Whakahaere Tukatuka ICON TI3B Raupapa Whakauru Hoe Wira Rere Meter Sensor
Nga Tohutohu Whakamahi Hua
I mua i te whakaurunga, te tangohanga ranei, me whakarite kia whakakorehia te pehanga me te tuku i te punaha. Whakaaetia te hototahi matū i mua i te whakamahi. Kaua e neke ake i te pāmahana teitei, te pehanga ranei. Whakamaua i nga wa katoa he kauti haumaru, he parepare kanohi ranei i te wa e whakauru ana me te ratonga. Kaua e whakarereketia te hanga hua.
Tāutatanga
- Whakahinuhinu O-mowhiti ki te hinu whakahinuhinu whakahinuhinu hototahi.
- Kia ata whakahekehia te pūoko ki roto i te taputapu ma te whakamahi i te nekehanga hurihuri, hurihuri ranei. Kaua e kaha.
- Me whakarite he whakarara te ripa, kakari ranei o te pukoro ki te ahunga rere.
- Whakapaia te potae puoro me te kore e whakamahi taputapu hei aukati i te kino o nga miro.
- Whakahinuhinu te roto o te whakauru whakauru ki te silicone.
Nga korero haumaru
- Whakamutua te pehanga me te punaha hau i mua i te whakaurunga, te tango ranei
- Whakapumautia te hototahitanga matū i mua i te whakamahi
- KAUA e neke ake i te pāmahana teitei, te pehanga ranei
- Kia mau i nga wa katoa he kauti haumaru me te whakangungu kanohi i te wa o te whakaurunga me te ratonga
- KAUA e whakarereketia te hanga hua
Whakatupato | Tupato | mōrearea
He tohu morearea pea. Ki te kore e whai i nga whakatupato katoa ka pa mai pea te kino o nga taputapu, te whara, te mate ranei.
Tuhipoka | Nga Panui Hangarau
Ka whakanui i nga korero taapiri, i nga tikanga taipitopito ranei.
Ringa Whakaiti anake
Ki runga ake i te whakamaatanga ka pakaru tonu nga miro o nga hua me te kore o te nati pupuri.
Kaua e Whakamahi Utauta
Ko te whakamahi i nga taputapu ka kino pea ka mahia i tua atu i te whakatikatika me te whakakore i te raihana hua.
Taputapu Tiaki Whaiaro (PPE)
Whakamahia i nga wa katoa te PPE e tika ana i te wa e whakauru ana me te ratonga o nga hua Truflo®.
Whakatupato Pūnaha Whakanuia
Kei raro pea te pūoko i te pehanga. Kia tupato ki te punaha hau i mua i te whakaurunga, te tango ranei. Ki te kore e pera, ka pakaru pea nga taputapu me te whara kino/ranei.
