DO3000-C Rangatū Whakarewa Oxygen Controller
“
Whakatakotoranga
- Awhe Ine: [Whakauruhia te Awhe Ine]
- Wae Ine: [Whakauru Wae Ine]
- Whakatau: [Whakauru Whakatau]
- Hapa Taketake: [Kōkuhu Hapa Taketake]
- Awhe Pawera: [Kōkuhu Awhe Marama]
- Whakatau Pamahana: [Kōkuhu Whakatau Whakamahana]
- Hapa Taketake Paemahana: [Kōkuhu Hapa Paemahana Taketake]
- Pūmautanga: [Kōkuhu Pūmautanga]
- Putanga o nāianei: [Kōkuhu Putanga o nāianei]
- Putanga Whakawhitiwhiti: [Whakaurua te Putanga Whakawhitiwhiti]
- Ētahi atu Mahi: E toru nga Hoapā Relay Mana
- Tuku Hiko: [Whakauru Hiko Hiko]
- Nga Tikanga Mahi: [Whakauruhia nga Tikanga Mahi]
- Te Pamahana Mahi: [Whakauruhia te Waahi Mahi]
- Haumākū Pātahi: [Whakauruhia te Haumākū Pātahi]
- Whakatauranga parewai: [Whakauruhia te Whakatauranga Parewai]
- Taumaha: [Whakauru Taumaha]
- Ahu: [Kōkuhu Ahu]
Whakaahuatanga Hua
Ko te pūoko Oxygen Dissolved DO3000 e whakamahi ana i te rewharewha
hangarau tinei ki te huri i nga tohu whatu ki te hiko
tohu, e whakarato ana i nga panui kukū hāora pūmau me te a
hātepe hātepe 3D i whakawhanakehia e ia ake.
Ko te Kaiwhakahaere Oxygen Dissolved he wai e hangai ana ki te microprocessor
kounga taputapu mana aroturuki ipurangi whakamahia whānuitia i roto i ngā
nga tono penei i nga tipu maimoatanga wai inu, tohatoha
whatunga, puna kaukau, kaupapa maimoatanga wai, parapara
te maimoatanga, te whakakore i te wai, me nga tukanga ahumahi.
Tohutohu Tāuta
Tāutanga Tāmau
a) Ka mau ki roto i te kohao tuwhera
b) Whakatikahia te taputapu ma te whakamahi i nga tikanga kua whakaratohia
Tāutatanga Maunga Taiepa
a) Whakauruhia he awhi mo te taputapu
b) Whakaorangia te taputapu ma te whakamahi i te whakatikanga wiri pakitara
Tohutohu Waea
| tauranga | Whakaahuatanga |
|---|---|
| V+, V-, A1, B1 | Hongere Whakauru Mamati 1 |
| V+, V-, A2, B2 | Hongere Whakauru Mamati 2 |
| I1, G, I2 | Putanga o naianei |
| A3, B3 | RS485 Putanga Whakawhitiwhiti |
| G, TX, RX | RS232 Putanga Whakawhitiwhiti |
| P+, P- | He Koraha Tuuturu DC |
| T2+, T2- | Hononga Waea Temp |
| EC1, EC2, EC3, EC4 | Hononga Waea EC/RES |
| RLY3, RLY2, RLY1 | Rōpū 3 Rerere |
| L, N, | L- Waea Ora | N- Kuupapa | Papa whenua |
| REF1 | [Whakaahuatanga mo te tauranga REF1] |
Pātai Auau (FAQ)
Q: Me aha ahau ki te whakaatu te taputapu i te karere hapa?
A: Mena ka whakaatuhia e te taputapu he karere hapa, tirohia te kaiwhakamahi
pukapuka mo nga mahi rapurongoā. Mena kei te haere tonu te take, whakapaa atu
tautoko kiritaki mo te awhina.
P: E hia nga wa e tika ana kia whakatikahia te puoro?
A: Ko te pūoko kia whakatika rite ki te
nga taunakitanga a te kaiwhakanao, kua tohuhia ranei i roto i te pukapuka kaiwhakamahi.
Ko te whakatikatika i nga wa katoa ka whakarite i nga panui tika.
Q: Ka taea te whakamahi i tenei kaiwhakahaere ki nga taiao o waho?
A: Kua hangaia te kaiwhakahaere mo te whakamahinga o roto. A ape i te whakaatu
ki nga ahuatanga huarere kino, ki te ra tika ranei hei aukati
kino.
“`
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Tohu Panui Tere
Me ata panui te pukapuka a te kaiwhakamahi i mua i te tiimata ki te whakamahi i te waahanga. Ka whai mana te Kaihanga ki te whakatinana i nga huringa me te kore panui i mua.
24-0585 © Icon Process Controls Ltd.
1
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Nga korero haumaru
Whakakorehia te pehanga me te punaha hau i mua i te whakaurunga me te tango Whakapumautia te hototahitanga matū i mua i te whakamahi KAUA e neke ake i te teitei o te pāmahana, te pehanga ranei nga whakaritenga KAUPAPA KAUPAPA KAUPAPA KAUPAPA haumaru me te whakangungu kanohi i te wa o te whakauru me te ratonga KAUA e whakarereketia te hanga hua
Whakatupato | Tupato | mōrearea
He tohu morearea pea. Ko te kore e whai i nga whakatupato katoa ka pa mai pea te kino o nga taputapu, te kore ranei, te whara, te mate ranei.
Tuhipoka | Nga Panui Hangarau
Ka whakanui i nga korero taapiri, i nga tikanga taipitopito ranei.
Whakamahinga Whakamahinga
I te wa e whiwhi ana koe i te taputapu, me ata whakatuwhera te kete, tirohia mena kua pakaru nga taputapu me nga taputapu na te kawe waka me te mea kua oti nga taputapu. Mena ka kitea etahi ahuatanga kino, tena koa whakapiri mai ki ta maatau tari ratonga muri-hoko, te pokapū ratonga kaihoko a-rohe ranei, ka pupuri i te kete mo te whakahoki mai. Ko nga raraunga hangarau kua whakarārangihia i roto i te pepa raraunga o naianei e whai kiko ana, me whai. Mena kaore i te waatea te pepa raraunga, tono mai, tango mai ranei mai i ta maatau whaarangi (www.iconprocon.com).
Nga Kaimahi mo te Whakanoho, te Whakatau, me te Mahi
Ko tenei taputapu he inenga tātari me te taputapu whakahaere me te tino tika. Ko te tangata mohio anake, kua whakangungua, kua whakamanahia ranei me kawe te whakaurunga, te whakarite me te mahi o te taputapu. Me whakarite kei te wehe tinana te taura hiko mai i te tuku hiko ina hono ana, e whakatika ana ranei. Kia puta mai te raruraru haumaru, me mohio kua weto te hiko o te taputapu me te momotu. Mo te exampe, ka kore e haumaru ina puta nga ahuatanga e whai ake nei: 1. Ka kitea he kino ki te kaitirotiro 2. Karekau te kaitātari e mahi tika, ka whakarato ranei i nga inenga kua tohua. 3. Kua roa te kaitataritari e rongoa ana i roto i te waahi ka nui ake te pāmahana ki te 70 °C.
