ESPRESSIF ESP32-C6-DevKitC-1 Poari Whakawhanaketanga
ESP32-C6-DevKitC-1 v1.2
Whakatakotoranga
- Kōwae: ESP32-C6-WROOM1 ranei ESP32-C6WROOM-1U
- Āhuatanga Tautoko: Wi-Fi 6 (2.4 GHz band), Nihokikorangi 5, IEEE 802.15.4 (Zigbee 3.0 me te Miro 1.3)
- Mahara Kohiko: 8 MB SPI flash
- Mahinga Mana: 5 V ki te 3.3 V LDO
- Tauranga USB: USB Momo-C e tika ana me te USB 2.0 tere tonu (12 Mbps tere whakawhiti)
- Nga Pins GPIO: Ko nga titi GPIO katoa e waatea ana (haunga te pahi SPI mo te uira) ka pakaru ki nga pane pane i runga i te papa.
- LED: 3.3 V Power On LED
- Patene: Patene Whakaara, Patene Tautuhi
- RGB LED: RGB LED Addressable na GPIO8
Nga Tohutohu Whakamahi Hua
Tatūnga Pūmārō Tuatahi
- Tirohia te ESP32-C6-DevKitC-1 mo nga tohu kino.
- Honoa te hiko ki te tauranga USB Momo-C i runga i te papa.
Maamaa Utu
- Me mohio kei te hiko te ESP32-C6-DevKitC-1 me te hono ki to rorohiko ma te USB.
- Purihia te paatene Whakaara ka peehia te paatene Tautuhi kia uru atu ki te aratau Download Firmware.
- Whakamahia te taputapu rorohiko e tika ana hei whakakorikori i te firmware ki runga i te maramara ma te tauranga rangatū.
Whanaketanga Taupānga
- Whāia te aratohu ESP-IDF Tīmata ki te whakarite i te taiao whanaketanga.
- Kia oti te whakarite, ka taea e koe te whakawhanake me te whakakorikori i au ake tono ki te papa ESP32-C6-DevKitC-1.
FAQ
Q: Me pehea taku tono hokohoko samphe iti o ESP32-C6-DevKitC-1?
A: Mo nga ota hokohoko, tirohia koa https://www.espressif.com/en/company/contact/buy-a-sample.
Q: Me pehea taku tuku ota rarawe mo ESP32-C6-DevKitC-1?
A: Mo nga ota rarawe, tirohia nga korero mo te Whakataunga Hua Espressif (PDF).
Q: Me pehea e taea ai e au te ine i te naianei i tuhia e te ESP32-C6-WROOM-1(U) kōwae?
A: Ko nga pane J5 kei runga i te ESP32-C6-DevKitC-1 ka taea te whakamahi mo te ine o naianei. Tirohia nga korero i roto i te waahanga "Inenga o naianei".
ESP32-C6-DevKitC-1 v1.2 Ko te putanga tawhito: ESP32-C6-DevKitC-1 v1.1 Ma tenei aratohu kaiwhakamahi e awhina koe ki te timata me te ESP32-C6-DevKitC-1 me te whakarato i etahi atu korero hohonu. . Ko te ESP32-C6-DevKitC-1 he papa whanaketanga taumata-urunga e pa ana ki te ESP32-C6-WROOM-1(U), he waahanga kaupapa whanui me te rama SPI 8 MB. Ka whakauruhia e tenei poari nga mahi Wi-Fi katoa, Bluetooth LE, Zigbee, me nga mahi Miro. Ko te nuinga o nga titi I/O ka pakaru ki nga pane pane i nga taha e rua mo te ngawari o te atanga. Ka taea e nga kaiwhakawhanake te hono atu i nga peripheral ki nga waea pekepeke, te whakairi ranei i te ESP32-C6-DevKitC-1 ki runga i te papa paraharaha.
Kei roto i te tuhinga nga waahanga nui e whai ake nei:
- Te timatanga: Ka mutuview o ESP32-C6-DevKitC-1 me nga tohutohu tatūnga taputapu/rorohiko hei timata.
- Tohutoro Pūmārō: Nga korero taipitopito mo te taputapu ESP32-C6-DevKitC-1.
- Nga Taipitopito Whakahoutanga Taputapu: Te hitori whakahou, nga take e mohiotia ana, me nga hononga ki nga kaiarahi kaiwhakamahi mo nga putanga o mua (mehemea he) o ESP32-C6-DevKitC-1.
- Tuhinga e pa ana: Hononga ki nga tuhinga e pa ana.
Te Timata
Ko tenei waahanga he korero whakataki poto mo te ESP32-C6-DevKitC-1, nga tohutohu me pehea te mahi i te tatūnga taputapu tuatahi me te pehea te whakakorikori i te firmware ki runga.
