ELSYS EXT-Module Wireless Sensors
Whakatakotoranga
- Ingoa Hua: Kōwae-TAHI
- Tauira: EXT-Module, Rev C
- Rā Whakaputa: 29.04.2025
- Whakauru Voltage: Te mana o waho i roto, 5-24V
- Putanga Voltage: On/off or 0-10V output
- Constant Output: 3.3V
- Putanga o nāianei: Max 10mA @ 12V in, max 5mA @ 24V in
- Hononga Ahokore: Compatible with ELT LoRa
Nga Tohutohu Whakamahi Hua
Tāutatanga
- Ensure the ELT LoRa device is powered off before installing the EXT-Module.
- Insert the EXT-Module into the designated slot inside the ELT LoRa device.
- Connect external power input (5-24V) to the designated port on the EXT-Module.
- Make necessary connections for sensors or actuators as per your application requirements.
- Power on the ELT LoRa device and verify proper functionality of the EXT-Module.
Aratau Whakamahi
- The EXT-Module can be used in two primary modes.
- Class C Device: For connecting external power and actuators, set the EXT-Module accordingly.
- Class A Device: For connecting sensors, configure the EXT-Module to operate as a class A device.
Whirihoranga Huaputa
- The EXT-Module offers on/off or 0-10V output options. For 0-10V output, ensure the external power supply is at least 11V.
Hononga Ahokore
- The EXT-Module is designed to wirelessly connect to the ELT LoRa device for seamless data transmission from sensors or actuators.
WHAKATOKANGA
- The EXT-module is a module that fits inside the ELT LoRa and is intended for connecting external power and actuators, and is used as a class C device. It can also connect to sensors and be used as a class A device.
Runga view
Ngā āhuatanga
- Hononga mo te hiko o waho
- Hunga / Weto
- 0 – 10 V putanga
- General-purpose input
- Ka uru ki roto i te pouaka ELT-2
- Ka kaha te ELT-2
- Switching between functions is done with jumpers.
Raro view
Whakatakotoranga
- Whakauru voltage: 5 – 24 V DC
- On/Off output: Mōrahi 0.7 A
- 0 – 10 V putanga: Max 5 mA
- Ka taea te whakaheke i te whakauru ki te 50 V
WRING DIAGRAM
- On/off or 0-10V output (for 0-10V, ext. power needs to be at least 11V)
- Te mana o waho i roto, 5-24V
- Input to ELT LoRa. 10 or 50V range.
- Connect a 500 ohm resistor between the inputs for 4-20mA (10V range)
- Putanga 3.3V tonu. Max 10mA @ 12V i roto i, max 5mA @ 24V i roto i
- Electronic systems in Umeå AB Tvistevägen 48, 90736 Umeå, Sweden
- Ī-mēra: info@elsys.se
- Web: www.elsys.se
- Ko nga korero i roto i tenei tuhinga ka whakarereke me te kore panui.
- ©Electronic systems in Umeå AB 2023
Pātai Auau
He aha te morahi tāuru voltage supported by the EXT-Module?
The EXT-Module supports an input voltage range of 5-24V for external power sources.
How can I configure the EXT-Module for sensor usage?
To use the EXT-Module with sensors, set it to operate as a Class A device and make the necessary sensor connections as per the provided instructions.
He aha te kupu whakaputanga voltage for actuators?
The EXT-Module provides an on/off or 0-10V output option. For actuators, you can use either mode based on your requirements.
Tuhinga / Rauemi
 |
ELSYS EXT-Module Wireless Sensors [pdf] Pukapuka Tohutohu EXT-Module Wireless Sensors, EXT-Module, Wireless Sensors, Sensors |