Me whakauru te kaitirotiro e nga tohunga i runga i nga whakaritenga o te rohe e tika ana, me nga tohutohu kei roto i te pukapuka mahi.
Kia rite ki nga whakaritenga hangarau me nga whakaritenga whakauru a te kaitirotiro.
Whakaahuatanga Hua
Ko te pukoro Oxygen Dissolved DO3000 e whakamahi ana i te hangarau tinei mura ki te huri i nga tohu whatu ki nga tohu hiko. Ka tukuna e ia nga panui kukū hāora pūmau me te hātepe hātepe 3D i whakawhanakehia e ia ake.
Ko te Kaiwhakahaere Oxygen Dissolved he taputapu whakahaere mo te aro turuki i te kounga wai i runga i te miihiniiti. Kei te whakamahia nuitia i roto i nga tipu maimoatanga wai inu, nga whatunga tohatoha wai inu, nga puna kaukau, nga kaupapa maimoatanga wai, te maimoatanga parakaingi, te wai whakakino wai me etahi atu tukanga ahumahi.
24-0585 © Icon Process Controls Ltd.
2
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Whakatakotoranga Hangarau
Te Awhe Ine Whakatau Waeine Ine Hapa Taketake Te Maamaa Te Maama Whakatau Te Maamaa Te Hapa Taketake Te Pumautanga o Naianei Putanga Whakawhitiwhiti Putanga Ētahi Atu Mahi E toru Hoapapa Mana Rere Te Hiko Mahinga Mahi Te Maama Mahi Paanga Maama Maama Waiwai Whakatauranga Taumaha Ahu Te Whakatuwhera Rahi Whakatuwhera Tikanga Whakataunga
0.005~20.00mg/L | 0.005~20.00ppm Korewharewha 0.001mg/L | 0.001ppm ±1% FS 14 ~ 302ºF | -10 ~ 150.0oC (Kei runga i te Pūoko) 0.1°C ±0.3°C pH: 0.01pH/24h; ORP: 1mV / 24h 2 roopu: 4-20mA RS485 MODBUS RTU Raraunga Raraunga & Whakaatu Anau 5A 250VAC, 5A 30VDC 9~36VDC | 85~265VAC | Whakamahi Hiko 3W Karekau he wawaotanga papa aukume kaha huri noa engari ko te papaaarangi 14 ~ 140oF | -10~60°C 90% IP65 0.8kg 144 x 114 x 118mm 138 x 138mm Paewhiri | Maunga Taiepa | Paipa
24-0585 © Icon Process Controls Ltd.
3
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Ahu
144mm
118mm
26mm
136mm
144mm
Rahi Taputapu M4x4 45x45mm
Rahi Puka Whakamuri 24-0585 © Icon Process Controls Ltd.
138mm +0.5mm Te Rahi Tapahi Whakapiri Whakapiri
4
138mm +0.5mm
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Tāutanga Tāmau
D+ DB2
LN
a) Kua mau ki roto i te kohao tuwhera b) Whakatikahia te taputapu
Rei A rei B rei C
Ahangahanga o te Whakaotitanga o te Whakataunga
Tāutatanga Maunga Taiepa
150.3mm 6×1.5mm
58.1mm
Ahangahanga o te Whakaotitanga o te Whakataunga
a) Whakanohoia he taiapa whakapuru mo te taputapu
Runga view o te whakapuru taiapa Kia tupato ki te ahunga whakaurunga
24-0585 © Icon Process Controls Ltd.
5
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Waea waea
REF2 INPUT2 TEMP2 TEMP2
GND CE RE WE
V+ V- A1 B1 V+ V- A2 B2 I1 G I2 A3 B3 G TX RX P+ P-
T2+ T2- EC1 EC2 EC3 EC4 RLY3 RLY2 RLY1 LN
SEN+ SENTEMP1 TEMP1 INPUT1 REF1
tauranga
Whakaahuatanga
V+, V-, A1, B1
Hongere Whakauru Mamati 1
V+, V-, A2, B2
Hongere Whakauru Mamati 2
I1, G, I2
Putanga o naianei
A3, B3
RS485 Putanga Whakawhitiwhiti
G, TX, RX
RS232 Putanga Whakawhitiwhiti
P+, P-
He Koraha Tuuturu DC
T2+, T2-
Hononga Waea Temp
EC1,EC2,EC3,EC4
Hononga Waea EC/RES
RLY3, RLY2, RLY1
Rōpū 3 Rerere
L,N,
L- Waea Ora | N- Kuupapa | Papa whenua
Kāpeka REF1
KOREUTU 1 TEMP 1 SEN-, SEN+ REF2 WHAKATOHU 2 TEMP 2
GND CE,RE,WE
Whakaahuatanga pH/Katote Tohutoro 1 pH/Katote Ine 1
Temp 2 Membrane DO/FCL
Tohutoro pH 2 Ine pH 2
Temp 2 Papa (mo te whakamatautau) Voltage mo FCL/CLO2/O3
Ko te hononga i waenga i te taputapu me te puoro: ko te tuku hiko, te tohu whakaputa, te whakapā whakaoho relay me te hononga i waenga i te pūoko me te taputapu kei roto katoa i roto i te taputapu, a ko te waea kei runga ake nei. Ko te roa o te arataki taura e mauhia ana e te hiko he 5-10 mita te tikanga, whakauruhia te raina me te tapanga e tika ana, te waea tae ranei ki runga i te pukoro ki te tauranga e rite ana ki roto o te taputapu ka whakakaha.
24-0585 © Icon Process Controls Ltd.
6
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Whakaahuatanga Paewhiri
2024-02-12 12:53:17
%
25.0 °C
Iri Whakawhiti Hiko
Aratau Tautuhinga Tahua: Patohia tenei ki te huri i nga whiringa tahua
Kua Whakaritea: Tirohia te Whakatau Whakatau Whakahoutanga: Patohia ano te "ENT".
Kōwhiringa Whakaū
Whakauruhia te Aratau Whakatau Whakatau Paerewa
Aratau Tautuhinga Tahua: Pēhia tēnei kī ki
huri i nga whiringa tahua
Whakauruhia te Aratau Tautuhinga Tahua | Inenga Whakahoki | Rua Aratau Whakawhiti
Hoki ki te Tahua o mua
I roto i te Aratau Ine, Patohia tenei paatene hei whakaatu i te Tūtohi Ia
? Perehi Poto: Ko te Perehi Poto ko te tuku i te ki i muri tonu i te pehi. (Taunoa ki nga perehi poto ki te kore e whakauruhia ki raro)
? Pehi Roa: Ko te Perehi Roa he pehi i te paatene mo te 3 hēkona ka tuku.