Tuhinga o nga Wahanga
Ko nga waahanga matua o te poari e whakaahuahia ana ki te taha karaka.
| Wae Matua | Whakaahuatanga |
|
ESP32-C6-WROOM- 1 ranei ESP32-C6- WROOM-1U |
ESP32-C6-WROOM-1 me ESP32-C6-WROOM-1U he whanui-
kōwae kaupapa e tautoko ana i te Wi-Fi 6 i roto i te roopu 2.4 GHz, Nihokikorangi 5, me te IEEE 802.15.4 (Zigbee 3.0 me te Miro 1.3). He mea hanga huri noa i te maramara ESP32-C6, ka tae mai me te 8 MB SPI flash. Ko ESP32-C6- WROOM-1 e whakamahi ana i te antenna PCB i runga i te poari, engari ko ESP32-C6-WROOM- 1U te whakamahi i te hononga antenna o waho. Mo etahi atu korero, tirohia ESP32- C6-WROOM-1 Pepa Raraunga. |
|
Pane titi |
Ko nga titi GPIO katoa e waatea ana (haunga mo te pahi SPI mo te uira) ka pakaru ki nga pane pane i runga i te papa. |
| 5 V ki te 3.3 V LDO | Ko te kaiwhakahaere hiko e huri ana i te tuku 5 V ki te putanga 3.3 V. |
| 3.3 V Te hiko i runga LED | Ka huri ina hono te mana USB ki te papa. |
| USB-ki-UART
Piriti |
Ko te maramara piriti USB-ki-UART kotahi e whakarato ana i nga reiti whakawhiti ki te 3 Mbps. |
|
ESP32-C6 USB Tauranga Momo-C |
Ko te tauranga USB Momo-C i runga i te maramara ESP32-C6 e tika ana me te USB 2.0 tere tonu. Ka taea e ia ki te 12 Mbps te tere whakawhiti (Kia mahara kaore tenei tauranga e tautoko i te aratau whakawhiti tere tere 480 Mbps). Ka whakamahia tenei tauranga mo te tuku hiko ki te poari, mo nga tono uira ki te maramara, mo te whakawhitiwhiti korero me te maramara ma te whakamahi i nga tikanga USB, me te JTAG patuiro. |
|
Patene Whakaara |
Patene tango. Te pupuri Puta katahi ka pehi Tautuhi Anō ka timata i te aratau Download Firmware mo te tango i te firmware ma te tauranga rangatū. |
| Patene Tautuhi | Pēhia tēnei pātene hei tīmata anō i te pūnaha. |
|
USB Momo-C ki UART Tauranga |
Ka whakamahia mo te tuku hiko ki te poari, mo nga tono uira ki te maramara, me te korero ki te maramara ESP32-C6 ma te piriti USB-ki-UART i runga. |
| RGB LED | Ko te LED RGB ka taea te korero, i peia e GPIO8. |
|
J5 |
Ka whakamahia mo te ine o naianei. Tirohia nga korero mo te waahanga o nāianei Inenga. |
Tīmatahia te Whanaketanga Taupānga
I mua i te whakakaha i to ESP32-C6-DevKitC-1, me mohio kei te pai te ahua kaore he tohu o te kino.
Pūmārō e hiahiatia ana
Tatūnga Raupaparorohiko
Tena koa haere ki te ESP-IDF Tīmatahia, ka tere te awhina i a koe ki te whakarite i te taiao whakawhanaketanga katahi ka whakakorikoria he tono o muaampi runga i to papa.
Nga Ihirangi me te Whakapaipai
Nga ota hokohoko
Mena ka tono koe i etahi sampNa, ko ia ESP32-C6-DevKitC-1 ka tae mai i roto i te kete takitahi i roto i te peeke antistatic ranei i tetahi kete i runga i to kaihoko.
Mo nga ota hokohoko, tena koa haere ki https://www.espressif.com/en/company/contact/buy-a-sample.
Ota Rarawe
Mena ka tono nui koe, ka tae mai nga papa ki roto i nga pouaka kaata nui.
Mo nga ota rarawe, tirohia koa nga korero Whakataunga Hua Espressif (PDF)
Tohutoro taputapu
Hoahoa Poraka
Ko te hoahoa poraka i raro nei e whakaatu ana i nga waahanga o ESP32-C6-DevKitC-1 me o raatau hononga.
ESP32-C6-DevKitC-1 (pāwhiri ki te whakanui)
Kōwhiringa Tuku Hiko
E toru nga huarahi motuhake hei whakarato mana ki te poari:
- USB Momo-C ki te Tauranga UART me te Tauranga Momo-C ESP32-C6 USB (kotahi, e rua ranei), te tuku hiko taunoa (e taunakitia ana)
- 5V me GND pane titi
- 3V3 me nga pane titi GND
- Inenga o naianei
Ko nga pane J5 i runga i te ESP32-C6-DevKitC-1 (tirohia te J5 i te Whakaahua ESP32-C6-DevKitC-1 - mua) ka taea te whakamahi mo te ine i te waa i tuhia e te ESP32-C6-WROOM-1(U) kōwae:
- Inenga o naianei
- Tango i te pekepeke: Kua motuhia te tuku hiko i waenga i te kōwae me nga taputapu o te papa. Hei ine i te naianei o te kōwae, honoa te papa ki te ammeter mā ngā pane J5.