Whakaatuhia nga ahuatanga
Whakatakotoranga Hangarau
| Whānui | ||
| Awhe Mahi | 0.3 ki te 33 ft/s | 0.1 ki te 10 m/s |
| Awhe Rahi Paipa | ½ ki te 24″ | DN15 ki DN600 |
| Whanui | ±0.5% o FS @ 25°C | 77°F | |
| Te tukurua | ±0.5% o FS @ 25°C | 77°F | |
| Rauemi Makuku | ||
| Te Tinana Puoro | PVC (Pouri) | PP (Pigmented) | PVDF (Natura) | 316SS | |
| O-Mowhiti | FKM | EPDM* | FFKM* | |
| Rotor Pin | Ngaherehere | Zirconium Ceramic | ZrO2 | |
| hoe | Rotoru | ETFE Tefzel® | |
| Hiko | ||
| Pūhiko | 5000 | 9000 mah | |
| Whakaatu | ||
| LCD | Rere Rere + Rere Totalizer | ||
| Max. Te Whakatauranga Pawera/Pēhanga – Pūoko Paerewa me te Whakauru | Huri-kore | ||
| PVC | 180 Psi @ 68°F | 40 Psi @ 140°F | 12.5 Pae @ 20°C | 2.7 Pae @ 60°F |
| PP | 180 Psi @ 68°F | 40 Psi @ 190°F | 12.5 Pae @ 20°C | 2.7 Pae @ 88°F |
| PVDF | 200 Psi @ 68°F | 40 Psi @ 240°F | 14 Pae @ 20°C | 2.7 Pae @ 115°F |
| 316SS | 200 Psi @ 180°F | 40 Psi @ 300°F | 14 Pae @ 82°C | 2.7 Pae @ 148°F |
| Te Waahi Mahi | ||
| PVC | 32°F ki te 140°F | 0°C ki te 60°C |
| PP | -4°F ki te 190°F | -20°C ki te 88°C |
| PVDF | -40°F ki te 240°F | -40°C ki te 115°C |
| 316SS | -40°F ki te 300°F | -40°C ki te 148°C |
| Nga Paerewa me nga Whakaaetanga | ||
| CE | FCC | RoHS Ture | ||
Tirohia nga Kauwhata Pawera me te Peehanga mo etahi atu korero
Whakaahuatanga Hua
Ko te TI Series whakaurunga kirihou hoe i te mita rere wira kua hangaia hei whakarato i te ine rerenga tika mo te wa roa i roto i nga tono ahumahi uaua. Kei roto i te hui wira hoe he hoe Tefzel® me te zirconium ceramic rotor pin me nga bushings. Ko nga rauemi Tefzel® me te Zirconium tino mahi kua tohua na te pai o o raatau matū me nga taonga whakakakahu.
Ngā āhuatanga
- ½” – 24” Raina Raina
- Rere Rere | Tapeke
Hoahoa Hou ShearPro®
- Kōtaha Rere Hururangi
- Pokarekare Whakahekea = Whakanuia te Roa
- 78% He iti ake te Toia i te Hoahoa Hoe Papatahi Tawhito*
*Ref: NASA "Whakaahua Hanga ki te Toia"
360º Hoahoa Rotor Parekura
- Ka whakakore i te horahanga maihao
- Kore Nga Hoe Ngaro
Tāutatanga
Tino Hiranga
- Whakahinuhinu O-mowhiti ki te whakahinuhinu viscous, hototahi ki nga rauemi o te hanga.
- Ma te whakamahi i te | korikori nekehanga, āta whakahekehia te pūoko ki roto i te whakaurunga. | Kaua e Whakahau | Fig-3
- Whakaritea te ripa | he whakarara te kakari ki te ahunga rere | Fig-4
Ringihia te potae pūoko. KAUA e whakamahi taputapu i runga i te potae puoro, ka pakaru ranei nga miro potae me nga miro whakauru. | Fig-5 
Te Turanga Pūoko Tika
- Kimihia te ripa tūnga mita rere me te clamp kakari nohoanga.
- Whakauruhia tetahi miro o te potae pūoko, ka huri i te pūoko kia noho te ripa tīaroaro ki roto i te kakari whakauru. Me whakarite he whakarara te ripa ki te ahunga rere.
- Ringihia te potae tīwiri.
- KAUA e whakamahi taputapu - ka pakaru pea nga miro.
- Me whakarite kia mau tonu te mita.
Tika te Tatūnga Turanga Pūoko
Ko nga mita rere o te raupapa TI e ine ana i nga purongo wai anake. Kaua he mirumiru hau, me noho tonu te paipa kia ki tonu. Kia tika ai te inenga rere, me u tonu te whakanohonga o nga mita rere ki nga tawhā motuhake. Me whai paipa rere torotika me te iti rawa o nga diameter paipa te tawhiti ki runga me raro o te pukoro rere.