24-0585 © Icon Process Controls Ltd.
7
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Whakaaturanga Whakaaturanga
Ko nga hononga paipa katoa me nga hononga hiko me tirotiro i mua i te whakamahi. I muri i te whakakā o te hiko, ka whakaatu te mita e whai ake nei.
Uara Matua
Te Ra Tau | Marama | Ra
Wā Haora | Nga meneti | Hekona
He whakaoho ohorere o te Whakawhitiwhiti Hiko
Te Perentage hāngai ana ki te inenga Tuatahi
Rere 1 (Kua OTI te kahurangi, kua KAA te Whero)
Korekore te Oxygen Dissolved
Rere 2 (Kua OTI te kahurangi, kua KAA te Whero)
Momo taputapu
Rere 3 (Kua OTI te kahurangi, kua KAA te Whero)
Whakaatu 1 o naianei 2 Whakawhiti
Te horoi
Te pāmahana
Utu Whakamahana Aunoa
Aratau Ine
Aratau Whakatakoto
Korekore te Oxygen Dissolved
Aratau Whakatau
Whirihorahia te Pūnaha Rangitaki Raraunga Raraunga Whakataunga
Korekore te Oxygen Dissolved
Whakaatu Tūtohi ia
Te hau 8.25 mg/L
Te whakatikatika
Korekore te Oxygen Dissolved
24-0585 © Icon Process Controls Ltd.
Korekore te Oxygen Dissolved
8
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Tautuhinga Tahua
E whai ake nei te hanganga tahua o tenei taputapu
Waeine
mg/L %
Kapeneheihana 101.3
Whirihorahia te Whakatau
Pūoko
Te Whakatairanga Paerewa Paemahana
Whakatikangia āpure
Utu Tote
0
Kore Oxygen Voltage Utu
100mV
Waiwai Oxygen Voltage Utu
400mV
Whakataunga Hauora Utu
8.25
Pūoko pāmahana
Wehenga Wehenga Wehenga Waehe Waehe Waehenga Te Waahanga Waahi
Kore Whakatairitenga Whakataurangi
Whakatikatika
Whakaritenga Whakataunga Whanga Whetu Whakaritenga Whakapaipai
NTC2.252 k NTC10 k Pt 100 Pt 1000 0.0000 Manual Aunoa oC oF
Whakatika Wehewehenga 1 Whakatikatika Whakapae 2 Whakatika Wehewehenga 1 Whakatika Pounamu 2
24-0585 © Icon Process Controls Ltd.
9
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Pararau 1
Whakaoho
Pararau 2
Pararau 3
Putanga
Naianei 1 Naianei 2
24-0585 © Icon Process Controls Ltd.
State On-Off
I TE WAHI
Pūoho Teitei
Tauwhāitihia te Momo Whakaoho Haka
Maemaa
Tautuhinga Tepe
(Wā Tuwhera – Tuwheratanga)
Wā Tuwhera Tonu
takamuri
Ko te waahi i waenga i te whakatuwheratanga whakamutunga me te kati
(Wā Whakakore - I roto i te Kāwanatanga Whakapai) me te whakatuwheratanga e whai ake nei
State On-Off
I TE WAHI
Pūoho Teitei
Tauwhāitihia te Momo Whakaoho Haka
Maemaa
Tautuhinga Tepe
(Wā Tuwhera – Tuwheratanga)
Wā Tuwhera Tonu
takamuri
Ko te waahi i waenga i te whakatuwheratanga whakamutunga me te kati
(Wā Whakakore - I roto i te Kāwanatanga Whakapai) me te whakatuwheratanga e whai ake nei
State On-Off
I TE WAHI
Pūoho Teitei
Tauwhāitihia te Momo Whakaoho Haka
Maemaa
Tautuhinga Tepe
(Wā Tuwhera – Tuwheratanga)
Wā Tuwhera Tonu
takamuri
Ko te waahi i waenga i te whakatuwheratanga whakamutunga me te kati
(Wā Whakakore - I roto i te Kāwanatanga Whakapai) me te whakatuwheratanga e whai ake nei
Hongere
Te Mahana Matua
4-20mA
Kōwhiringa Huaputa
0-20mA
Tepe o runga Tepe Raro
Hongere
Kōwhiringa Huaputa
Tepe o runga Tepe Raro
20-4mA
Paemahana Matua 4-20mA 0-20mA 20-4mA
10
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Pūnaha Rangitaki Raraunga Huaputa
4800BPS
Reiti Baud
9600BPS
19200BPS
Karekau
RS485
Tirohanga Parity
He rerekee
Ahakoa
Kati Moka
1 Moka 2 Moka
Node Whatunga
001+
Wawa/Ira
Ia Whakairoiro (Tutohi Au)
1h/Ira 12h/Ira
Whakaatuhia kia rite ki nga tautuhinga waahi 480 tohu | mata
24h/Ira
Uiui Raraunga
Tau | Marama | Ra
7.5s
Tuhia te Waatea
90s
180s
Nga Korero Mahara
176932 Tohu
Putanga Raraunga
Reo
Hainamana Ingarihi
Rā | Te wa
Tau-Marama-Ra Haora-Minute-Tuarua
Iti
Whakaatu
Whakaatu Tere
Paerewa Waenga Teitei
Maama tuara
Tiaki Marama
Putanga Pūmanawa 1.9-1.0
Putanga Pūmanawa
Tautuhinga Kupuhipa 0000
Tau rangatū
Karekau he wheketere taunoa
Ae
24-0585 © Icon Process Controls Ltd.
11
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Pūnaha
Whakatere o Naianei
Whakamātautau Rere
Naianei 1 4mA Naianei 1 20mA Naianei 2 4mA Naianei 2 20mA
Rere 1 Rere Rere 2 Rere Rere 3
Ko nga pito pai me te kino o te ammeter ka hono ki te 1, 2 ranei o naianei putanga putanga o te taputapu, pehia te [] ki te whakatika i te naianei ki te 4 mA, ki te 20mA ranei, pehia te [ENT] ki te whakau.
Tīpakohia kia toru nga roopu relay ka rongo i te tangi o nga huringa e rua, he mea noa te rere.
Te whakatikatika
Pēhia te [MENU] ki te uru ki te aratau tautuhinga ka kowhiri i te whakatikatika
Whakatau Whakatau Paerewa
Whakatikangia āpure
Anaerobic Calibration Air Calibration
Whakaritenga Whakataunga Whanga Whetu Whakaritenga Whakapaipai
Whakatau Whakatau Paerewa
Pēhia te kī [ENT] ki te whakaū me te uru ki te aratau whakatika otinga paerewa. Mena kua whakatikatikahia te taputapu, ka whakaatu te mata i te mana whakatikatika. Pēhia anō te kī [ENT] ki te tāuru i te whakatikatika-anō mēnā ka hiahiatia.
