Beijer Electronics GT-1238 Kōwae Whakauru Mamati
Copyright © 2025 Beijer Electronics AB. All rights reserved. The information in this document is subject to change without notice and is provided as available at the time of printing. Beijer Electronics AB reserves the right to change any information without updating this publication. Beijer Electronics AB assumes no responsibility for any errors that may appear in this document. All examples in this document are only intended to improve understanding of the functionality and handling of the equipment. Beijer Electronics AB cannot assume any liability if these exampE whakamahia ana i roto i nga tono tuuturu. I roto view o te whānuitanga o nga tono mo tenei rorohiko, me whiwhi nga kaiwhakamahi i te matauranga kia tika ai te whakamahi i roto i a raatau tono motuhake. Ko nga tangata whai mana mo te tono me nga taputapu me whakarite kia tutuki ia tono ki nga whakaritenga katoa, paerewa me nga ture e pa ana ki te whirihoranga me te haumaru. Karekau a Beijer Electronics AB e whakaae mo nga kino i puta i te wa e whakauruhia ana, e whakamahi ana ranei i nga taputapu kua whakahuahia i roto i tenei tuhinga. Ka whakakorehia e Beijer Electronics AB nga whakarereketanga katoa, whakarereke, hurihanga ranei o nga taputapu.
Te Tari Matua
- Beijer Electronics AB
- Pouaka 426
- 201 24 Malmö, Huitene
- www.beijerelectronics.com
- +46 40 358600
Mo tenei pukapuka
Kei roto i tenei pukapuka nga korero mo nga ahuatanga rorohiko me nga taputapu o te Beijer Electronics GT-1238 Digital Input Module. E whakarato ana i nga korero hohonu, te aratohu mo te whakaurunga, te tatūnga, me te whakamahinga o te hua.
Nga Tohu i Whakamahia i roto i tenei pukapuka
This publication includes Warnings, Cautions, Notes, and important icons where appropriate to point out safety-related or other important information. The corresponding symbols should be interpreted asfollows:
WHAKATOKANGA
Ko te ata Whakatupato e tohu ana i tetahi ahuatanga morearea pea, ki te kore e karohia, ka mate, ka whara kino ranei, me te kino nui ki te hua.
WHAKATAHI
Ko te ata Whakatupato e tohu ana i tetahi ahuatanga morearea, ki te kore e karohia, ka pa mai he whara iti, iti ranei, me te kino o te hua.
FAKATOKANGA
Ko te tohu Panui he matohi i te kaipanui ki nga meka me nga tikanga e tika ana.
NUI
Ko te tohu Hiranga e whakaatu ana i nga korero whakahirahira.
Haumaru
I mua i te whakamahi i tenei hua, panuihia tenei pukapuka me etahi atu pukapuka e tika ana. Kia tupato ki nga tohutohu haumaru! Karekau he take ka riro ma Beijer Electronics te haangai mo nga pakaru i puta mai i te whakamahinga o tenei hua. Ko nga whakaahua, exampKo nga tuhinga me nga hoahoa kei roto i tenei pukapuka kua whakauruhia hei kaupapa whakamaarama. Na te maha o nga taurangi me nga whakaritenga e pa ana ki tetahi whakaurunga, kaore e taea e Beijer Electronics te kawe kawenga, te kawenga ranei mo te whakamahi pono i runga i te tawhito.amples me nga hoahoa.
Tiwhikete Hua
Kei te hua nga tiwhikete hua e whai ake nei.
Nga Whakaritenga mo te Haumaru Whanui
WHAKATOKANGA
- Kaua e whakaemihia nga hua me nga waea me te hiko e hono ana ki te punaha. Ma te mahi pera ka puta he "arc flash", ka puta mai he huihuinga kino ohorere (te wera, te ahi, nga mea rere, te pehanga pupuhi, te pupuhi oro, te wera).
- Kaua e pa ki nga poraka kapeka, ki nga waahanga IO ranei i te wa e rere ana te punaha. Ma te mahi pera ka raru te hiko, te ara iahiko poto, te kino ranei o te taputapu.
- Kaua rawa e tukua nga mea konganuku o waho kia pa ki te hua i te wa e rere ana te punaha. Ma te mahi pera ka raru te hiko, te ara iahiko poto, te kino ranei o te taputapu.
- Kaua e waiho te hua ki te taha o nga mea e mura ana. Ma te mahi pera ka puta he ahi.
- Ko nga mahi waea waea katoa me mahi e tetahi miihini hiko.
- I te wa e whakahaere ana i nga waahanga, me whakarite kia noho pai nga tangata katoa, te waahi mahi me te taake. A ape i te pa ki nga waahanga whakahaere, kei roto i nga waahanga nga waahanga hiko ka ngaro pea i te tuku hiko.
WHAKATAHI
- Kaua rawa e whakamahia te hua i roto i nga taiao me te pāmahana neke atu i te 60 ℃. A ape i te whakatakoto i te hua ki te ra tika.
