Beijer GT-1428 Digital Input Output Module
8 digital input (sink), 8 digital output (source), 24 VDC, 0.5 A, diagnostic, cage clamp, 18 pt tauranga tango
Tuhinga ID: 137670
2025-02-20
Mana pupuri © 2025 Beijer Electronics AB. Pūmau te mana. Ko nga korero kei roto i tenei tuhinga ka whakarereke me te kore panui, ka tukuna mai i te wa o te panui. Kei a Beijer Electronics AB te mana ki te whakarereke i nga korero me te kore e whakahou i tenei panui. Karekau he kawenga a Beijer Electronics AB mo nga hapa ka puta mai i tenei tuhinga. Katoa exampKo nga mea kei roto i tenei tuhinga he mea hei whakapai ake i te maarama ki te mahi me te whakahaere o nga taputapu. Kaore e taea e Beijer Electronics AB te kawe i tetahi taunahatanga mena enei o muaampE whakamahia ana i roto i nga tono tuuturu. I roto view o te whānuitanga o nga tono mo tenei rorohiko, me whiwhi nga kaiwhakamahi i te matauranga kia tika ai te whakamahi i roto i a raatau tono motuhake. Ko nga tangata whai mana mo te tono me nga taputapu me whakarite kia tutuki ia tono ki nga whakaritenga katoa, paerewa me nga ture e pa ana ki te whirihoranga me te haumaru. Karekau a Beijer Electronics AB e whakaae mo nga kino i puta i te wa e whakauruhia ana, e whakamahi ana ranei i nga taputapu kua whakahuahia i roto i tenei tuhinga. Ka whakakorehia e Beijer Electronics AB nga whakarereketanga katoa, whakarereke, hurihanga ranei o nga taputapu.
Te Tari Matua
Beijer Electronics AB
Pouaka 426
201 24 Malmö, Huitene
www.beijerelectronics.com / +46 40 358600
Mo tenei pukapuka
This manual contains information on the software and hardware features of the Beijer Electronics GT-1428 Digital Input/Output Module. It provides in-depth specifications, guidance on installation, setup, and usage of the product.
Nga Tohu i Whakamahia i roto i tenei pukapuka
Kei roto i tenei whakaputanga nga tohu Whakatupato, Tupato, Panui, me nga tohu Hiranga i nga waahi e tika ana, hei tohu i nga korero e pa ana ki te haumaru me etahi atu korero nui. Ko nga tohu e rite ana me whakamaori penei:
WHAKATOKANGA
Ko te tohu Whakatupato e tohu ana i tetahi ahuatanga morearea, ki te kore e karohia, ka mate, ka whara nui ranei, ka mate nui ki te hua.
WHAKATAHI
The Caution icon indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate injury and moderate damage to the product.
FAKATOKANGA
Ko te tohu Panui he matohi i te kaipanui ki nga meka me nga tikanga e tika ana.
NUI
Ko te tohu Hiranga e whakaatu ana i nga korero whakahirahira.
Haumaru
- I mua i te whakamahi i tenei hua, panuihia tenei pukapuka me etahi atu pukapuka e tika ana. Kia tupato ki nga tohutohu haumaru!
- Karekau he take ka riro ma Beijer Electronics te haangai mo nga pakaru i puta mai i te whakamahinga o tenei hua.
- Ko nga whakaahua, exampKo nga tuhinga me nga hoahoa kei roto i tenei pukapuka kua whakauruhia hei kaupapa whakamaarama. Na te maha o nga taurangi me nga whakaritenga e pa ana ki tetahi whakaurunga, kaore e taea e Beijer Electronics te kawe kawenga, te kawenga ranei mo te whakamahi pono i runga i te tawhito.amples me nga hoahoa.
Tiwhikete Hua
Kei te hua nga tohu e whai ake nei.
Nga Whakaritenga mo te Haumaru Whanui
WHAKATOKANGA
- Do not assemble the products and wires with power connected to the system. Doing so causes an “arc flash”, which can result in unexpected, dangerous events
(burns, fire, flying objects, blast pressure, sound blast, heat). - Kaua e pa ki nga poraka kapeka, ki nga waahanga IO ranei i te wa e rere ana te punaha. Ma te mahi pera ka puta he wiri hiko, he ara iahiko poto, he kino ranei te mahi o te taputapu.
- Never let external metallic objects touch the product when the system is running. Doing so may cause an electric shock, a short circuit or malfunction of the device.