Mena ka akiakihia koe e te kaitirotiro ki te whakauru i te kupuhipa haumaru whakatikatika, pehia te [ ] ranei [ ] ki te tautuhi i te kupuhipa haumaru whakatikatika, ka pehi i te [ENT] ki te whakaū i te kupuhipa haumaru whakatikatika.
Anaerobic Calibration
Whai muri i te urunga ki te aratau whakatikatika, ka whakaatu te taputapu penei i te ahua. Ka makahia te hiko DO ki te wai anaerobic kaore he potae whakamarumaru.
Ko te uara "tohu" e tika ana ka whakaatuhia ki te kokonga maui o runga o te mata. Ina u te uara "tohu", pehia te [ENT] ki te whakau.
I te wa o te whakatikatika, ka whakaatuhia e te taha matau o te mata te mana whakatikatika.
· Kua oti = i angitu te whakatikatika.
· Te whakatikatika = kei te haere tonu te whakatikatika.
· Hapa = i rahua te whakatikatika.
Ka oti te whakatikatika, pehia te [MENU] ki te hoki ki te tahua teitei.
Anaerobic 0 mg/L
Te whakatikatika
Korekore te Oxygen Dissolved
24-0585 © Icon Process Controls Ltd.
12
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Te Whakatairanga Air
Whai muri i te urunga ki te aratau whakatikatika, ka whakaatu te taputapu penei i te ahua. Whakanohoia te hiko DO ki te hau me te potae whakamarumaru.
Ko te uara "tohu" e tika ana ka whakaatuhia ki te kokonga maui o runga o te mata. Ina u te uara "tohu", pehia te [ENT] ki te whakau.
I te wa o te whakatikatika, ka whakaatuhia e te taha matau o te mata te mana whakatikatika.
· Kua oti = i angitu te whakatikatika.
· Te whakatikatika = kei te haere tonu te whakatikatika.
· Hapa = i rahua te whakatikatika.
Ka oti te whakatikatika, pehia te [MENU] ki te hoki ki te tahua teitei.
Te hau 8.25 mg/L
Te whakatikatika
Korekore te Oxygen Dissolved
Whakatikangia āpure
Tīpakohia nga tikanga whakatikatika i runga i te waahi: [Linear calibration], [Wikitika Whakatika], [Linear adjustment].
Te Whakatairanga Mara Ina whakaurua nga raraunga mai i te taiwhanga, taputapu kawe ranei ki tenei mea, ka whakatika aunoa te taputapu i nga raraunga.
Whakaritea Marae
Te whakatikatika
SP1
SP3
C1
Korekore te Oxygen Dissolved
Whakapumau Hua Whakatau: Ina he Kakariki te tohu "ENT", pehia [ENT] ki te whakau. Whakakore: Pēhia te kī [ ] hei nuku i te ata Kākāriki ki te ESC, ka pēhi i te [ENT] hei whakaū.
Whakatauritehia nga raraunga mai i te taputapu kawe me nga raraunga i inehia e te taputapu. Mena he hapa, ka taea te whakarereke i nga raraunga hapa e tenei mahi.
Whakatikatika Raina Ko nga uara raina i muri i te "whakatikanga mara" ka tiakina i tenei waahanga me te raraunga wheketere he 1.00.
24-0585 © Icon Process Controls Ltd.
13
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Ia Whakairoiro (Tutohi Au)
Rangitaki Raraunga
Uiui Ānau (Tutohi Au)
Wawa Uiui Raraunga
Wawa/Ira
1h/tohu
12h/tohu
24h/ira Tau/Marama/Ra
7.5s 90s 180s
400 nga tohu mo ia mata, e whakaatu ana i te kauwhata ia o nga raraunga hou e ai ki nga tautuhinga waahi
400 nga tohu mo ia mata, whakaatu te ia o nga ra 16 o nga ra raraunga
400 nga tohu mo ia mata, whakaatu te ia o nga ra 200 o nga ra raraunga
400 nga tohu mo ia mata, whakaatu te ia o nga ra 400 o nga ra raraunga
Tau/Marama/ra Wā: Minute: Waea Uara Tuarua
Rokiroki Raraunga Ia 7.5 Hekona
Rokiroki Raraunga Ia 90 Hekona
Rokiroki Raraunga Ia 180 Hekona
Pēhia te pātene [MENU] ka hoki ki te mata ine. Pēhia te pātene [ /TREND] i te aratau ine ki view tika te tūtohi ia o nga raraunga kua tiakina. E 480 nga huinga rekoata raraunga mo ia mata, a ka taea te kowhiri i te wa waahi o ia rekoata [7.5s, 90s, 180s), e rite ana ki nga raraunga e whakaatuhia ana i te [1h, 12h, 24h] mo ia mata.
Korekore te Oxygen Dissolved
I te aratau o naianei, pehia te [ENT] ki te neke i te raina whakaatu raraunga ki te taha maui me te taha matau (matomato) me te whakaatu i nga raraunga ki nga porowhita maui me te taha matau. Ma te pehi roa i te taviri [ENT] ka tere te neke. (I te wa e kakariki ana nga Ata o raro. Ko te [ENT] ko te ahunga nekehanga, pehia te [ /TREND] ki te huri i te ahunga o te nuku)
24-0585 © Icon Process Controls Ltd.
14
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
MODBUS RTU
Ko te tau putanga taputapu o tenei tuhinga ko V2.0; te tau putanga pūmanawa ko V5.9 me runga ake. Ko tenei tuhinga e whakaatu ana i te atanga MODBUS RTU i roto i nga korero me te ahanoa he kaiwhakatakoto rorohiko.
Hanganga Whakahau MODBUS
Whakaahuatanga whakatakotoranga raraunga i tenei tuhinga; Whakaaturanga rua, kumuri B, mo te example: 10001B – whakaaturanga ā-ira, karekau he prefix, kumuri ranei, mo te example: 256 Hexadecimal whakaaturanga, prefix 0x, mo example: 0x2A pūāhua ASCII ranei whakaatu aho ASCII, mo example: “YL0114010022″
Hanganga Whakahau Ko te kawa tono MODBUS e tautuhi ana i te Waehere Raraunga Kawa Maamaa (PDU), he mea motuhake mai i te paparanga korero o raro.
Waehere Mahi
Raraunga
Fig.1 : Waehere Raraunga Kawa MODBUS
Ko te mahere kawa MODBUS i runga i te pahi, i te kupenga motuhake ranei ka whakaatu etahi atu mara o nga wae raraunga kawa. Ko te kiritaki e timata ana i te whakawhiti MODBUS ka waihangahia te MODBUS PDU, katahi ka taapirihia te rohe hei whakatu i te PDU korero tika.