- Kaua rawa e whakamahia te hua i roto i nga taiao neke atu i te 90% haumākū.
- Whakamahia i nga wa katoa te hua ki nga taiao whai tohu parahanga 1, 2 ranei.
- Whakamahia nga taura paerewa mo te waea.
Mō te Pūnaha raupapa-G
Ka mutu te punahaview
- Kōwae Whāurutau Whatunga – Ko te kōwae whāurutau whatunga te hono i waenga i te pahi mara me nga taputapu mara me nga waahanga whakaroa. Ko te hononga ki nga punaha pahi mara rereke ka taea te whakarite e ia o nga waahanga urutau whatunga e tika ana, hei tauira, mo te MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc.
- Kōwae Roha - Momo kōwae whakawhānui: IO Mamati, IO Analog, me nga waahanga Motuhake.
- Messaging – The system uses two types of messaging: Service messaging and IO messaging. About the G-series System Beijer
IO Tukatuka Raraunga Mahere
E toru nga momo raraunga o te kōwae roha: raraunga IO, tawhā whirihoranga, me te rehita mahara. Ko te whakawhiti raraunga i waenga i te urutau whatunga me nga waahanga roha ka mahia ma te IO tukanga whakaahua raraunga ma te kawa o roto.
Data flow between the network adapter (63 slots) and expansion modules The input and output image data depend on the slot position and the data type of the expansion slot. The ordering of input and output process image data is based on the expansion slot position. Calculations for this arrangement are included in the manuals for the network adapter and programmable IO modules. Valid parameter data depends on the modules in use. For example, analogue modules have settings of either 0-20 mA or 4-20 mA, and temperature modules have settings such as PT100, PT200, and PT500. The documentation for each module provides a description of the parameter data.
Whakatakotoranga
Whakatakotoranga Taiao
- Te pāmahana whakahaere -20°C – 60°C
- UL temperature -20°C – 60°C
- Te pāmahana rokiroki -40°C – 85°C
- Relative humidity 5% – 90% non-condensing
- Whakanuia te reera DIN
- Shock operating IEC 60068-2-27 (15G)
- Vibration resistance IEC 60068-2-6 (4 g)
- Industrial emissions EN 61000-6-4: 2019
- Industrial immunity EN 61000-6-2: 2019
- Installation position Vertical and horizontal
- Product certifications CE, FCC, UL, cUL
Whakatakotoranga Whānui
- Power dissipation Max. 35 mA @ 5 VDC
- Isolation I/O to logic: Photocoupler isolation
- Field power Supply voltage: 24 VDC ingoa
- Voltage awhe: 15 – 30 VDC
- Te tohanga mana: 0 mA @ 24 VDC
- Wiring I/O cable max. 2.0 mm² (AWG 14)
- Torque 0.8 Nm (7 lb-in)
- Taumaha 59 g
- Module size 12 mm x 99 mm x 70 mm
Ahu
Whakatakotoranga Whakauru
| Whakauru mo ia kōwae | 8 points universal type |
| Tohutohu | 8 te mana whakauru matomato |
| On-state voltage | 24 VDC ingoa
15 – 26.4 VDC @ 70 ℃ 15 – 28.8 VDC @ 60 ℃ |
| I runga i te ahua o naianei | 4 mA @ 24 VDC
5 mA @ 30 VDC |
| Off-state voltage | 12.5 VDC @ 25 ℃ |
| Te whakaroa tohu whakauru | OFF ki ON: Max. 0.3 ms
ON ki OFF: Max. 0.3 ms |
| tātari tāuru | Ka taea te whakarite, tae atu ki te 10 ms |
| Impedance tāuru ingoa | 5.4K Ω angamaheni |
| Momo noa | 8 piro / 2 COM (ao) |
Hoahoa Waea
| Pin no. | Whakaahuatanga tohu |
| 0 | Huarere whakauru 0 |
| 1 | Huarere whakauru 1 |
| 2 | Huarere whakauru 2 |
| 3 | Huarere whakauru 3 |
| 4 | Huarere whakauru 4 |
| 5 | Huarere whakauru 5 |
| 6 | Huarere whakauru 6 |
| 7 | Huarere whakauru 7 |
| 8 | He mea noa (totohu oper. 0 V / puna oper. 24 V) |
| 9 | He mea noa (totohu oper. 0 V / puna oper. 24 V) |
Tohu LED
| LED no. | Mahi / whakaahuatanga LED | tae arahina |
| 0 | INPUT hongere 0 | Kakariki |
| 1 | INPUT hongere 1 | Kakariki |
| 2 | INPUT hongere 2 | Kakariki |
| 3 | INPUT hongere 3 | Kakariki |
| 4 | INPUT hongere 4 | Kakariki |
| 5 | INPUT hongere 5 | Kakariki |
| 6 | INPUT hongere 6 | Kakariki |
| 7 | INPUT hongere 7 | Kakariki |
Tūnga Hongere LED
| Tūnga | LED | Tohutohu |
| Kaore he tohu | Wehe | Mahi noa |
| I runga tohu | Kakariki | Mahi noa |
Mahere Raraunga ki te Ripanga Atahanga
Whakauruhia nga raraunga kōwae
| D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
Uara whakapakoko tāuru
| Bit no. | Moka 7 | Moka 6 | Moka 5 | Moka 4 | Moka 3 | Moka 2 | Moka 1 | Moka 0 |
| Paita 0 | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
Raraunga Tawhā
Te roa tawhā tika: 2 paita
| Bit no. | Moka 7 | Moka 6 | Moka 5 | Moka 4 | Moka 3 | Moka 2 | Moka 1 | Moka 0 |
| Paita 0 | Uara tātari tāuru: 0 – 10 (wae: ms) | |||||||
| Paita 1 | Kua rahuitia | |||||||
Tatūnga Pūmārō
WHAKATAHI
- I nga wa katoa panuihia tenei upoko i mua i te whakauru i te waahanga!
