Ihirangi
huna
WHAKAMAHI ICON PROCESS CONTROLS TVL Series Tank Taumata Whakaatu me te Kaiwhakahaere
Whakatakotoranga
Whānui
- Whakaatu: Kua Whakaatuhia nga Uara Pumautanga Whakawhiti Tawhā Whakawhiti Akomanga Tiaki
Tuku Tohu Whakauru
- Paerewa Voltage: Nāianei: 4-20mA 0-20mA 0-5V* 0-10V* 85 – 260V AC/DC 16 – 35V AC, 19 – 50V DC*
Whakawhiwhi Tohu Huaputa
- Paerewa Voltage: Putanga o naianei * 2 x Relays (5A) 1 x Relay (5A) + 4-20mA 24VDC 4-20mA (Awhe Mahi Max. 2.8 – 24mA)
Mahi
- Tika: E ai ki te IEC 60770 - Te Whakataunga Ira Whakataunga Kore-Linearity Hysteresis Repeatability
Te pāmahana
- Te whakahaere Te pāmahana
Rauemi Kua Makuku
- Whare: Polycarbonate
Nama Wahi
- TVL-550-1821
- TVL-550-1829
Nga Tohutohu Whakamahi Hua
Nga Whakaritenga Taketake
- Kaua e whakamahi i te waeine ki nga waahi e rarua ana e te wiri nui, te wiri, te puehu, te haumuku, te hau kino, me te hinu.
- Kaua e whakamahia te waeine ki nga waahi ka tupono ka pahū.
- Kaua e whakamahi i te waeine ki nga waahi he nui te rerekee o te pāmahana, te rongo ranei ki te hauhautanga, te hukapapa ranei.
- Ko te kaihanga kaore he kawenga mo nga pakaru i puta mai i te whakaurunga kaore e tika ana, kaore i te pupuri i nga tikanga taiao tika, me te whakamahi i te waahanga rereke ki tana mahi.
- Mena ka tupono he whakatuma kino ki te haumaru mena ka pakaru te waahanga, me whakamahi etahi atu punaha motuhake.
- Ka whakamahia e te waeine vol mōreareatage; kia whakawetohia, ka momotuhia mai i te hiko i mua i te rapurongoa.
- A ape i te wetewete, te whakatika, te whakarereke ranei i a koe ake.
- Me tuku nga waahanga hapa mo te whakatikatika i tetahi pokapu ratonga whai mana.
Tuhinga o mua Paewhiri
- Kei roto i te papa o mua nga ahuatanga penei i te Alarm LED indicators, he Receiver Infrared, he Whakaaturanga Nui Maramarama, Patene Papatono, me nga Patene Pana Mahi.
Hoahoa Waea
- Tirohia te hoahoa waea mo te whakaurunga tika. Whakaritea nga hononga tika i runga i te whirihoranga rei me nga whakaritenga whakauru/puta pukoro.
HEI WHAKAMUTUNGA
- Kia kore ai e pokanoa ki nga whakaurunga ahumahi, me whai i nga tikanga e tika ana hei whakarite kia tika te mahi o te waahanga.
FAQ
Q: Ka taea e au te whakatika i te waahanga mena ka hee te mahi?
A: Kao, kaua e ngana ki te whakatika, ki te whakarereke ranei i te waahanga.
Me tuku nga waahanga hapa mo te whakatikatika i tetahi pokapu ratonga whai mana.
P: Me aha ahau mena ka kitea te waahanga ki te wera nui?
A: Kaua e whakamahi i te waeine ki nga waahi he nui te rerekee o te pāmahana, te rongo ki te hauhautanga, te hukapapa ranei. Whakaritea nga ahuatanga taiao mo te mahi tino pai.
- Me ata panui te pukapuka a te kaiwhakamahi i mua i te tiimata ki te whakamahi i te waahanga.
- Ka whai mana te Kaihanga ki te whakatinana i nga huringa me te kore panui i mua.
Tohu Whakamarama
Ko tenei tohu e whakaatu ana i nga aratohu tino nui mo te whakaurunga me te mahi o te taputapu. Ki te kore e u ki nga aratohu e tohuhia ana e tenei tohu ka puta he aitua, he kino, he pakaru taputapu ranei.