Wāhitau Wāhitau
MODBUS LINE RANGA PDU
Waehere Mahi
Raraunga
CRC
MODBUS PDU
Fig.2 : Hangahanga MODBUS mo te Whakawhitiwhiti Rangatū
I te raina rangatū MODBUS, kei roto i te rohe wāhitau te wāhitau taputapu taurekareka anake. Tohutohu: Ko te awhe wahitau taputapu ko 1…247 Tautuhia te wahitau taputapu o te taurekareka ki te mara wahitau o te anga tono ka tukuna e te kaihautu. Ka whakautu te taputapu taurekareka, ka tuuhia tana wahitau taputapu ki te waahi noho o te anga whakautu kia mohio ai te teihana matua ko wai te pononga e whakautu ana.
Ko nga waehere mahi e tohu ana i te momo mahi e mahia ana e te tūmau. Ko te rohe CRC te hua o te tataunga "tirohanga utu", ka mahia i runga i nga korero korero.
24-0585 © Icon Process Controls Ltd.
15
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
MODBUS RTU Aratau Whakawhiti
Ina whakamahi te taputapu i te aratau RTU (Waeine Kapeka Mamao) mo te whakawhitiwhiti korero rangatū MODBUS, kei ia paita moka-8 o nga korero e rua nga tohu hautekauono moka-4. Ko te advan matuatagKo enei o tenei aratau he nui ake te kiato ahua me te pai ake o te whakaputanga raraunga i te aratau ASCII he rite te reiti baud. Me tuku ia karere hei aho tonu.
Ko te whakatakotoranga o ia paita i roto i te aratau RTU (11 moka): Pūnaha whakawaehere: 8-bit-rua Kei ia paita 8-bit i roto i te karere e rua nga moka-4-bit hexadecimal (0-9, AF) Moka i ia paita: 1 moka timata
8 moka raraunga, ko nga moka iti whaimana tuatahi kaore he moka taki taurite 2 moka mutu Reeti Baud: 9600 BPS Me pehea te tuku i nga kiripuaki:
Ka tukuna ia pūāhua, paita rānei i tēnei raupapa (mai i te mauī ki te taha matau) te moka iti rawa (LSB)… Moka Hiranga Morahi (MSB)
Timata moka 1 2 3 4 5 6 7 8 Moka Kati Kati moka
Fig.3 : Raupapa Moka Tauira RTU
Tirohanga Hanganga Rohe: Tirohanga Huringa Hurihuri (CRC16) Whakaahuatanga Hanganga:
Taonga Taonga
Waehere Mahi
Raraunga
Wāhitau
1 paita
0…252 paita
Fig.4 : Hanganga Korero RTU
CRC 2 paita CRC Paita iti | CRC Paita teitei
Ko te rahi o te anga morahi o MODBUS he 256 paita MODBUS RTU Pouaka Korero I roto i te aratau RTU, ka wehewehea nga papa karere ma nga waahi mangere o te 3.5 wa iti rawa, e kiia ana ko te t3.5 i nga waahanga ka whai ake.
Tāpare 1
Tāpare 2
Tāpare 3
3.5 paita
Ka timata te 3.5 paita
3.5 paita
Waehere Mahi Wāhitau
8
8
3.5 paita
4.5 paita
Raraunga
CRC
nx8
16 moka
Fig.5 : Tapare Karere RTU
Whakamutua te 3.5 paita
Me tuku te anga karere katoa i roto i te roma pūāhua tonu. Ina neke ake i te 1.5 nga tohu te wa okioki i waenga i nga tohu e rua, ka kiia te anga korero kaore i oti, kaore hoki te kaiwhiwhi e whiwhi i te anga korero.
24-0585 © Icon Process Controls Ltd.
16
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Tāpare 1 noa
Tapare 2 he
<1.5 paita
> 1.5 paita
Fig.6 : MODBUS RTU CRC Tirohia
Kei roto i te aratau RTU he rohe rapu hapa i runga i te huringa huringa huringa (CRC) algorithm e mahi ana ki nga ihirangi karere katoa. Ka tirohia e te rohe CRC nga ihirangi o te katoa o te karere me te mahi i tenei haki ahakoa he tirotiro parea matapōkere te karere. Kei te rohe CRC he uara moka-16 e rua nga paita 8-bit. Ka whakamanahia te haki CRC16. Paita iti kei mua, paita teitei kei mua.
Te whakatinanatanga o MODBUS RTU i te Taputapu
E ai ki te whakamaaramatanga MODBUS mana, ka tiimata te whakahau me te 3.5 tohu tohu whakahau whakaoho, a ko te mutunga o te whakahau e tohuhia ana e te waahi 3.5 tohu. Ko te wahitau taputapu me te waehere mahi MODBUS he 8 nga moka. Kei roto i te aho raraunga nga moka n*8, kei roto i te aho raraunga te wahitau timatanga o te rehita me te maha o nga rehita panui/tuhi. Ko te tirotiro CRC he 16 moka.
Uara
Tīmata
Taumahi Wāhitau Pūrere
Raraunga
Karekau he paita Waitohu i te 3.5 Tohu
Paita
3.5
1-247 1
Waehere Mahi
Te whakaū ki MODBUS
Whakatakotoranga
Raraunga
Te whakaū ki MODBUS
Whakatakotoranga
1
N
Fig.7 : MODBUS whakamāramatanga o te Whakawhiti Raraunga
Taki Whakarāpopoto
Whakamutunga
Kore Paita Waitohu
CRCL CRCL
i roto i te 3.5
pūāhua
1
1
3.5
Taputapu MODBUS RTU Waehere Mahi
E rua noa nga waehere mahi MODBUS e whakamahia ana e te taputapu: 0x03: Rehita panui me te pupuri 0x10: Tuhia nga rehita maha
Waehere Mahi MODBUS 0x03: Rēhita Panui-a-pupuri Ka whakamahia tenei waehere mahi ki te panui i nga ihirangi poraka tonu o te rehita pupuri o te taputapu mamao. Tonoa te PDU ki te whakapūtā te wāhitau rēhita tīmata me te maha o ngā rehita. Rehita wāhitau mai i te kore. Nō reira, ko te rehita wāhitau 1-16 he 0-15. Ko nga raraunga rehita kei roto i nga korero whakautu ka kohia ki nga paita e rua mo ia rehita. Mo ia rehita, ko te paita tuatahi he moka teitei, ko te paita tuarua he moka iti. Tono:
Waehere Mahi
1 paita
0x03
Tīmata Wāhitau
2 paita
0x0000….0xfffff
Pānuihia te nama rehita
2 paita Fig.8 : Panui ka pupuri i te anga tono rehita
1…125
24-0585 © Icon Process Controls Ltd.