- Mata wera! Ka wera te mata o te whare i te wa e mahi ana. Mēnā ka whakamahia te taputapu i roto i te pāmahana teitei, me whakamatao te taputapu i mua i te pa ki a ia.
- Ko te mahi i runga i nga taputapu kaha ka pakaru nga taputapu! Whakawetohia te hiko hiko i mua i te mahi i runga i te taputapu.
Nga Whakaritenga Mokowā
The following drawings show the space requirements when installing the G-series modules. The spacing creates space for ventilation and prevents conducted electromagnetic interference from influencing the operation. Installation position is valid vertical and horizontally. The drawings are illustrative and may be out of proportion.
WHAKATAHI
KORE e whai i nga whakaritenga mokowhiti ka hua pea te kino o te hua.
Maunga Kōwae ki DIN Rail
Ko nga upoko e whai ake nei e whakaatu ana me pehea te whakairi i te waahanga ki te reera DIN.
WHAKATAHI
Me whakatika te kōwae ki te rail DIN me nga raka maukati.
Maunga GL-9XXX, GT-XXXX Module ranei
Ko nga tohutohu e whai ake nei ka pa ki enei momo waahanga:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Ko nga waahanga GN-9XXX e toru nga raka maukati, kotahi kei raro, e rua ki te taha. Mo nga tohutohu whakapuru, tirohia te Maunga GN-9XXX Module.
Maunga GN-9XXX Kōwae
Ki te whakairi, ki te whakaheke ranei i te urutau whatunga, i te kōwae IO ka taea te hōtaka me te ingoa hua GN-9XXX, mo muaample GN-9251, GN-9371 ranei, tirohia nga tohutohu e whai ake nei:
Maunga Poraka Kapeka Tangohia
Ki te whakairi, ki te whakaheke ranei i tetahi paraka ka taea te tango (RTB), tirohia nga tohutohu kei raro nei.
Honoa nga Tauera ki te Poraka Kapeka Tango
Hei hono/motuhia nga taura ki/mai i te paraka kapeka tango (RTB), tirohia nga tohutohu kei raro nei.
WHAKATOKANGA
Whakamahia i nga wa katoa te tuku voltage me te auau ki te aukati i te kino o nga taputapu me te whakarite i te mahi tino pai.
Te Mana Mara me nga Pins Raraunga
Communication between the G-series network adapter and the expansion module, as well as system/field power supply of the bus modules is carried out via the internal bus. It is comprised of 2 Field Power Pins and 6 Data Pins.
WHAKATOKANGA
Kaua e pa ki nga raraunga me nga titi hiko mara! Ko te pa ka pa ki te paru me te pakaru i te haruru ESD.
| Pin no. | Ingoa | Whakaahuatanga |
| P1 | Pūnaha VCC | Pūnaha tuku voltage (5 VDC) |
| P2 | Pūnaha GND | Te whenua o te punaha |
| P3 | Putanga tohu | Tauranga putanga tohu o te kōwae pūtukatuka |
| P4 | Putanga rangatū | Tauranga putanga tuku o te kōwae pūtukatuka |
| P5 | Whakauru rangatū | Tauranga urunga kaiwhiwhi o te kōwae pūtukatuka |
| P6 | Kua rahuitia | Kua rahuitia mo te tohu whakawhiti |
| P7 | Pae GND | Papa whenua |
| P8 | VCC mara | Tuku mara voltage (24 VDC) |
FAQ
- Q: Me aha ahau mena ka whakaatuhia e nga tohu LED nga tauira rereke?
- A: If the LED indicators display unusual patterns, check the wiring connections and ensure they are correctly set up. Refer to the LED indicator section in the manual for troubleshooting steps.
Tuhinga / Rauemi
 |
Beijer Electronics GT-1238 Kōwae Whakauru Mamati [pdf] Pukapuka Kaiwhakamahi GT-1238 Kōwae Tāuru Mamati, GT-1238, Kōwae Whakauru Mamati, Kōwae Whakauru |