Te % teitei o te totoka: 10% me te rahi matūriki kaua e neke atu i te 0.5mm te waahanga whiti, te roa ranei
Whakapaipai me te K-Factor
| WHAKAMAHI TEE | ||||
 |
||||
| Tee Whakauru | K-Factor |
Pūoko Roa |
||
| IN | DN | LPM | GPM | |
| ½” (V1) | 15 | 156.1 | 593.0 | S |
| ½” (V2) | 15 | 267.6 | 1013.0 | S |
| ¾” | 20 | 160.0 | 604.0 | S |
| 1″ | 25 | 108.0 | 408.0 | S |
| 1½” | 40 | 37.0 | 140.0 | S |
| 2″ | 50 | 21.6 | 81.7 | S |
| 2½” | 65 | 14.4 | 54.4 | S |
| 3″ | 80 | 9.3 | 35.0 | S |
| 4″ | 100 | 5.2 | 19.8 | S |
| CLAMP-I RUNGA SADDLES | ||||
 |
||||
| Clamp Potae | K-Factor |
Pūoko Roa |
||
| IN | DN | LPM | GPM | |
| 2″ | 50 | 21.6 | 81.7 | S |
| 3″ | 80 | 9.3 | 35.0 | S |
| 4″ | 100 | 5.2 | 19.8 | S |
| 6″ | 150 | 2.4 | 9.2 | L |
| 8″ | 200 | 1.4 | 5.2 | L |
| CPVC SOCKET WELD-ON ADAPTER | ||||
 |
||||
| Weld On
Whāurutau |
K-Factor |
Pūoko Roa |
||
| IN | DN | LPM | GPM | |
| 2″ | 50 | 14.4 | 54.4 | S |
| 2½” | 65 | 9.3 | 35.5 | S |
| 3″ | 80 | 9.3 | 35.0 | S |
| 4″ | 100 | 5.2 | 19.8 | S |
| 6″ | 150 | 2.4 | 9.2 | L |
| 8″ | 200 | 1.4 | 5.2 | L |
| 10″ | 250 | 0.91 | 3.4 | L |
| 12″ | 300 | 0.65 | 2.5 | L |
| 14″ | 400 | 0.5 | 1.8 | L |
| 16″ | 500 | 0.4 | 1.4 | L |
| 18″ | 600 | 0.3 | 1.1 | L |
| 20″ | 800 | 0.23 | 0.9 | L |
| 24″ | 1000 | 0.16 | 0.6 | L |
Te Taumaha vs. Te Taumata
Rere Rere Min/Max
| Rahi Paipa (OD) | LPM | GPM | LPM | GPM |
| 0.3m/s min. | 10m/s mōrahi | |
| ½” | DN15 | 3.5 | 1.0 | 120.0 | 32.0 |
| ¾” | DN20 | 5.0 | 1.5 | 170.0 | 45.0 |
| 1″ | DN25 | 9.0 | 2.5 | 300.0 | 79.0 |
| 1 ½” | DN40 | 25.0 | 6.5 | 850.0 | 225.0 |
| 2″ | DN50 | 40.0 | 10.5 | 1350.0 | 357.0 |
| 2 ½” | DN60 | 60.0 | 16.0 | 1850.0 | 357.0 |
| 3″ | DN80 | 90.0 | 24.0 | 2800.0 | 739.0 |
| 4″ | DN100 | 125.0 | 33.0 | 4350.0 | 1149.0 |
| 6″ | DN150 | 230.0 | 60.0 | 7590.0 | 1997.0 |
| 8″ | DN200 | 315.0 | 82.0 | 10395.0 | 2735.0 |
Kōwhiringa Waehe
Papatonotanga
Rere Tapeke - Whakaatu Maama Katoa
I roto i te Aratau Tapeke (GAL, LTR, KL)
- Puritia te
kī mō te 3 hēkona hei whakaatu i te uara o nāianei o ngā mati 7 – 8 - After releasing te kī te uara o nāianei o te mati 1 – 6 ka whakaatuhia
Rere Totalizer Tautuhi
Tautuhinga Whakaoho Ataata
Tohu Tūnga Pūhiko
| Voltage o Pūhiko | Tohu | Tūnga |