17
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Whakautu:
Waehere Mahi
1 paita
0x03
Te maha o nga paita
2 paita
0x0000….0xfffff
Pānuihia te nama rehita
2 paita
1…125
N = Tau Rehita
Whakaahua 9 : Panui me te pupuri i te anga whakautu rehita
Ko nga mea e whai ake nei e whakaatu ana i te anga tono me te anga whakautu me te rehita panui me te pupuri 108-110 hei tauira o mua.ample. (Ko nga ihirangi o te rehita 108 he panui-anake, me nga uara paita e rua o 0X022B, ko nga mea o roto o te rehita 109-110 ko 0X0000 me 0X0064)
Tāpare Tono
Pūnaha Tau
Waehere Mahi
Wāhitau Tīmata (Paita teitei)
Wāhitau Tīmata (Paita iti)
Te maha o nga rehita panui (paita teitei)
Te maha o nga rehita panui (paita iti)
(Hexadecimal) 0x03 0x00 0x6B 0x00
0x03
Tāpare Whakautu
Tatau Paita Waehere Tau Pūnaha Mahi
Rēhita Uara (Paita Teitei) (108)
(Hexadecimal) 0x03 0x06 0x02
Rēhita Uara (Paita Iti) (108)
0X2B
Rēhita Uara (Paita Teitei) (109)
Uara Rēhita (Paita Iti) (109) Uara Rēhita (Paita Teitei) (110) Uara Rēhita (Paita Iti) (110)
0x00
0x00 0x00 0x64
Whakaahua 10 : Exampte panui me te pupuri i nga tono rehita me nga papa whakautu
MODBUS Waehere Mahi 0x10 : Tuhia nga Rehita Maha
Ka whakamahia tenei waehere mahi ki te tuhi rehita haere tonu ki nga taputapu mamao (1… 123 rehita) poraka e tohu ana i te uara o nga rehita kua tuhia ki te anga raraunga tono. Ka kohia nga raraunga ki nga paita e rua mo ia rehita. Waehere mahi whakahoki anga whakautu, te waahi tiimata me te maha o nga rehita kua tuhia.
Tono:
Waehere Mahi
1 paita
0x10
Tīmata Wāhitau
2 paita
2 paita
Te maha o nga rehita whakauru
2 paita
2 paita
Te maha o nga paita
1 paita
1 paita
Rēhita Uara
N x 2 paita
N x 2 paita
Fig.11 : Tuhia nga Tapare Tono Rēhita Maha
*N = Tau Rehita
24-0585 © Icon Process Controls Ltd.
18
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Whakautu:
Waehere Mahi
1 paita
0x10
Tīmata Wāhitau
2 paita
0x0000….0xffff
Tau Rēhita
2 paita
1…123(0x7B)
N = Tau Rehita
Whakaahua 12 : Tuhia nga Tapare Whakautu Rehita Maha
Ko te anga tono me te anga whakautu e whakaatuhia ana i raro nei i roto i nga rehita e rua e tuhi ana i nga uara 0x000A me te 0x0102 ki te waahi timatanga o te 2.
Tāpare Tono
(Taekaha-ono)
Tāpare Whakautu
(Taekaha-ono)
Waehere Mahi Pūnaha Tau
Wāhitau Tīmata (Paita Teitei) Wāhitau Tīmata (Paita Iti) Tau Rēhita Tāuru (Paita Teitei) Tau Rēhita Whakauru (Paita Iti)
Te maha o nga paita Uara Rēhita (Paita teitei) Uara Rēhita (Paita iti) Uara Rēhita (Paita teitei) Uara Rēhita (Paita iti)
0x10 0x00 0x01 0x00 0x02 0x04 0x00 0x0A 0x01 0x02
Waehere Mahi Pūnaha Tau
Wāhitau Tīmata (Paita Teitei) Wāhitau Tīmata (Paita Iti) Tau Rēhita Tāuru (Paita Teitei) Tau Rēhita Whakauru (Paita Iti)
0x10 0x00 0x01 0x00 0x02
Whakaahua 13 : Exampte tuhi i nga tono rehita maha me nga papa whakautu
Hōputu Raraunga i te Taputapu
Wāhi Māngi Whakamāramatanga: Wāhi māngi, e rite ana ki te IEEE 754 (tika kotahi)
Whakaahuatanga
Tohu
Taurangi
Mantissa
Bit
31
30…23
22…0
Taurangi Wehenga
127
Whakaaturanga 14 : Whanga Maangi Whakamaramatanga Takitahi (4 paita, 2 Rēhita MODBUS)
TAMU 22…0
24-0585 © Icon Process Controls Ltd.
19
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Example: Whakahiato ira 17.625 ki te taurua Hipanga 1: Te huri i te 17.625 ki te ahua ira ki te tau maanu-ira i roto i te ahua-rua, ka kimi tuatahi i te tohu-rua o te wahanga tauoti 17decimal= 16 + 1 = 1×24 + 0×23 + 0× 22 + 0×21 + 1×20 Ko te tohu takirua o te wahanga tauoti 17 ko 10001B Katahi ka whiwhi te tohu-rua o te wahanga ira 0.625= 0.5 + 0.125 = 1×2-1 + 0×2-2 + 1×2-3 Ko te tohu takirua o te wahanga ira 0.625 he 0.101B. Na ko te tau ira maanu rua o te 17.625 i roto i te ahua ira ko te 10001.101B Hipanga 2: Hurihia kia kitea te taunga. Nukuhia te 10001.101B ki te taha maui kia kotahi noa te ira ira, ka puta ko te 1.0001101B, me te 10001.101B = 1.0001101 B× 24 . Na ko te wahanga taupū ko te 4, me te 127, ka huri hei 131, ko te tohu-rua ko te 10000011B. Hipanga 3: Tātaihia te tau hiku I muri i te tango i te 1 i mua i te ira ira o 1.0001101B, ko te tau whakamutunga ko 0001101B (na te mea me 1 i mua i te ira ira, no reira ko te tohu a IEEE ko te ira ira kei muri anake ka taea te tuhi). Mo te whakamarama nui o te moka-23 mantissa, ko te tuatahi (arā, he moka huna) kaore i te whakahiato. Ko nga paraka huna he paraka kei te taha maui o te kaiwehewehe, ka whakatauhia ki te 1 ka pehia. Hipanga 4: Te whakamāramatanga moka tohu Ko te moka tohu o te tau pai ko te 0, ko te moka tohu o te tau kino ko te 1, na ko te moka tohu o te 17.625 he 0. Hipanga 5: Hurihia ki te tohu moka moka 1 tohu moka + 8 moka taupū + 23-bit mantissa 0 10000011 00011010000000000000000B (te Hexadecimal system is shown as 0 x418d0000 ) Waehere Tohutoro: 1. Mena he mahi whare pukapuka te kaikohikohi e whakamahia ana e te kaiwhakamahi e whakatinana ana i tenei mahi, ka taea te karanga tika te mahi whare pukapuka, mo te exampMa te whakamahi i te reo C, katahi ka taea e koe te waea tika ki te mahi whare pukapuka C memcpy kia whiwhi tohu tauoti o te whakatakotoranga rokiroki ira-iti i roto i te mahara. Mo te example: float floatdata; // kua whakatahurihia te tau ira maanu korekore* outdata; memcpy (outdata, & floatdata, 4); Whakaaroa floatdata = 17.625 Mēnā he aratau rokiroki iti-mutunga, i muri i te mahi i te korero o runga ake nei, ko te raraunga kei te penapena i roto i te waahanga wahitau outdata he 0x00. Ko Outdata + 1 ka penapena raraunga hei 0x00 waeine wahitau (outdata + 2) ka penapena raraunga hei 0x8D waeine wahitau (outdata + 3) ka penapena raraunga hei 0x41 Mena he aratau rokiroki nui-mutunga, i muri i te mahi i te korero i runga ake nei, ko nga raraunga ka penapena ki waho o te Ko te wae wāhitau he 0x41 wae wāhitau (outdata + 1) rokiroki raraunga hei 0x8D wae wāhitau (outdata + 2) rokiroki raraunga hei 0x00 wae wāhitau (outdata + 3) rokiroki raraunga rite 0x00 2. Ki te kore e te kaitoi e whakamahia ana e te kaiwhakamahi te mahi whare pukapuka o tenei mahi, ka taea te whakamahi i nga mahi e whai ake nei hei whakatutuki i tenei mahi:
24-0585 © Icon Process Controls Ltd.
