ED-MONITOR-116C
Pukapuka Kaiwhakamahi
by EDA Technology Co., Ltd
built: 2025-08-01
1 Pukapuka Pumau
Ko tenei upoko e whakaatu ana i te huaview, rarangi whakakakahu, ahua, patene, tohu, me nga atanga.
1.1 Neke atuview
Ko te ED-MONITOR-116C he 11.6-inihi te aroturuki ahumahi e whakaatu ana i te taumira mata o 1920 × 1080, he kanapa teitei o 450 cd/m², me te mata pa capacitive multi-touch. Kei roto ko tetahi atanga HDMI paerewa, kotahi tauranga USB Momo-C, kotahi atanga hiko DC Jack, me tetahi jack ororongo 3.5mm, kia hototahi ai ki nga tini kaihautu PC kaupapa whanui. Ka taea te whakatika i te rama o muri me te rōrahi ma te paatene me te rorohiko, ka whakamahia i roto i nga tono whakahaere ahumahi.
- Ko te atanga HDMI ka taea te hono tika ki te putanga HDMI o te kaihautu PC.
- Ko te tauranga USB Momo-C ka tukuna nga tohu mata pa.
- E tautoko ana te jack ororongo 3.5mm i te hononga orooro.
- Ko te atanga mana DC Jack e tautoko ana i te whakaurunga 12V~24V DC.
1.2 Rarangi Tarapi
- 1 x ED-MONITOR-116C Aroturuki
- 1 x Kete Whakanoho (tae atu ki te 4 x nga maaka, 4xM4*10 nga wiri me te 4xM4*16 nga wiri)
1.3 Te ahua
Ko tenei waahanga e whakaatu ana i nga mahi me nga whakamaramatanga o nga atanga ki ia panui.
1.3.1 Paewhiri Mua
Te whakauru i nga momo me nga whakamaramatanga o nga atanga kei te papa o mua.
| NO. | Whakaahuatanga |
| 1 | 1 × LCD mata, 11.6-inihi mata pa ki te taumira o 1920×1080, maha-pa capacitive mata pa. |
1.3.2 Paewhiri Whakamuri
Te whakauru i nga momo me nga whakamaramatanga o nga atanga kei te paewhiri o muri.
| NO. | Whakaahuatanga |
| 1 | 4 x kohao whakaurunga o te mahanga, ka whakamahia hei whakatika i nga mahanga ki te taputapu mo te whakaurunga. |
| 2 | 4 x VESA kohao whakapuru, kua rahuitia mo te whakaurunga taiapa VESA. |
1.3.3 Paewhiri Taha
Te whakauru i nga momo me nga whakamaramatanga o nga atanga kei te taha taha.
| NO. | Whakaahuatanga |
| 1 | 1 x tohu hiko whero, te whakamahi ki view te mana o te taputapu me te mana o te hiko. |
| 2 | 1 x DC tāuru, DC Jack tūhono, e tautoko 12V~24V DC tāuru. |
| 3 | 1 x 3.5mm tiwharewha oro oro putanga jack, tautoko hononga waea. |
| 4 | 1 x HDMI whakauru, Momo-A hono, e hono ana ki te putanga HDMI o te kaihautu PC. |
| 5 | 1 x USB tauranga pa mata, Momo-C USB tūhono, e hono ana ki te tauranga USB o te ope PC ki te tuku tohu mata pa. |
| 6 | Nga kohao tohanga wera, ka awhina i te whakapai ake i te mahi whakamatao. |
| 7 | 1 x Rubber plug (i mua i te werohia 7mm diameter porohita poka ararere taura), i hangaia hei whakatutuki i etahi atu hiahia whakahaere taura. |
| 8 | 1 x “Brightness -” button, press the button to decrease the backlight brightness of the LCD screen. |
| 9 | 1 x pātene "Brightness +", pehia te paatene hei whakanui ake i te kanapa o te mata LCD. |
| 10 | 1 x "Volume -" pātene, pēhi i te pātene ki te whakaiti i te rōrahi putanga. |
| 11 | 1 x te paatene "Volume +", pehia te paatene hei whakanui ake i te rōrahi whakaputa. |
| 12 | 1 x pātene "Wahangu", pehia te paatene kia wahangu te ororongo whakaputa. |
| 13 | Nga kohao tohanga wera, ka awhina i te whakapai ake i te mahi whakamatao. |
Kei roto i te taputapu ED-MONITOR-116C e rua nga paatene whakatikatika maramara o muri me nga paatene whakatikatika rōrahi e toru. He pango te tae o nga paatene me te tohu ki nga tapanga kua taia-mata 
, 
, 
, 
a 
i runga i te whare.