Nga Whakaritenga Taketake
Haumaru Kaiwhakamahi
- Kaua e whakamahi i te waeine ki nga waahi e rarua ana e te wiri nui, te wiri, te puehu, te haumuku, te hau kino, me te hinu.
- Kaua e whakamahia te waeine ki nga waahi ka tupono ka pahū.
- Kaua e whakamahi i te waeine ki nga waahi he nui nga rereketanga o te pāmahana, te rongo ranei ki te totohu, te hukapapa ranei.
- Ko te kaihanga kaore he kawenga mo nga pakaru i puta mai i te whakaurunga kaore e tika ana, kaore i te pupuri i nga tikanga taiao tika, me te whakamahi i te waahanga rereke ki tana mahi.
- Mena he kino te mahi o te waeine, ka tupono he whakatuma kino ki te haumaru o nga tangata, o nga rawa ranei, me whakamahi nga punaha motuhake me nga otinga hei aukati i taua riri.
- Ka whakamahia e te waeine vol mōreareatage he aituā whakamate. Me whakawetohia te waeine me te momotu mai i te hiko hiko i mua i te tiimata i te whakaurunga o te rapurongoa (mehemea he kino te mahi).
- Kaua e ngana ki te wetewete, ki te whakatika, ki te whakarereke ranei i te waahanga. Ko te waahanga kaore he waahanga e taea ana e te kaiwhakamahi.
- Ko nga waeine koha me momotuhia ka tukuna mo te whakatikatika i tetahi pokapu ratonga whai mana.
Whakatakotoranga
| Whānui | |
| Whakaatu | LED | 4 x 20mm Teitei | Whero | Tirohanga Whakaritea |
| Kua Whakaatuhia nga Uara | -999 ± 9999 | -99999 ± 999999* |
| Te pumau | 50 ppm | °C |
| Tawhā Whakawhiti | 1200…115200 moka/s, 8N1 / 8N2 |
| Karaehe Tiaki | NEMA 4X | IP67 |
| Waitohu Input | Whakawhiwhinga | |
| Paerewa | Nāianei: 4-20mA | 0-20mA | 0-5V* | 0-10V* |
| Voltage | 85 – 260V AC/DC | 16 – 35V AC, 19 – 50V DC* |
| Waitohu Huaputa | Whakawhiwhinga | |
| Paerewa | 2 x Rerei (5A) | 1 x Rere (5A) + 4-20mA |
| Voltage | 24VDC |
| Putanga o naianei * | 4-20mA | (Awhe Whakahaere Max. 2.8 – 24mA) |
| Mahi | |
| Tika | 0.1% @ 25°C Kotahi Mati |
| Te Tika E ai ki te IEC 60770 – Te Whakaritenga Ira Tepe | Raina-kore | Hīterei | Te tukurua | |
| Te pāmahana | |
| Te Waahi Mahi | -40 – 158°F | -40 – 70°C |
| Rauemi | Makuku | |
| Whare | Polycarbonate |
| Nama Wahi | Whakauru | Putanga |
| TVL-550-1821 | 4-20mA | 2 Rerei |
| TVL-550-1829 | 4-20mA | 4-20mA + 1 Rere |
Tuhinga o mua Paewhiri
Tohu whakamahia i roto i te pukapuka : [ESC/MENU]
Nga Mahi:- Whakauruhia ki te tahua matua ( pehia me te pupuri mo te 2 hēkona neke atu.)
- Puta atu i te Mata o naianei ka Tomo ki te tahua o mua (ara ine ranei)
- Whakakorehia nga huringa i mahia i te tawhā e whakatikahia ana
Tohu i whakamahia i roto i te pukapuka: [TURU]
Nga Mahi:- Tīmata ki te whakatika i te tawhā
- Whakauruhia ki te tahua-roto
- Te whakaū o nga huringa i mahia ki te tawhā e whakatikahia ana
Tohu i whakamahia i roto i te pukapuka: [ ] [ ]
Nga Mahi:- Hurihia te tahua o naianei
- Te whakarerekētanga o te uara tawhā
- Hurihia te aratau whakaatu
Hoahoa Waea
Kotahi TE WHAKAMAHI WHAKAMAHI Kotahi 4-20mA PUTANGA
2 TE WHAKARANGA
HEI WHAKAMUTUNGA
- Whakauruhia te huriwiri me te pana waea maukati kia tuwhera
- Whakauru waea
- Tango huriwiri
- Na te nui o te wawaotanga i roto i nga whakaurunga ahumahi, me tono nga tikanga e tika ana hei whakarite i te mahi tika o te waahanga.