20
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
void memcpy(kore *dest,kore *src,int n) {
char *pd = (char *)destin; char *ps = (char *)src;
mo(int i=0;i
Na ka waea atu ki te memcpy i runga ake nei(outdata,&floatdata,4);
Example: Whakahiatohia te tau maanu-rua 0100 0010 0111 1011 0110 0110 0110 10B ki te tau ā-ira
Wāhanga 1: Wehea te tau ira mānu ā-rua 0100 0010 0111 1011 0110 0110 0110B ki te moka tohu, moka taupū me te moka mantissa.
0 10000100
11110110110011001100110B
Moka-1 tohu + moka-8 taupū + moka-23 moka tohu hiku S: 0 e tohu ana i te tau pai Te turanga tohu E: 10000100B =1×27+0×26+0×25+0×24 + 0 × 23+1× 22+0×21+0×20 =128+0+0+0+0+4+0+0=132
Moka Mantissa M: 11110110110011001100110B =8087142
Hipanga 2: Tātaihia te tau ā-ira
D = (-1)×(1.0 + M/223)×2E-127
= (-1)0×(1.0 + 8087142/223)×2132-127 = 1×1.964062452316284×32
= 62.85
Waehere Tohutoro:
floatTOdecimal(roa int byte0, long int byte1, long int byte2, long int byte3) {
long int realbyte0,realbyte1,realbyte2,realbyte3; tohu S;
roa int E,M;
mānu D; realbyte0 = paita3; realbyte1 = paita2; realbyte2 = paita1; realbyte3 = paita0;
if((realbyte0&0x80)==0) {
S = 0;//tau pai }
atu
{
S = 1;//tau tōraro }
E = ((realbyte0<<1)|(realbyte1&0x80)>>7)-127;
M = ((realbyte1&0x7f) << 16) | (realbyte2<< 8)| realbyte3;
D = pow(-1,S)*(1.0 + M/pow(2,23))* pow(2,E);
hoki D; }
Whakaahuatanga mahi: tawhā byte0, byte1, byte2, byte3 e tohu ana i te 4 paita o te tau ira maanu rua.
Ko te tau ira i hurihia mai i te uara whakahoki.
Mo te exampNa, ka tukuna e te kaiwhakamahi te whakahau ki te tiki i te uara pāmahana me te uara hāora rewa ki te tirotiro. Ko nga paita 4 e tohu ana i te uara pāmahana i roto i te anga whakautu kua riro ko 0x00, 0x00, 0x8d me te 0x41. Na ka taea e te kaiwhakamahi te tau ira o te uara pāmahana e tika ana ma te korero waea e whai ake nei.
Ko te pāmahana = 17.625.
Te pāmahana maru = floatTOdecimal( 0x00, 0x00, 0x8d, 0x41)
24-0585 © Icon Process Controls Ltd.
21
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Pānuihia te Aratau Tohutohu
Ko te kawa whakawhitiwhiti ka mau i te kawa MODBUS (RTU). Ko te ihirangi me te wahitau o te korero ka taea te whakarereke i runga i nga hiahia o nga kaihoko. Ko te whirihoranga taunoa ko te wahitau whatunga 01, reeti baud 9600, ara tirohia, kotahi mutu moka, ka taea e nga kaiwhakamahi te whakarite i o raatau ake huringa; Waehere Taumahi 0x04: Ma tenei mahi ka taea e te kaihautu te tiki inenga-waahi mai i nga taurekareka, kua tohua hei momo ira maanu-kotahi (arā e noho ana i nga wahitau rehita e rua), me te tohu i nga tawhā e rite ana ki nga wahitau rehita rereke. Ko te wahitau korero e whai ake nei:
0000-0001: Uara pāmahana | 0002-0003: Uara Ine Matua | 0004-0005: Te Mahana me te Voltage Uara |
0006-0007: Main Voltage Uara Whakawhitiwhiti exampte: Exampte iti o te waehere mahi 04 tohutohu: Wāhitau Whakawhitiwhiti = 1, te pāmahana = 20.0, te uara katote = 10.0, te pāmahana voltage = 100.0, katote voltage = 200.0 Kaihautū Tukua: 01 04 00 00 08 F1 CC | Whakautu Taurekareka: 01 04 10 00 41 A0 00 41 20 00 42 C8 00 43 48 81 E8 Tuhipoka: [01] E tohu ana i te wahitau korero taputapu; [04] He tohu mahi 04; [10] tohu 10H (16) raraunga paita; [00 00 00 41 A0] = 20.0; / uara pāmahana [00 00 4120]= 10.0; // Uara Ine Matua [00 00 42 C8] = 100.0; // Te pāmahana me te Voltage Uara [00 00 43 48] = 200.0; // Main ine voltage uara [81 E8] tohu CRC16 waehere taki;
Ripanga Hauora Hauora i raro i nga Pawera rereke
°F | °C
mg/L
°F | °C
mg/L
°F | °C
mg/L
32 | 0
14.64
57 | 14
10.30
82 | 28
7.82
34 | 1
14.22
59 | 15
10.08
84 | 29
7.69
34 | 2
13.82
61 | 16
9.86
86 | 30
7.56
37 | 3
13.44
62 | 17
9.64
88 | 31
7.46
39 | 4
13.09
64 | 18
9.46
89 | 32
7.30
41 | 5
12.74
66 | 19
9.27
91 | 33
7.18
43 | 6
12.42
68 | 20
9.08
93 | 34
7.07
44 | 7
12.11
70 | 21
8.90
95 | 35
6.95
46 | 8
11.81
71 | 22
8.73
97 | 36
6.84
48 | 9
11.53
73 | 23
8.57
98 | 37
6.73
50 | 10
11.26
75 | 24
8.41
100 | 38
6.63
52 | 11
11.01
77 | 25
8.25
102 | 39
6.53
53 | 12 55 | 13
10.77 10.53
79 | 26 80 | 27
8.11 7.96
Kia mahara: no te taapiri C o JJG291 – 1999 tenei ripanga.