| Pātene | Whakaahuatanga |
|
Patohia te paatene hei whakanui ake i te kanapa o te mata LCD. |
|
Patohia te paatene hei whakaiti i te kanapa o te rama o te mata LCD. |
|
Press the button to increase the output volume. |
|
Press the button to decrease the output volume. |
|
Press the button to mute the output audio. |
1.5 Tohu
Kei roto i te taputapu ED-MONITOR-116C he tohu hiko whero, kua tohua ki te tapanga mata-taa "PWR" i runga i te whare.
| Tohutohu | Tūnga | Whakaahuatanga |
| PWR | On | Kua whakahikohia te taputapu. |
| Kimo | He rereke te tuku hiko o te taputapu, me whakamutu tonu te tuku hiko. | |
| Wehe | Kaore te taputapu i te hiko. |
1.6 Atanga
Te whakauru i nga whakamaramatanga me nga mahi o ia atanga i roto i te ED-MONITOR-116C.
1.6.1 Atanga Hiko
Kei roto i te taputapu ED-MONITOR-116C 1 te tauranga whakauru hiko me te hono DC Jack, kua tapaina he "24V DC" i runga i te whare. E tautoko ana i te 12V~24V DC whakaurunga.
TIP
Ka tūtohuhia he urutau hiko 12V 4A.
1.6.2 Atanga HDMI
Kei roto i te taputapu ED-MONITOR-116C te atanga whakauru HDMI 1 me te hononga Momo-A, kua tapaina "HDMI INPUT" i runga i te whare, i whakamahia hei hono atu ki te putanga HDMI o te kaihautu PC.
1.6.3 Momo-C USB Atanga
Kei roto i te taputapu ED-MONITOR-116C te 1 Type-C USB atanga, tapaina "USB TOUCH" i runga i te whare. Ka hono tenei atanga ki te tauranga USB o te kaihautu PC ki te tuku tohu mata pa.
1.6.4 Atanga Ororongo
Kei roto i te taputapu ED-MONITOR-116C 1 atanga ororongo (3.5mm 4-pole headphone jack), tapaina “
” i runga i te whare, e tautoko ana i nga putanga ororongo tiwharewha.
2 Te whakauru i te taputapu
Ko te taputapu ED-MONITOR-116C e tautoko ana i te whakaurunga o mua. Kei roto i te kohinga paerewa te kete whakaurunga whakaurunga (ED-ACCHMI-Mua).
Whakaritenga:
- Kua riro mai te kete ED-ACCHMI-Front Mounting kit (kei roto 4 × M4*10 tīwiri, 4 × M4*16 tīwiri, me te 4 mahanga).
- Kua whakaritea he huriwiri ripeka.
Hipanga:
1. Determine the cutout dimensions on the cabinet based on the ED-MONITOR-116C’s size, as shown in the figure below.
Waeine: mm
2. Drill holes on the cabinet according to the aperture size defined in Step 1.
3. Embed the ED-MONITOR-116C into the cabinet from the exterior side.
4. Tiarohia nga kohao wiri (kahore he miro) o nga mahanga ki nga kohao whakairi mahanga i te taha o te taputapu.
5. Secure the snaps to the device.
- Use 4 × M4*10 screws to fasten the snaps to the device by threading them through the nonthreaded holes and tightening them clockwise.
- Na, whakamahia nga mahanga 4 × M4*16 hei mau i nga mahanga ki te rūnanga: Whakauruhia ki roto i nga kohao miro o nga mahanga, pehia ki te taha o roto o te rūnanga, ka miro ki te karaka karaka kia tino piri.
3 Te whakamahi i te taputapu
Ko te ED-MONITOR-116C e hiahia ana he kaihautu PC mo te mahi me te kore e hiahiatia te whakaurunga taraiwa. Honoa ki te putanga HDMI o te kaihautu PC tuatahi, katahi ka hiko ki te taputapu kia taea ai te whakaatu noa. Ka tautokohia te whakamarama o muri me te whakarereketanga oro ma nga paatene whakatapua me te rorohiko.
3.1 Hononga taura
Ko tenei waahanga e whakaatu ana me pehea te hono i nga taura.
Whakaritenga:
- Kua whiwhihia he urutau hiko mahi.
- Kua riro mai he kaihautu PC mahi.
- Ko nga taura HDMI me nga taura USB (Momo-A ki te Momo-C USB taura) kua riro mai.