- Karekau te waeine i te whakakakahu ki te whakangao o roto, ki te waahi hiko hiko ranei.
- Mo konei, me whakamahi he whakahiato wa-waa-waho me te iti o te uara o naianei (e taunakitia ana kia rua, max. 2A) me te waahi hiko hiko kei te tata ki te waeine.
- I roto i te take o te whakamahi i te monopolar fuse, me eke ki runga i te taura wahanga.
Papatonotanga 4-20mA Whakauru
Te tatau 4-20mA Whakauru
| MOMO SENSOR | 20mA Tautuhi Ira |
| Ruku | Awhe o te pūoko / Taumaha Tauwhāiti = 20mA |
| Ultrasonic | Teitei Tank |
| Radar | Teitei Tank |
Rere Papatono
RS485 Modbus Papatonotanga
TE MODBUS PRO TOCOL HANDLING
- Tawhā tuku: 1 moka timata, moka raraunga 8, moka mutu 1, moka 2 ranei (ka tukuna nga moka 2, ka whakaaetia nga moka 1 me te 2 ina tae mai), kaore he mana orite
- Reiti Baud: ka taea te kowhiri mai i te 1200 ki te 115200 moka/hekona
- Kawa tuku: MODBUS RTU hototahi
- Ko nga tawhā taputapu me te uara whakaatu e waatea ana ma te atanga RS-485, na te mea ko nga rehita momo-HOLDING (ka hoatu nga uara tau ki te waehere U2) o te kawa Modbus RTU. Ko nga rehita (he roopu ranei o nga rehita) ka taea te panui e te mahi 03h ka tuhia e 06h (rehita kotahi) ranei 10h (rōpū o nga rehita) e ai ki nga korero a Modbus RTU. Ko te rahi o nga roopu mo nga mahi 03h me te 10h kaore e neke ake i te 16 rehita (mo te anga kotahi).
- Ka whakamaoritia e te taputapu nga karere haapurororaa engari kaore e tukuna nga whakautu.
RĀrangi Rēhita
| Rehita | Tuhia | Awhe | Rēhita whakaahuatanga |
| 01h | Kao | -999 ÷ 9999 | Uara ine (kaore he ira-ira) |
| 02h | Kao | 0h, A0h, 60h | Te mana o te ine o naianei; 0h – whaimana nga raraunga; A0h – kua hipa ake te taitapa o runga o te awhe ine; 60h – kua hipa ake te taitapa o raro o te awhe ine; |
| 03h | Ae | 0 ÷ 3 | “Pnt "tawhā i roto i te"InPt” tahua (turanga ira ira) 0 –“ 0”; 1 –“ 0.0”; 2 –“ 0.00”; 3 –“0.000” |
| 04h | Ae | tirohia te whakaahuatanga. | Te ahua o nga rei me te rama whakaoho (whakaahua rua) (1 – ki runga, 0 – weto): 00000000 000e00ba a – tānga R1; b – tānga R2; e – arahina whakaoho;
Mena ka tuhia, anake a, a b He mea nui nga moka (kare e arohia etahi atu) ka taea e enei moka te whakahaere i nga relay ma te atanga RS-485 |
| 05h1 | Ae | 0h ÷ 1800h | Te ahua o te putanga o naianei kaha, ka whakaatuhia ki nga waeine 1/256 mA – ko te tikanga ko te paita teitei e whakaatu ana i te waahanga tauoti me te waahanga paita iti o te naianei putanga e hiahiatia ana. |
| Ae | 2CCh÷1800h | Te ahua o te whakaputanga o naianei, e whakaatuhia ana ki nga waeine 1/256 mA – ko te tikanga ko te paita teitei e whakaatu ana i te waahanga tauoti me te waahanga paita iti o te naianei putanga e hiahiatia ana. | |