| 3.0V |  |
Tauine Katoa |
| <3.0V |  |
Tauine ngawari |
| <2.8V |  |
Tauine Iti (Pilot BAT) |
| <2.6V |  |
Vol Rawatage (Pilot BAT & Whakaaturanga Anarama) |
Tautuhinga Moe
Ahu (mm)
Rotor Pin | Whakakapi Hoe
Whakakapinga Pūhiko
Kōwhiringa Tauira
| PVC | PP | PVDF | ||
| Rahi | Nama Wahi | Rauemi |
| ½” – 4″ | TIB-PS | PVC |
| 6″ – 24″ | TIB-PL | PVC |
| 1″ – 4″ | TIB-PP-S | PP |
| 6″ – 24″ | TIB-PP-L | PP |
| 1″ – 4″ | TIB-PF-S | PVDF |
| 6″ – 24″ | TIB-PF-L | PVDF |
| 316 SS | ||
| Rahi | Nama Wahi | Rauemi |
| ½” – 4″ | TI3B-SS-S | 316 SS |
| 6″ – 24″ | TI3B-SS-L | 316 SS |
- Tāpiri Humuri –
- 'E' – Hiri EPDM
Taputapu Tāuta
SA
Clamp-I runga i nga Whakanohonohonoho
- Rauemi PVC
- Viton® O-Mowhiti
- Kei te waatea i te Metric DIN
- Ka Whakaaetia te Tohu Rere Momo Momo Signet®
| PVC | |
| Rahi | Nama Wahi |
| 2″ | SA020 |
| 3″ | SA030 |
| 4″ | SA040 |
| 6″ | SA060 |
| 8″ | SA080 |
PT | PPT | PFT
Taputapu Tāuta
- PVC | PP | PVDF
- Hononga Whakamutunga turanga
- Ka Whakaaetia te Tohu Rere Momo Momo Signet®
- Hoahoa Uniana Pono
| PVDF | PVC | PP | |
| Rahi | Nama Wahi | Nama Wahi | Nama Wahi |
| ½ ” | PFT005 | PT005 | PPT005 |
| ¾” | PFT007 | PT007 | PPT007 |
| 1” | PFT010 | PT010 | PPT010 |
| 1½” | PFT015 | PT015 | PPT015 |
| 2” | PFT020 | PT020 | PPT020 |
Tāpiri Humuri –
- 'E' – Hiri EPDM
- 'T' – NPT Whakamutunga Hononga
- 'B' - Nga Hononga Whakamutunga Whakakotahi Reke mo te PP, PVDF ranei
SAR
Clamp-I runga i nga Whakanohonoho (SDR Pipe)
- Rauemi PVC
- Viton® O-Mowhiti
- Kei te waatea i te Metric DIN
- Ka Whakaaetia te Tohu Rere Momo Momo Signet®
| PVC | |
| Rahi | Nama Wahi |
| 2″ | SAR020 |
| 3″ | SAR030 |
| 4″ | SAR040 |
| 6″ | SAR060 |
| 8″ | SAR080 |
| 10″ | SAR100 |
| 12″ | SAR120 |
| 14″ | SAR140 |
| 16″ | SAR160 |
CT
CPVC Tee Whakataunga Whakauru
- 1”-4” Rahi Paipa
- Hewari ki te Tāuta
- Ka Whakaaetia te Tohu Rere a Signet®
| CPVC | |
| Rahi | Nama Wahi |
| 1″ | CT010 |
| 1 ½” | CT015 |
| 2″ | CT020 |
| 3″ | CT030 |
| 4″ | CT040 |
PG
Pūurutau Kāpia-I
- 2”-24” Rahi Paipa
- Hewari ki te Tāuta
- Ka Whakaaetia te Tohu Rere a Signet®
| Pūurutau Kāpia-I - CPVC | |
| Rahi | Nama Wahi |
| 2 "- 4" | PG4 |
| 6 "- 24" | PG24 |
- Tāpiri Humuri –
- 'E' – Hiri EPDM
- 'T' – NPT Whakamutunga Hononga