- Kaua e waiho te hua ki te taha o nga mea e mura ana. Ma te mahi pera ka puta he ahi.
- Ko nga mahi waea waea katoa me mahi e tetahi miihini hiko.
- I te wa e whakahaere ana i nga waahanga, me whakarite kia noho pai nga tangata katoa, te waahi mahi, me te kapi. A ape i te pa ki nga waahanga whakahaere, kei roto i nga waahanga nga waahanga hiko ka ngaro pea i te tuku hiko.
WHAKATAHI
- Kaua rawa e whakamahia te hua i roto i nga taiao me te pāmahana neke atu i te 60 ℃. A ape i te whakatakoto i te hua ki te ra tika.
- Kaua rawa e whakamahia te hua i roto i nga taiao neke atu i te 90% haumākū.
- Whakamahia i nga wa katoa te hua ki nga taiao whai tohu parahanga 1, 2 ranei.
- Whakamahia nga taura paerewa mo te waea.
Mō te Pūnaha raupapa-G
Ka mutu te punahaview
- Kōwae Whāurutau Whatunga – The network adapter module forms the link between the field bus and the field devices with the expansion modules. The connection to different field bus systems can be established by each of the corresponding network adapter modules, e.g., for MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc.
- Kōwae Roha – Momo kōwae roha: IO Mamati, IO Analog, me nga waahanga motuhake.
- Karere – E rua nga momo karere e whakamahia ana e te punaha: Karere ratonga me te karere IO.
IO Tukatuka Raraunga Mahere
An expansion module has three types of data: IO data, configuration parameters, and memory registers. The data exchange between the network adapter and the expansion modules is made via IO process image data by internal protocol.
Te rere raraunga i waenga i te urutau whatunga (63 mokowhiti) me nga waahanga whakaroa
The input and output image data depend on the slot position and the data type of the expansion slot. The ordering of the input and output process image data is based on the expansion slot position. Calculations for this arrangement are included in the manuals for the network adapter and programmable IO modules.
Ko nga raraunga tawhā whaimana kei runga i nga waahanga e whakamahia ana. Mo te exampKo nga tauira tairitenga he tautuhinga o te 0-20 mA ranei 4-20 mA ranei, me nga waahanga pāmahana he tautuhinga penei i te PT100, PT200, me te PT500. Ko nga tuhinga mo ia waahanga he whakaahuatanga mo nga raraunga tawhā.
Whakatakotoranga
Whakatakotoranga Taiao
| Te pāmahana whakahaere | -20°C – 60°C |
| UL pāmahana | -20°C – 60°C |
| Te pāmahana rokiroki | -40°C – 85°C |
| Te haumākū pātahi | 5% - 90% kore-whakamomona |
| Whakaeke | Rererangi DIN |
| Te mahi ohorere | IEC 60068-2-27 (15G) |
| Te ātete wiri | IEC 60068-2-6 (4 g) |
| Putanga ahumahi | EN 61000-6-4: 2019 |
| Ahumahi aukati | EN 61000-6-2: 2019 |
| Tūnga tāutanga | Poutū me te whakapae |
| Tiwhikete hua | CE, FCC, UL, cUL |
Whakatakotoranga Whānui
| Te tohanga mana | Max. 55 mA @ 5 VDC |
| Wehenga | I/O ki te arorau: Wehenga whakaahua |
| UL mana mara | Tukuna voltage: 24 VDC nominal, akomanga 2 |
| Mana mara | Tukuna voltage: 24 VDC ingoa ingoatage awhe: 15 – 30 VDC
Te tohanga mana: 40 mA @ 24 VDC |
| Waea waea | I/O te teitei taura. 0.75 mm2 (AWG 18) |
| Taumaha | 63 g |
| Rahi kōwae | 12 mm x 109 mm x 70 mm |
Ahu
Te rahi o te kōwae (mm)
Whakatakotoranga Whakauru
| Whakauru mo ia kōwae | 8 tohu momo totohu |
| Tohutohu | 8 te mana whakauru matomato |
| On-state voltage | 24 VDC ingoa
15 – 30 VDC @ 60 ℃ |
| I runga i te ahua o naianei | 2.25 mA @ 24 VDC
3 mA @ 30 VDC |
| Off-state voltage | 8 VDC @ 25 ℃ |
| Te whakaroa tohu whakauru | OFF ki ON: Max. 0.3 ms