| Ae | 0h ÷ 1600h | Te ahua o te voltage te putanga, ka whakaatuhia ki te 1/512 V waeine – ko te tikanga ko te paita teitei e whakaatu ana i te waahanga tauoti, me te paita iti te wahanga hautanga o te puo putanga e hiahiatia ana.tage. | |
| 06h | Kao | -999 ÷ 9999 | Uara tihi (whakaheke) (karekau he ira-ira) |
| 10h | Ae | 0 ÷ 5 | “momoPE"tawhā i roto i te"InPt” tahua (awhe whakauru ingoa). 0 – 0-20 mA awhe; 1 – 4-20 mA awhe; 2 – 0-10 V awhe; 3 – 2-10 V awhe; 4 – 0-5 V awhe; 5 – 1-5 V awhe |
| 11h | Ae | 0 ÷ 5 | “CHar"tawhā i roto i te"InPt” tahua (momo tohu) 0 – rārangi; 1 – tapawha; 2 – pakiaka tapawha; 3 – kua tautuhia e te kaiwhakamahi; 4 – ngā āhuatanga rōrahi o te tank porotakaroa i te tūnga poutū; 5 – ngā āhuatanga rōrahi o te tank porotakaroa i te tūnga whakapae |
| 12h | Ae | 0 ÷ 5 | “FiLt"tawhā i roto i te"InPt” tahua (reiti tātari ine) |
RS485 Modbus Papatonotanga
| Rehita | Tuhia | Awhe | Rēhita whakaahuatanga |
| 13h | Ae | 0 ÷ 3 | “Pnt "tawhā i roto i"InPt” tahua (te kape o te rehita 03h, te waahi ira ira) 0 –“ 0”; 1 –“ 0.0”; 2 –“ 0.00”; 3 –“0.000” |
| 14h | Ae | -999 ÷ 9999 | “Lo C"tawhā i roto i te"InPt” tahua, kaore he ira ira i whakauruhia |
| 15h | Ae | -999 ÷ 9999 | “Kia ora C"tawhā i roto i te"InPt” tahua, kaore he ira ira i whakauruhia |
| 16h | Ae | 0 ÷ 999 | “Lo r"tawhā i roto i te"InPt” tahua, i roto i te 0.1% |
| 17h | Ae | 0 ÷ 199 | “Kia ora r"tawhā i roto i te"InPt” tahua, i roto i te 0.1% |
| 19h | Ae | 0 ÷ 9999 | “t h1"tawhā i roto i te"InPt” tahua, kaore he ira ira i whakauruhia |
| 1Ah | Ae | 0 ÷ 9999 | “t h2"tawhā i roto i te"InPt” tahua, kaore he ira ira i whakauruhia |
| 1Bh | Ae | 0 ÷ 9999 | “t h3"tawhā i roto i te"InPt” tahua, kaore he ira ira i whakauruhia |
| 1Ch | Ae | 0 ÷ 9999 | “td"tawhā i roto i te"InPt” tahua, kaore he ira ira i whakauruhia |
| 1Dh | Ae | 0 ÷ 9999 | “t Sn"tawhā i roto i te"InPt” tahua, kaore he ira ira i whakauruhia |
| 1Eh | Ae | 0 ÷ 9999 | “t Sh"tawhā i roto i te"InPt” tahua, kaore he ira ira i whakauruhia |
| 20h2 | Ae | 0 ÷ 199 | Wāhitau Pūrere |
| 21h | Kao | 21F0h | Waehere tautuhi taputapu (ID) |
| 22h3 | Ae | 0 ÷ 7 | “bAud” tawhā i roto “rS” tahua (reiti baud);
0 – 1200 pauna; 1 – 2400 pauna; 2 – 4800 pauna; 3 – 9600 pauna; 4 – 19200 pauna; 5 – 38400 pauna; 6 – 57600 pauna; 7 - 115200 baud |
| 23h4 | Ae | 0 ÷ 1 | “mbAc” tawhā i roto “rS” tahua (whakaaetanga ki te tuhi rehita ma te atanga RS-485); 0 – tuhi karekau ; 1 – tuhia whakaaetia |