- 'B' - Nga Hononga Whakamutunga Whakakotahi Reke mo te PP, PVDF ranei
SWOL
Kaitautoko Weld-On
- 2”-12” Rahi Paipa
- 316SS Weld-o-let with PVDF insert
- Hewari ki te Tāuta
- Ka Whakaaetia te Tohu Rere a Signet®
| Kaitautoko Weld-On – 316 SS | |
| Rahi | Nama Wahi |
| 3” | SWOL3 |
| 4” | SWOL4 |
| 6” | SWOL6 |
| 8” | SWOL8 |
| 10” | SWOL10 |
| 12” | SWOL12 |
SST
316SS TI3 Rangatū NPT Tee Fittings
Ka Whakaaetia te Tohu Rere Momo Momo Signet®
| Tee Whakauru Miro – 316 SS | |
| Rahi | Nama Wahi |
| ½ ” | SST005 |
| ¾” | SST007 |
| 1″ | SST010 |
| 1 ½” | SST015 |
| 2″ | SST020 |
| 3″ | SST030 |
| 4″ | SST040 |
SSS
316SS TI3 Rangatū Taonga Tee Taputapu
Ka Whakaaetia te Tohu Rere Momo Momo Signet®
| Tee Whakapaipai - 316 SS | |
| Rahi | Nama Wahi |
| ½ ” | SS005 |
| ¾” | SS007 |
| 1″ | SS010 |
| 1 ½” | SS015 |
| 2″ | SS020 |
| 3″ | SS030 |
| 4″ | SS040 |
SSF
316SS TI3 Rangatū Whakapainga Tee Tee
Ka Whakaaetia te Tohu Rere Momo Momo Signet®
| Tee Tee Fiting - 316 SS | |
| Rahi | Nama Wahi |
| ½ ” | SSF005 |
| ¾” | SSF007 |
| 1″ | SSF010 |
| 1 ½” | SSF015 |
| 2″ | SSF020 |
| 3″ | SSF030 |
| 4″ | SSF040 |
Pūtāhui, Whakahoki me te here
Pūtāhui
Ka whakamanahia e Icon Process Controls Ltd ki te kaihoko taketake o ana hua ka kore he kino o nga taonga me nga mahi i raro i te whakamahinga me te ratonga i runga i nga tohutohu i tukuna e Icon Process Controls Ltd mo te wa kotahi tau mai i te ra o te hokonga o aua hua. Ko te herenga a Icon Process Controls Ltd i raro i tenei whakamana, he iti noa iho ki te whakatikatika, ki te whakakapi ranei, i te kowhiringa Icon Process Controls Ltd, o nga hua me nga waahanga ranei, ka whakatauhia e te Icon Process Controls Ltd te whakamaaramatanga ki tona pai ki te he i nga rawa, i nga mahi ranei i roto i te waa whakamana. Me whakamohiotia a Icon Process Controls Ltd i runga i nga tohutohu kei raro iho o tetahi kereme i raro i tenei whakamana i roto i nga ra e toru tekau (30) i muri i te kereme kore o te rite o te hua. Ko nga hua kua whakatikahia i raro i tenei raihana ka whakamanahia mo te toenga o te waa whakamana tuatahi. Ko nga hua ka tukuna hei whakakapinga i raro i tenei raihana ka whakamanahia mo te tau kotahi mai i te ra o te whakakapinga.