ON ki OFF: Max. 0.3 ms |
| tātari tāuru | Ka taea te whakarite, tae atu ki te 10 ms |
| Impedance tāuru ingoa | 10.2K Ω angamaheni |
Whakatakotoranga Huaputa
| Nga putanga mo ia kōwae | 8 tohu momo puna |
| Tohutohu | 8 te mana whakauru matomato |
| Putanga voltage awhe | 24 VDC ingoa
15 – 30 VDC @ 60 ℃ |
| On-state voltage maturuturu | 0.3 VDC @ 25 ℃
0.6 VDC @ 60 ℃ |
| I runga i te whenua min. nāianei | Min. 1 mA |
| Te naianei turuturu o waho | Max. 10 uA |
| Te whakaroa tohu whakaputa | OFF ki ON: Max. 0.1 ms
ON ki OFF: Max. 0.35 ms |
| Whakatauranga o naianei putanga | Max. 0.5 A mo ia hongere / Max. 4 A mo ia waeine |
| Parenga | Over current limit: 2.2 A @ 25 °C each channel Thermal shutdown: 175 °C
Parenga ara-poto |
Hoahoa Waea
| Pin no. | Whakaahuatanga tohu |
| 0 | Huarere whakauru 0 |
| 1 | Hongere putanga 0 |
| 2 | Huarere whakauru 1 |
| 3 | Hongere putanga 1 |
| 4 | Huarere whakauru 2 |
| 5 | Hongere putanga 2 |
| 6 | Huarere whakauru 3 |
| 7 | Hongere putanga 3 |
| 8 | Huarere whakauru 4 |
| 9 | Hongere putanga 4 |
| 10 | Huarere whakauru 5 |
| 11 | Hongere putanga 5 |
| 12 | Huarere whakauru 6 |
| 13 | Hongere putanga 6 |
| 14 | Huarere whakauru 7 |
| 15 | Hongere putanga 7 |
| 16 | Taunoa (Te mana mara 0 V) |
| 17 | Taunoa (Te mana mara 24 V) |
Tohu LED
| LED no. | Mahi / whakaahuatanga LED | tae arahina |
| 0 (left side) | INPUT hongere 0 | Kakariki |
| 1 | INPUT hongere 1 | Kakariki |
| 2 | INPUT hongere 2 | Kakariki |
| 3 | INPUT hongere 3 | Kakariki |
| 4 | INPUT hongere 4 | Kakariki |
| 5 | INPUT hongere 5 | Kakariki |
| 6 | INPUT hongere 6 | Kakariki |
| 7 | INPUT hongere 7 | Kakariki |
| 0 (right side) | hongere PUTANGA 0 | Kakariki |
| 1 | hongere PUTANGA 1 | Kakariki |
| 2 | hongere PUTANGA 2 | Kakariki |
| 3 | hongere PUTANGA 3 | Kakariki |
| 4 | hongere PUTANGA 4 | Kakariki |
| 5 | hongere PUTANGA 5 | Kakariki |
| 6 | hongere PUTANGA 6 | Kakariki |
| 7 | hongere PUTANGA 7 | Kakariki |
Tūnga Hongere LED
LED no. 0-7 (left side)
| Tūnga | LED | Tohutohu |
| Kaore he tohu | Wehe | Mahi noa |
| I runga tohu | Kakariki | Mahi noa |
LED no. 0-7 (right side)
| Tūnga | LED | Tohutohu |
| Kaore he tohu | Wehe | Mahi noa |
| I runga tohu | Kakariki | Mahi noa |
| Te hē o te hongere | kohiko | Short to GND Over current
Neke atu i te pāmahana |
Mahere Raraunga ki te Ripanga Atahanga
Whakauruhia nga raraunga kōwae
| D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
| D15 | D14 | D13 | D12 | D11 | D10 | D9 | D8 |
Uara whakapakoko tāuru
| Bit no. | Moka 7 | Moka 6 | Moka 5 | Moka 4 | Moka 3 | Moka 2 | Moka 1 | Moka 0 |
| Paita 0 | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
| Paita 1 | D15 | D14 | D13 | D12 | D11 | D10 | D9 | D8 |
Uara whakaahua putanga
| Bit no. | Moka 7 | Moka 6 | Moka 5 | Moka 4 | Moka 3 | Moka 2 | Moka 1 | Moka 0 |
| Paita 0 | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
Output module data
| D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
Raraunga Tawhā
Tawhā tika roa: 4 paita
| Bit no. | Moka 7 | Moka 6 | Moka 5 | Moka 4 | Moka 3 | Moka 2 | Moka 1 | Moka 0 |
| Paita 0 | Fault action (ch0 – ch7) 0: Fault value
1: Hold last state |
|||||||
| Paita 1 | Fault value (ch0 – ch7) 0: Off
1: Kei runga |
|||||||
| Paita 2 | Uara tātari tāuru: 0 – 10 (wae: ms) | |||||||
| Paita 3 | Kua rahuitia | |||||||
Tatūnga Pūmārō
WHAKATAHI
- I nga wa katoa panuihia tenei upoko i mua i te whakauru i te waahanga!
