK4H / W / L

Whakatakotoranga Crimp Terminal

• Waeine: mm, Whakamahia te tauranga crimp o te ahua whai.

Whakaaturanga Tuatahi Ina KIA te Hiko

• Ina tukuna te hiko, i muri i nga whakaaturanga katoa ka whiti mo te 1 hekona, ka whakaatuhia te ingoa tauira. I muri i te momo pūoko whakauru ka whiti rua, uru ki te aratau RUN.

	1. Katoa whakaatu	2. Tauira	3. Whakauru whakaritenga	4. Rere aratau
PV whakaatu wahanga	***8	TK4	TK4	TUwhera
Ko te waahanga whakaatu SV	***8	14RN	KCaH	0

Tautuhinga Aratau

Tautuhinga Tawhā

• Ko etahi tawhā ka whakahohe/whakawetohia i runga i te tauira, te whakatakotoranga ranei o etahi atu tawhā.
• Ko te āhuatanga 'Parameter mask', e huna ana i nga tawhā horekau, hohekore ranei, me te āhuatanga 'User parameter group', he tere me te ngawari ki te whakarite i etahi tawhā e whakamahia ana i nga wa katoa, ka taea te whakarite ki DAQMaster.
• Tirohia te pukapuka kaiwhakamahi mo nga taipitopito.

Parameter 1 roopu

Tawhā	Whakaatu	Taunoa
Putanga whakahaere RUN / TUTU	RS	RERE
Kōwhiringa SV maha	SV-N	EN-0
Whakawera te ia te aroturuki	CT-A	)0
Putanga whakaoho1 tepe iti	AL!L	1550
Putanga whakaoho1 tepe teitei	AL!H	1550
Putanga whakaoho2 tepe iti	AL@L	1550
Putanga whakaoho2 tepe teitei	AL@H	1550
Putanga whakaoho3 tepe iti	AL#L	1550
Putanga whakaoho3 tepe teitei	AL#H	1550
SV maha 0	EN-0	0000
SV maha 1	EN-1	0000
SV maha 2	EN-2	0000
SV maha 3	EN-3	0000

Parameter 2 roopu

Tawhā	Whakaatu	Taunoa
Whakaritea Aunoa RUN/STOP	AT	WATE
Whakaweratanga orite roopu	HP	01)0
Peehe riterite te whakamatao	CP	01)0
Te whakamahana i te waa whakauru	H-1	0000
Te wa tino whakamatao	C-1	0000
Te wa whakamahana	HD	0000
Te wa whakamahana	CD	0000
Peehe inaki mate	DB	0000
Tautuhi ā-ringa	WHAKATANGA	05)0
Te whakawera whakawera	hHYS	002
Wewete whakawera	HOST	000
Te whakamatao histeresis	KHI	002
Wehe wetewete	Utu	000
MV tepe iti	L-MV	`0)0
MV tepe teitei	H-MV	10)0
RAMP piki te reiti huringa	RAMU	000
RAMP tere huringa heke	RAMD	000
RAMP wae wa	RUNT	MIN

Parameter 3 roopu

Tawhā	Whakaatu	Taunoa
Te whakatakotoranga whakauru	IN-T	KCaH
Waeine pāmahana	UNIT	?C
Tepe iti tairitenga	L-RG	0)00
Tepe teitei tairitenga	H-RG	1)00
Tauine ira ira	Ira	)0
Tauine rohe iti	L-SC	00)0
Tauine rohe teitei	H-SC	10)0
Waeine whakaatu	DUNT	?/O
Te whakatikatika whakauru	IN-B	0000
Tāuru tātari matihiko	MAvF	00)1
SV rohe iti	L-SV	-200
SV rohe teitei	H-SV	1350
Whakahaere aratau whakaputa	O-FT	TE wera (Momo noa)
		HC (Momo whakawera me te whakamatao)
Momo whakahaere	C-MD	PID (Pānoa           momo)
		pP (Whakawera me te Matao- momo)
Aratau whakatika aunoa	AtT	TUN1
OUT1 mana whakaputa whiriwhiringa	WAHO1	CURR
Putanga puku SSR OUT1 momo	O!SR	STND
OUT1 putanga o nāianei awhe	O!MA	4-20
OUT2 mana whiriwhiri putanga	WAHO2	CURR
OUT2 awhe putanga onāianei	O@MA	4-20
huringa mana whakawera	HT	02)0 (Rere) 00@0 (SSR)
huringa mana whakamatao	CT

Parameter 4 roopu

Tawhā	Whakaatu	Taunoa
Putanga whakaoho1 Mahi aratau	AL-1	DVCC
Putanga whakaoho1 Kōwhiringa	AL!T	AL-A
Putanga whakaoho1 Hysteresis	A!HY	001
Putanga whakaoho1 whakapā momo	A!N	NO
Putanga whakaoho1 ON roa wā	A!ON	0000
Putanga whakaoho1 OFF roa wā	A!O	0000
Putanga whakaoho2 Aratau Mahi	AL-2	]]DV
Putanga whakaoho2 Kōwhiringa	AL@T	AL-A
Putanga whakaoho2 Hysteresis	A@HY	001
Putanga whakaoho2 momo whakapā	A@N	NO
Putanga whakaoho2 ON te wa roa	A@ON	0000
Putanga whakaoho2 OFF te wa roa	A@OF	0000
Putanga whakaoho3 Aratau Mahi	AL-3	WATE
Putanga whakaoho3 Kōwhiringa	AL#T	AL-A
Putanga whakaoho3 Hysteresis	A#HY	001
Putanga whakaoho3 momo whakapā	A#N	NO
Putanga whakaoho3 ON te wa roa	A#ON	0000
Putanga whakaoho3 OFF te wa roa	A#OF	0000
te wa LBA	LBaT	0000
roopu LBA	LBaB	002 (003)
Whakawhiti Analog putanga1 Aratau	AoM1	PV
Putanga tuku1 rohe iti	FsL1	-200
Putanga tuku1 rohe teitei	FsH1	1350
Huaputa Whakawhiti Analog2 Aratau	AoM2	PV
Putanga tuku2 tepe iti	FsL2	-200
Putanga tuku2 tepe teitei	FsH2	1350
Wāhitau kōrero	ADRS	01
Te tere korero	BPS	96
Ko Comm. bit parity	PRTY	KORE
Ko Comm. mutu bit	STP	2
Te wa whakautu	RSWT	20
Ko Comm. tuhi	NGARU	EnA

Parameter 5 roopu

WHAKAPAPA

• 18, Bansong-ro 513Beon-gil, Haeundae-gu, Busan, Republic of Korea, 48002
• www.autonics.com
• +82-2-2048-1577
• sales@autonics.com

Tuhinga / Rauemi

Autonics TK Rangatū Whakawera Tukutahi me te Whakamao Putanga Putanga PID Manawa Manawa [pdf] Pukapuka Tohutohu Raupapa TK, Raupapa TK Whakawera Watahi me te Whakamaotanga PID Te Whakamahana i te Waahanga, Te Whakamahana me te Whakaaetanga Whakawera PID Putanga Manawa, Te Whakamahana me te Whakamaoho PID Putanga Putanga, Nga Kaipupuri PID Putanga, Nga Kaitohu PID, Nga Kaitohu PID

Tohutoro

• Pukapuka Kaiwhakamahi