Ka hoki mai
Kaore e taea te whakahoki mai nga hua ki te Icon Process Controls Ltd me te kore whakamana i mua. Ki te whakahoki mai i tetahi hua e kiia ana he hapa, tukuna he puka tono whakahoki mai a te kaihoko (MRA) ka whai i nga tohutohu kei roto. Ko nga hua whakamana me nga hua kore-purangi ka hoki mai ki Icon Process Controls Ltd me utu tomua me te inihua. Ko te Icon Process Controls Ltd e kore e haangai mo nga hua kua ngaro, kua pakaru ranei i te tuku.
Nga herenga
Kaore tenei whakamana e pa ki nga hua e:
- kei tua atu i te waa whakamana, he hua ranei kaore te kaihoko taketake e whai i nga tikanga whakamana kua whakahuahia i runga ake nei;
- kua pa ki te kino o te hiko, te miihini, te matū ranei na te kino o te whakamahi, ohorere, koretake ranei;
- kua whakarereketia, kua whakarereketia ranei;
- ko tetahi atu i nga kaimahi ratonga kua whakamanahia e Icon Process Controls Ltd kua ngana ki te whakatika;
- kua uru ki roto i nga aitua, i nga aitua taiao ranei; ranei
- kua pakaru i te wa e hoki mai ana ki te Icon Process Controls Ltd
Kei a Icon Process Controls Ltd te mana ki te whakakore takitahi i tenei raihana me te tuku i nga hua kua whakahokia ki a Icon Process Controls Ltd kei hea:
- he taunakitanga kei te taha o te hua he mea morearea pea;
- kua noho kore keremehia ranei te hua i Icon Process Controls Ltd mo te neke atu i te 30 ra i muri i te tono a Icon Process Controls Ltd kia tukuna.
Kei roto i tenei raihana te raihana korero kotahi i mahia e Icon Process Controls Ltd e pa ana ki ana hua. KATOA WHAKAMAHI KAUPAPA, KAUPAPA KAUPAPA KAUPAPA, KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA. Ko nga rongoa mo te whakatikatika, whakakapi ranei pera i nga korero i runga ake nei ko nga rongoatanga motuhake mo te takahi i tenei raihana. KAUA E KAUPAPA Icon Process Controls Ltd TE WHAKAMAHI MO TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE TANGATA. KO TE WHAKAMAHI KI TE WHAKAMAHI I TE WHAKAMUTUNGA, KAOTI, KAUPAPA KAUPAPA, KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAORE TANGATA E WHAKAMAHIA KI TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE ICON Process Controls Ltd. Ka whakamaoritia tenei raihana i runga i nga ture o te kawanatanga o Ontario, Canada.
Mena ka mau tetahi wahanga o tenei raihana he muhu, kare ranei e taea te whakamana mo tetahi take, ka kore taua kitenga e whakakore i etahi atu whakaritenga o tenei raihana.
Mo etahi atu tuhinga hua me te tautoko hangarau tirohia:
24-0407 © Icon Process Controls Ltd.Kimihia nga Hua Kounga i runga ipurangi i: info@valuetesters.com
FAQ
- Q: Me aha ahau ki te pakaru nga miro hua?
- A: Ko te kaha o te whakamaarama ka pakaru tonu nga miro hua. Ki te pakaru, whakapā atu ki te tautoko a te kaihoko mo te awhina.
- Q: Ka taea e au te whakamahi i nga taputapu i te wa e whakauruhia ana?
- A: Kaua e whakamahi taputapu i te wa o te whakaurunga na te mea ka pakaru te hua i tua atu i te whakatikatika me te whakakore i te raihana.
Tuhinga / Rauemi
 |
Whakahaere Tukatuka ICON TI3B Raupapa Whakauru Hoe Wira Rere Meter Sensor [pdf] Aratohu Kaiwhakamahi TIB, TI3B, TI3B Raupapa Whakauru Hoe Wira Rere Meter Pūoko, TI3B Rangatū, Whakauru Paddle Wheel Flow Meter Pūoko, Paddle Wheel Flow Meter Sensor, Rere Meter Pūoko, Pūoko mita, Pūoko |