- Mata wera! Ka wera te mata o te whare i te wa e mahi ana. Mēnā ka whakamahia te taputapu i roto i te pāmahana teitei, me whakamatao te taputapu i mua i te pa ki a ia.
- Ko te mahi i runga i nga taputapu kaha ka pakaru nga taputapu! Whakawetohia te hiko hiko i mua i te mahi i runga i te taputapu.
Nga Whakaritenga Mokowā
The following drawings show the space requirements when installing the G-series modules. The spacing creates space for ventilation and prevents conducted electromagnetic interference from influencing the operation. The installation position is valid vertically and horizontally. The drawings are illustrative and may be out of proportion.
WHAKATAHI
KORE e whai i nga whakaritenga mokowhiti ka hua pea te kino o te hua.
Maunga Kōwae ki DIN Rail
Ko nga upoko e whai ake nei e whakaatu ana me pehea te whakairi i te waahanga ki te reera DIN.
WHAKATAHI
Me whakatika te kōwae ki te rail DIN me nga raka maukati.
Maunga GL-9XXX, GT-XXXX Module ranei
Ko nga tohutohu e whai ake nei ka pa ki enei momo waahanga:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Ko nga waahanga GN-9XXX e toru nga raka maukati, kotahi kei raro, e rua ki te taha. Mo nga tohutohu whakapuru, tirohia te Maunga GN-9XXX Module.
Maunga GN-9XXX Kōwae
Ki te whakairi, ki te whakaheke ranei i te urutau whatunga, i te kōwae IO ka taea te hōtaka me te ingoa hua GN-9XXX, mo muaample GN-9251, GN-9371 ranei, tirohia nga tohutohu e whai ake nei:
Maunga Poraka Kapeka Tangohia
Ki te whakairi, ki te whakaheke ranei i tetahi paraka ka taea te tango (RTB), tirohia nga tohutohu kei raro nei.
Honoa nga Tauera ki te Poraka Kapeka Tango
Hei hono/motuhia nga taura ki/mai i te paraka kapeka tango (RTB), tirohia nga tohutohu kei raro nei.
WHAKATOKANGA
Whakamahia i nga wa katoa te tuku voltage me te auau ki te aukati i te kino o nga taputapu me te whakarite i te mahi tino pai.
Te Mana Mara me nga Pins Raraunga
Ko te whakawhitiwhiti korero i waenga i te urutau whatunga G-rangatū me te kōwae roha, tae atu ki te punaha / mara hiko o nga waahanga pahi, ka mahia ma te pahi o roto. Kei roto e 2 nga titi hiko o te mara me te 6 nga titi Raraunga.
WHAKATOKANGA
Kaua e pa ki nga raraunga me nga titi hiko mara! Ko te pa ka pa ki te paru me te pakaru i te haruru ESD.
| Pin no. | Ingoa | Whakaahuatanga |
| P1 | Pūnaha VCC | Pūnaha tuku voltage (5 VDC) |
| P2 | Pūnaha GND | Te whenua o te punaha |
| P3 | Putanga tohu | Tauranga putanga tohu o te kōwae pūtukatuka |
| P4 | Putanga rangatū | Tauranga putanga tuku o te kōwae pūtukatuka |
| P5 | Whakauru rangatū | Ko te tauranga whakauru kaiwhiwhi o te kōwae tukatuka |
| P6 | Kua rahuitia | Kua rahuitia mo te tohu whakawhiti |
| P7 | Pae GND | Papa whenua |
| P8 | VCC mara | Tuku mara voltage (24 VDC) |
Beijer Electronics, Doc ID: 137670
Tuhinga / Rauemi
 |
Beijer GT-1428 Digital Input Output Module [pdf] Pukapuka Kaiwhakamahi GT-1428, GT-1428 Digital Input Output Module, GT-1428, Digital Input Output Module, Input Output Module, Output Module, Module |