- Hoatu te pekepeke (taunoa wheketere): Whakahokia te mahinga o te poari.
Tuhipoka
Ina whakamahi i nga pane titi 3V3 me te GND hei whakakaha i te papa, tangohia koa te pekepeke J5, ka honoa he inemita i roto i te raupapa ki te ara iahiko o waho hei ine i te naianei o te kōwae.
Poraka Pane ℑ
Ko nga ripanga e rua i raro nei e whakaatu ana i te Ingoa me te Mahi o nga pane pane i nga taha e rua o te papa (J1 me J3). Ko nga ingoa pane pane e whakaatuhia ana i te Whakaahua ESP32-C6-DevKitC-1 - kei mua. He rite te tatau ki te ESP32-C6-DevKitC-1 Schematic (PDF).
J1ℑ
| Kao. | Ingoa | Momo 1 | Mahi |
| 1 | 3V3 | P | 3.3 V tuku hiko |
| 2 | RST | I | Teitei: ka taea te maramara; Iti: ka mono i te maramara. |
|
3 |
4 |
I/O/T |
MTMS 3, GPIO4, LP_GPIO4, LP_UART_RXD, ADC1_CH4, FSPIHD |
|
4 |
5 |
I/O/T |
MTDI 3, GPIO5, LP_GPIO5, LP_UART_TXD, ADC1_CH5, FSPIWP |
|
5 |
6 |
I/O/T |
MTCK, GPIO6, LP_GPIO6, LP_I2C_SDA, ADC1_CH6, FSPICLK |
| 6 | 7 | I/O/T | MTDO, GPIO7, LP_GPIO7, LP_I2C_SCL, FSPID |
|
7 |
0 |
I/O/T |
GPIO0, XTAL_32K_P, LP_GPIO0, LP_UART_DTRN, ADC1_CH0 |
|
8 |
1 |
I/O/T |
GPIO1, XTAL_32K_N, LP_GPIO1, LP_UART_DSRN, ADC1_CH1 |
| 9 | 8 | I/O/T | GPIO8 2 3 |
| 10 | 10 | I/O/T | GPIO10 |
| 11 | 11 | I/O/T | GPIO11 |
| 12 | 2 | I/O/T | GPIO2, LP_GPIO2, LP_UART_RTSN, ADC1_CH2, FSPIQ |
| 13 | 3 | I/O/T | GPIO3, LP_GPIO3, LP_UART_CTSN, ADC1_CH3 |
| 14 | 5V | P | 5 V tuku hiko |
| 15 | G | G | Papa whenua |
| 16 | NC | – | Karekau he hononga |
J3ℑ
| Kao. | Ingoa | Momo | Mahi |
| 1 | G | G | Papa whenua |
| 2 | TX | I/O/T | U0TXD, GPIO16, FSPICS0 |
| 3 | RX | I/O/T | U0RXD, GPIO17, FSPICS1 |
| 4 | 15 | I/O/T | GPIO15 3 |
| 5 | 23 | I/O/T | GPIO23, SDIO_DATA3 |
| 6 | 22 | I/O/T | GPIO22, SDIO_DATA2 |
| 7 | 21 | I/O/T | GPIO21, SDIO_DATA1, FSPICS5 |
| 8 | 20 | I/O/T | GPIO20, SDIO_DATA0, FSPICS4 |
| 9 | 19 | I/O/T | GPIO19, SDIO_CLK, FSPICS3 |
| 10 | 18 | I/O/T | GPIO18, SDIO_CMD, FSPICS2 |
| 11 | 9 | I/O/T | GPIO9 3 |
| 12 | G | G | Papa whenua |
| 13 | 13 | I/O/T | GPIO13, USB_D+ |
| 14 | 12 | I/O/T | GPIO12, USB_D- |
| 15 | G | G | Papa whenua |
| 16 | NC | – | Karekau he hononga |
- P: Tuku hiko; I: Whakauru; O: Putanga; T: Te aukati teitei.
- I whakamahia hei taraiwa i te RGB LED.
- (1,2,3,4,5) Ko MTMS, MTDI, GPIO8, GPIO9, me GPIO15 he titi o te maramara ESP32-C6. Ka whakamahia enei titi ki te whakahaere i te maha o nga mahi maramara i runga i te vol ruatagKo nga uara e pa ana ki nga titi i te wa o te hiko maramara, te tautuhi ano ranei i te punaha. Mo te whakamaarama me te tono mo nga titi whiri, tirohia te Pepa Raraunga ESP32-C6 > Wāhanga Tii Tiaki.
Tuhinga / Rauemi
 |
ESPRESSIF ESP32-C6-DevKitC-1 Poari Whakawhanaketanga [pdf] Aratohu Kaiwhakamahi ESP32-C6-DevKitC-1 Poari Whakawhanaketanga, ESP32-C6-DevKitC-1, Poari Whakawhanaketanga, Poari |