Ko te ihirangi hāora memeha ka taea te tatau i nga pehanga hau rereke penei e whai ake nei.
A3=
PA·101.325
I roto i te tātai I roto i te tātai: As– Solubility o te pehanga hau i P(Pa); A– Wairewa i te pehanga hau o te 101.325(Pa);
P– pehanga, Pa.
24-0585 © Icon Process Controls Ltd.
22
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Te tiaki
E ai ki nga whakaritenga o te whakamahi, he tino uaua te tuunga whakaurunga me te ahuatanga mahi o te taputapu. Kia pai ai te mahi o te taputapu, me mahi tonu nga kaimahi tiaki i te taputapu. Tena koa whakarongo ki nga take e whai ake nei i te wa e tiaki ana:
Tirohia te taiao mahi o te taputapu. Mena ka nui ake te pāmahana i te awhe kua tohua o te taputapu, me mahi tika; ki te kore, ka pakaru te taputapu, ka heke ranei tona oranga mahi;
A, no te horoi i te anga kirihou o te taputapu, whakamahia he kakahu maeneene me te horoi ngawari hei horoi i te anga. Tirohia mēnā he mārō te waea o te kāpeka o te taputapu. Kia tupato ki te momotu i te hiko AC, DC ranei
i mua i te tango i te uhi waea.
Tautuhi Paanui
Whakaahuatanga Hua
Te nui
1) T6046 Fluorescence Online Dissolved Oxygen Meter
1
2) Nga Taonga Whakauru Taputapu
1
3) Mahinga Mahi
1
4) Tiwhikete Tohu
1
Tuhipoka: Tena tirohia te huinga taputapu katoa i mua i te whakamahi.
Ko etahi atu raupapa taputapu tātari a te kamupene, tena koa takiuru mai ki ta maatau webpae mo nga uiui.
24-0585 © Icon Process Controls Ltd.
23
ProCon® — Raupapa DO3000-C
Kaiwhakahaere Hauora Whakarewa
Pūtāhui, Whakahoki me te here
Pūtāhui
Ka whakamanahia e Icon Process Controls Ltd ki te kaihoko taketake o ana hua ka kore he kino o nga taonga me nga mahi i raro i te whakamahinga me te ratonga i runga i nga tohutohu i tukuna e Icon Process Controls Ltd mo te wa kotahi tau mai i te ra o te hoko o aua hua. Ko te herenga a Icon Process Controls Ltd i raro i tenei whakamana, he iti noa iho ki te whakatikatika, ki te whakakapi ranei, i te whiringa Icon Process Controls Ltd, o nga hua, waahanga ranei, ka whakatauhia e te tirotiro a Icon Process Controls Ltd ki tona pai ki te he o nga rawa, i nga mahi ranei i roto. te wā pūtāhui. Me whakamohiotia a Icon Process Controls Ltd i runga i nga tohutohu kei raro iho nei mo tetahi kereme i raro i tenei whakamana i roto i nga ra e toru tekau (30) i muri i te kereme kore o te rite o te hua. Ko nga hua kua whakatikahia i raro i tenei raihana ka whakamanahia mo te toenga o te waa whakamana tuatahi. Ko nga hua ka tukuna hei whakakapinga i raro i tenei raihana ka whakamanahia mo te tau kotahi mai i te ra o te whakakapinga.
Ka hoki mai
Kaore e taea te whakahoki mai nga hua ki te Icon Process Controls Ltd me te kore whakamana i mua. Ki te whakahoki i tetahi hua e kiia ana he hapa, haere ki www.iconprocon.com, ka tuku mai he puka tono whakahoki mai a te kaihoko (MRA) ka whai i nga tohutohu kei roto. Ko nga hua whakamana me nga hua kore-purangi ka hoki mai ki Icon Process Controls Ltd me utu tomua me te inihua. Ko te Icon Process Controls Ltd kare he kawenga mo nga hua kua ngaro, kua pakaru ranei i te tuku.
Nga herenga
Kaore tenei raihana e pa ki nga hua e: 1. kei tua atu i te waa whakamana, he hua ranei kaore te kaihoko tuatahi e whai i nga tikanga whakamana.
kua tuhia ki runga ake nei; 2. kua pa ki te kino o te hiko, te miihini, te matū ranei na te kino o te whakamahi, ohorere, koretake ranei; 3. kua whakarereketia, kua whakarereketia ranei; 4. ko tetahi atu i nga kaimahi ratonga kua whakamanahia e Icon Process Controls Ltd kua ngana ki te whakatika; 5. kua uru ki roto i nga aitua, i nga aitua taiao ranei; 6. kua pakaru ranei i te wa e hoki mai ana ki te Icon Process Controls Ltd
Kei a Icon Process Controls Ltd te mana ki te whakakore takitahi i tenei raihana me te tuku i nga hua kua whakahokia ki a Icon Process Controls Ltd kei reira: 1. he taunakitanga kei te taha o te hua he mea morearea; 2. kua noho tonu ranei te hua kaore i keremehia i Icon Process Controls Ltd mo te neke atu i te 30 ra i muri i te Icon Process Controls Ltd
kua tono tika kia tukuna.
Kei roto i tenei raihana te raihana korero kotahi i mahia e Icon Process Controls Ltd e pa ana ki ana hua. KATOA WHAKAMAHI KAUPAPA, KAUPAPA KAUPAPA KAUPAPA, KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA. Ko nga rongoa mo te whakatikatika, whakakapi ranei pera i nga korero i runga ake nei ko nga rongoatanga motuhake mo te takahi i tenei raihana. KAUA E KAUPAPA Icon Process Controls Ltd TE WHAKAMAHI MO TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE TANGATA. KO TE WHAKAMAHI KI TE WHAKAMAHI I TE WHAKAMUTUNGA, KAOTI, KAUPAPA KAUPAPA, KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAORE TANGATA E WHAKAMAHIA KI TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE ICON Process Controls Ltd. Ka whakamaoritia tenei raihana i runga i nga ture o te kawanatanga o Ontario, Canada.
Mena ka mau tetahi wahanga o tenei raihana kua muhu, e kore ranei e taea te whakamana mo tetahi take, kaore taua kitenga e whakakore i etahi atu waahanga o tenei raihana.
Mo etahi atu tuhinga hua me te tautoko hangarau tirohia:
www.iconprocon.com | ī-mēra: sales@iconprocon.com support@iconprocon.com ranei | Ph: 905.469.9283
24-0585 © Icon Process Controls Ltd.
24
Tuhinga / Rauemi
 |
Nga Mana Tukatuka ICON DO3000-C Series Dissolved Oxygen Controller [pdf] Aratohu Kaiwhakamahi Ko te raupapa DO3000-C te Kaiwhakahaere Oxygen Dissolved, te Raupapa DO3000-C, te Kaiwhakahaere Oxygen Dissolved, te Kaiwhakahaere Oxygen, te Kaiwhakahaere |
