DeepCool AK400 CPU Cooler Ki te Whakaaturanga Tūnga
Whakatakotoranga
- Tauira: DeepCool AK400 Digital CPU Cooler
- Hangarau Poutoko
- Intel: LGA 1150/1151/1155/1156/1200/1700
- AMD: AM4/AM5
- Cooling Capacity (TDP): Tae atu ki te 220W
- Paipa wera: 4 x 6mm direct-touch copper heat pipes
- Kaiwhaiwhai:
- Rahi: 120mm x 120mm x 25mm
- Momo: Fluid Dynamic Bearing (FDB)
- Tere: 500–1850 RPM ±10%
- Rererangi: Up to 68.99 CFM
- Taumata Haruru: ≤28 dB(A)
- Kaihono: 4-titi PWM
- Whakatauhia Voltage: 12V DC
- Whakamahi Hiko: 1.44W
- Rarama LED: Addressable RGB
- Kaihono: 3-pin (+5V-D-G) and 9-pin USB 2.0
- Ahu:
- Te nuinga: 126mm (L) x 97mm (W) x 156mm (H)
- Heatsink: 120mm (L) x 60mm (W) x 152mm (H)
- Taumaha: Tata ki te 695g
Huihuinga me nga Tohutohu Whakauru
Utauta Hiahia
- Panikitini Piri
- Whakapiri wera (mehemea karekau i te tono i mua)
- Cleaning cloth or isopropyl alcohol (for CPU surface prep)
Step 1: Prepare the Motherboard
- Power off your PC and unplug all cables.
- Remove the existing CPU cooler if applicable.
- Clean the CPU surface using a lint-free cloth and isopropyl alcohol to remove old thermal paste.
Step 2: Install the Backplate
- Place the provided motherboard backplate on the rear side of the motherboard.
- Align the holes of the backplate with the CPU socket mounting holes.
Step 3: Attach Standoffs
- Insert the standoffs through the motherboard aligned with the backplate.
- Tighten the standoffs gently; they will hold the cooler firmly in place.
Step 4: Apply Thermal Paste
- Hoatu he pi iti te rahi o te whakapiri waiariki ki waenganui o te PTM.
- If your AK400 cooler comes with pre-applied thermal paste, skip this step.
Step 5: Mount the Cooler
- Align the AK400 cooler base over the CPU, ensuring the mounting holes match the standoffs.
- Carefully place the cooler onto the CPU and press gently.
- Secure the cooler using the provided screws in a diagonal pattern to ensure even pressure.
Step 6: Attach the Fan
- Attach the fan to the heatsink using the included clips or screws.
- Ensure the airflow direction is correct (usually indicated by arrows on the fan).
Step 7: Connect the Fan & Display
- Plug the fan power cable into the CPU_FAN header on the motherboard.
- Connect the status display cable to the appropriate motherboard or power header as specified in the manual.
Hipanga 8: Nga Tirohanga Whakamutunga
- Double-check that all screws are tight and the cooler is secure.
- Ensure cables are connected and not obstructing the fan.
- Close the PC case and reconnect the power.
Step 9: Power On & Monitor
- Turn on your PC and check the status display for proper operation.
- Monitor CPU temperatures in BIOS or using software to ensure proper cooling performance.
Tohutohu
- Handle the cooler carefully; the display panel can be fragile.
- Do not overtighten screws; excessive pressure can damage the CPU or motherboard.
- Make sure airflow is not blocked by other components.
- After installing the product, turn on the PC, download and install the software, and the product-function control has been enabled on, webpae.www.deepcool.com/downloadpage/
- Nga whakaritenga putanga o te punaha whakahaere: Windows 10/Windows 11
FAQ
How do I install the AK400 Digital?
The cooler comes with an all-metal mounting bracket designed for easy installation on various platforms. Detailed installation instructions are provided in the user manual.
Ka taea e au te whakarite i te rama RGB?
Yes, the AK400 Digital features addressable RGB lighting that can be customized using compatible software or motherboard RGB headers.
Tuhinga / Rauemi
 |
DeepCool AK400 CPU Cooler Ki te Whakaaturanga Tūnga [pdf] Pukapuka Kaiwhakamahi AK400 CPU Cooler Me te Whakaatu Turanga, AK400, CPU Cooler Me te Whakaatu Turanga, Turanga Whakaaturanga, Whakaaturanga |