| 24h | Ae | tirohia te whakaahuatanga. | Tawhā o “SECU” tahua (whakaahua rua (0 – „Tuhinga o mua”, 1 – „on”): moka 0 –“He r1” tawhā; moka 1 –“He r2” tawhā |
| 25h | Ae | 0 ÷ 5 | “rESP” tawhā i roto “rS” tahua (he roa te whakautu urupare);
0 – kare he whakaroa atu; 1 –”10c” kōwhiringa; 2 –”20c” kōwhiringa; 3 –”50c” kōwhiringa; 4 –”100c” kōwhiringa; 5 –”200c” kōwhiringa; |
| 27h | Ae | 0 ÷ 99 | “mbtO” tawhā i roto “rS” tahua (he roa te roa i waenga i nga papa kua riro); 0 – kore whakaroa te arowhai;
1 ÷ 99 – te roa morahi e whakaatuhia ana i roto i nga hēkona |
| 2Dh | Ae | 1 ÷ 8 | “Ko Bri” tawhā (whakaata wherikotanga);
1 – te wherikotanga iti rawa; 8 – te kanapa teitei |
| 2Fh | Ae | 0 ÷ 1 | “Whakatikatika” tawhā (aratau whakatika tawhā tau);
0 – „keri” aratau; 1 – „SLid” aratau |
| 30h | Ae | -999 ÷ 9999 | “SEtP"tawhā i roto i te"rEL1” tahua, kaore he ira ira i whakauruhia |
| 31h | Ae | -999 ÷ 999 | “HySt"tawhā i roto i te"rEL1” tahua, kaore he ira ira i whakauruhia |
| 32h | Ae | 0 ÷ 5 | “aratau"tawhā i roto i te"rEL1” tahua:
0 –“kahore” aratau; 1 –“on” aratau; 2 –“of” aratau; 3 –“in” aratau; 4 –“ki waho” aratau; 5 –“mod” aratau |
| 33h | Ae | 0 ÷ 999 | Ko te "t on" tawhā i roto i te “rEL1” tahua, e whakaatuhia ana i roto i te hautekau o nga hēkona, te whakatekau ranei o nga meneti ka whakawhirinaki ki te “wae” tawhā – rēhita nama. 35h) |
RS485 Modbus Papatonotanga
| Rehita | Tuhia | Awhe | Rēhita whakaahuatanga |
| 34h | Ae | 0 ÷ 999 | Ko te "toFF" tawhā i roto i te “rEL1” tahua, e whakaatuhia ana i roto i te hautekau o te hēkona, te whakatekau ranei o nga meneti ka whakawhirinaki ki te “wae” tawhā – rēhita nama. 35h) |
| 35h | Ae | 0 ÷ 1 | “wae” tawhā i roto i te “rEL1” tahua:
0 – hēkona; 1 – meneti |
| 36h | Ae | 0 ÷ 2 | "Ki te" tawhā i roto i te “rEL1” tahua: 0 – karekau he huringa; 1 – kei runga; 2 – atu |
| 37h | Ae | -999 ÷ 9999 | “HET2"tawhā i roto i te"rEL1” tahua, kaore he ira ira i whakauruhia |
| 38h | Ae | -999 ÷ 9999 | “SEtP"tawhā i roto i te"rEL2” tahua, kaore he ira ira i whakauruhia |
| 39h | Ae | -999 ÷ 999 | “HySt"tawhā i roto i te"rEL2” tahua, kaore he ira ira i whakauruhia |
|
3Ah |
Ae |
0 ÷ 5 |
“aratau"tawhā i roto i te"rEL2” tahua:
0 –“kahore” aratau; 1 –“on” aratau; 2 –“of” aratau; 3 –“in” aratau; 4 –“ki waho” aratau; 5 –“aratau” aratau |
| 3Bh | Ae | 0 ÷ 999 | "t runga" tawhā i roto i te “rEL2” tahua, ka whakaatuhia i roto i te hautekau o te hēkona, te whakatekau ranei o nga meneti i runga i te “wae” tawhā – rēhita nama. 3Dh) |