Hoahoa hoahoa o nga taura hono:
Tena tirohia 1.6 Atanga to obtain the pin definitions and wiring methods of each interface.
TIP
The HDMI INPUT interface of the ED-MONITOR-116C is compatible with various PC hosts. The figure below illustrates cable connection using a Raspberry Pi as an example.
- Tuku Hiko
- Puorooro
- Rahipere Pi
3.2 Whakarewa i te taputapu
Ko te ED-MONITOR-116C kaore i te whakauru i te huringa hiko tinana. I muri i te hono atu ki tetahi puna hiko, ka hiko aunoa te taputapu. I te wa kua oti te mahi, ka whakaatuhia te papamahi o te kaihautu PC hono.
3.3 Te whakatikatika i te kanapa me te Rōrahi
Ko te ED-MONITOR-116C e tautoko ana i te kanapa me te whakarereketanga oro ma te paatene tinana me te rorohiko.
I te wa e mahi ana te ED-MONITOR-116C, ka taea te whakatika te kanapa me te rōrahi o te mata ma nga paatene whakatapua e rima kei te taha taha.
| Pātene | Whakaahuatanga |
|
Patohia te paatene hei whakanui ake i te kanapa o te mata LCD. |
|
Patohia te paatene hei whakaiti i te kanapa o te rama o te mata LCD. |
|
Press the button to increase the output volume. |
|
Press the button to decrease the output volume. |
|
Press the button to mute the output audio. |
3.3.2 Whakaritea te Tirohanga me te Rōrahi mā te Pūmanawa
Ina hono te ED-MONITOR-116C ki te kaihautu PC me te whakaatu tika, ka taea te whakatika te rama o te mata me te rōrahi whakaputa ma te rorohiko. He rereke nga tikanga mahi mo nga putanga Papamahi me te Lite OS.
3.3.2.1 Raspberry Pi OS (Papamahi)
Te whakaatu me pehea te whakatika i te kanapa o muri ma te UI i te Raspberry Pi OS (Papamahi).
Whakaritenga:
- Ko te ED-MONITOR-116C e hono tika ana ki te ope Raspberry Pi me te putanga whakaatu noa.
- Ko te kaihautu Raspberry Pi he hononga whatunga pumau.
Hipanga:
1. Tāpirihia he putunga pai EDATEC ma te whakahaere i nga whakahau e whai ake nei i roto i te tauranga.
2. Tāutahia te kete taputapu rorohiko.
3. Pāwhiritia te 
icon i te kokonga papamahi runga-mauī. Na ka tohua ki te "Utauta Pūnaha" → "EDATEC Monitor".
4. Whakaritea te kanapa me te rōrahi ma te whakamahi i te rēreti i te paewhiri "EDATEC Backlight".
TIP
Support executing the 
command in the terminal window to open the “EDATEC Backlight” panel.
3.3.2.2 Raspberry Pi OS (Lite)
Te whakatikatika i te kanapa me te rōrahi mā te CLI i runga i te Raspberry Pi OS (Lite).
Whakaritenga:
- Ko te ED-MONITOR-116C e hono tika ana ki te ope Raspberry Pi me te putanga whakaatu noa.
- Ko te kaihautu Raspberry Pi he hononga whatunga pumau.
Hipanga:
1. Tāpirihia he putunga pai EDATEC ma te whakahaere i nga whakahau e whai ake nei i roto i te tauranga.
2. Tāutahia te kete taputapu rorohiko.
3. Whakahaerehia nga whakahau e whai ake nei ki te uiui i te taumata wherikotanga o naianei me nga tautuhinga taumata rōrahi.
- Uiui taumata wherikotanga onāianei:
- Uiui taumata rōrahi onāianei:
4. Execute the following commands to set brightness level and volume level as required.
- Tautuhi taumata wherikotanga:
Kei hea 
represents the brightness level with a range of 0~100.
- Tautuhi taumata rōrahi:
Kei hea 
represents the volume level with a range of 0~100.
Īmēra: sales@edatec.cn / support@edatec.cn
Web: www.edatec.cn
Waea: +86-15921483028(Haina) | +86-18217351262(Tawahi)
Tuhinga / Rauemi
 |
Hangarau EDA ED-MONITOR-116C Aroturuki Ahumahi me te Whakaaturanga [pdf] Pukapuka Kaiwhakamahi ED-MONITOR-116C Aroturuki Ahumahi me te Whakaaturanga, ED-MONITOR-116C, Aroturuki Ahumahi me te Whakaaturanga, Aroturuki me te Whakaaturanga, Whakaaturanga |