matua Eclipse-2.0 Paewhiri Pa
Ihirangi mokete
- Matua Eclipse 2.0 5″ Paewhiri Pa
- Tīwiri
- Tautoko Whakaeke Whakarewa
- Kaihono
Whakatakotoranga Hangarau
Waehanga
- 30 VDC
- ETH(POE)
- KNX
- Whakauru
- Pūoko Tata
- LCD
- Paewhiri Pa
- Kaikōrero
- hopuoro
- Te pāmahana me te haumākū pūoko
Nga Korero Haumaru
Whakatupato
- Installation, electrical connection, and directives, for which the device has configuration and comissioning of been certified, is no longer the device can only be carried out guaranteed. by qualified personnel in compliance with the applicable
- To clean use a dry cloth. It must be technical standarts and laws of avoid the use of solvents or the respective countries. other aggressive substances.
- The electrical connection of the Contact with fluids to the plate device can only be carried out by and socket is to be avoided. qualified personnel. Incorrect installation may result in electric
- The device can not be installed shock or fire. Before making the close to the heat sources such as electrical connections, make sure the power supply has been turned off.
- Kaua e hono te vol matuatage (230V AC) ki te whakauru VDC, te whakauru mamati me te hononga KNX o te taputapu.
- Ko te whakatuwhera i te whare o te taputapu ka mutu tonu te wa whakamana.
- I te take o tampering, the compliance with the essential requirements of the applicable radiators or house hold appliances or in position subjected to direct sunlight.
- Me whakanoho te taputapu ki runga i te pakitara o roto i te teitei o te 1,5m me te 0,3m te tawhiti atu i nga kuaha.
Whakaeke
- Whakanuia te tautoko whakapuru whakarewa. (Kei roto i te pouaka.)
Use screws included in the box (M3x15 mm)
Do not overtighten the screw - Connect ethernet cable, digital input (if used), KNX cable and DC power cable to the device.
Check that polarities are correct.
- Tuhia ki runga i nga riipene o raro
- Āpitihia ngā topenga o runga
- Press and place the device with both hands simultaneously on the right and left sides
Pushing the device straight into the clips might damage
Komihana
- Eclipse 2.0 5″ Paewhiri Pa e whirihorahia ana ma te whakaurunga web atanga. Kua tautuhia te atanga whatunga Itarangi ki te aratau DHCP ma te taunoa.
- Honoa te Eclipse 2.0 5″ Paewhiri Pa ki te whatunga kei a ia he tūmau DHCP mā te whatunga whare, whare hanga ranei.
- Go to settings in Eclipse 2.0 5″ Touch Panel user interface and then get IP address of Touch Panel. If there is no DHCP server on network, set IP address of Touch Panel manually. For this check programming manual.
- Whakauruhia te wahitau IP ki web-pūtirotiro, ka tomo ingoa kaiwhakamahi me te kupuhipa
- Ingoa kaiwhakamahi taunoa: webKaiwhakahaere
- Default password: wa1234
- Mo te tautoko i etahi atu taahiraa, tirohia te pukapuka Papatonotanga.
Care Bina Otamasyon Sistemleri Ltd. www.core.com.tr
Tuhinga / Rauemi
 |
matua Eclipse-2.0 Paewhiri Pa [pdf] Aratohu Kaiwhakamahi Eclipse-2.0, Eclipse-2.0 Paewhiri Pa, Eclipse-2.0, Paewhiri Pa, Paewhiri |