| 3Ch | Ae | 0 ÷ 999 | “toFF” tawhā i roto i te “rEL2” tahua, ka whakaatuhia i roto i te hautekau o te hēkona, te whakatekau ranei o nga meneti i runga i te “wae” tawhā – rēhita nama. 3Dh) |
| 3Dh | Ae | 0 ÷ 1 | “wae” tawhā i roto i te “rEL2” tahua:
0 – hēkona; 1 – meneti |
| 3Eh | Ae | 0 ÷ 2 | "Ki te" tawhā i roto i te “rEL2” tahua: 0 – karekau he huringa; 1 – kei runga; 2 – atu |
| 3Fh | Ae | -999 ÷ 9999 | “HET2"tawhā i roto i te"rEL2” tahua, kaore he ira ira i whakauruhia |
| 50h | Ae | 0 ÷ 1 | “aratau"tawhā i roto i te"HOOLd” tahua (momo huringa i kitea):
0 – tihi; 1 – maturuturu |
| 51h | Ae | 0 ÷ 9999 | “PEA"tawhā i roto i te"HOOLd” tahua (te iti rawa o nga huringa ka kitea, karekau he ira ira) |
| 52h | Ae | 0 ÷ 199 | “Te wa"tawhā i roto i te"HOOLd” tahua, teitei teitei' (te maturuturunga iho ranei) te wa whakaatu i roto i te hēkona |
| 53h | Ae | 0 ÷ 1 | “HdiS"tawhā i roto i te"HOOLd” tahua:
0 –“TINO” aratau; 1 –“HOOLd” aratau |
| 54h | Ae | 0 ÷ 1 | “H r1"tawhā i roto i te"HOOLd” tahua :
0 –“TINO” aratau; 1 –“HOOLd” aratau |
| 55h | Ae | 0 ÷ 1 | “H r2"tawhā i roto i te"HOOLd” tahua:
0 –“TINO” aratau; 1 –“HOOLd” aratau |
| 58h1 | Ae | 0 ÷ 1 | “Ka puta"tawhā i roto i te"HOOLd” tahua:
0 –“TINO” aratau; 1 –“HOOLd” aratau |
| 70h5 | Ae | -999 ÷ 1999 | Te uara o te „X” ruruku ira kahore. 1 o te ahuatanga kua tautuhia e te kaiwhakamahi, kua whakaatuhia ki te 0.1% |
| 71h5 | Ae | -999 ÷ 9999 | Te uara o te „Y” ruruku ira kahore. 1 o te ahuatanga kua tautuhia e te kaiwhakamahi, kaore he tohu ira i whakauruhia |
| 72h5 ÷ 95h5 | Ko etahi atu takirua o „X” – „Y” taunga o nga tohu kahore. 2 ÷ 19 o te ahuatanga kua tautuhia e te kaiwhakamahi | ||
RS485 Modbus Papatonotanga
| Rehita | Tuhia | Awhe | Rēhita whakaahuatanga |
| 96h5 | Ae | -999 ÷ 1999 | Te uara o te „X” ruruku ira kahore. 20 o nga ahuatanga kua tautuhia e te kaiwhakamahi, kua whakaatuhia ki te 0.1% |
| 97h5 | Ae | -999 ÷ 9999 | Te uara o te „Y” ruruku ira kahore. 20 o nga ahuatanga kua tautuhia e te kaiwhakamahi, kaore he tohu ira i whakauruhia |
| A0h1 | Ae | 0 ÷ 3 | “Omod"tawhā i roto i te"OUTP” tahua (aratau putanga hohe o naianei)
0 – kua monokia te putanga o naianei; 1 – putanga o nāianei kua whakahohea ki 4÷20mA aratau; 2 – putanga o nāianei kua whakahohea ki 0÷20mA aratau; 3 – Ko te putanga o naianei e whakahaerehia ana ma te atanga RS-485 |
| Ae | 0 ÷ 2 | “Omod"tawhā i roto i te"OUTP” tahua (aratau putanga o naianei) 0 – kua monokia te putanga o naianei; 1 – putanga o nāianei kua whakahohea ki 4÷20mA aratau; 2 – Ko te putanga o naianei e whakahaerehia ana ma te atanga RS-485 | |
| Ae | 0 ÷ 5 | “Omod"tawhā i roto i te"OUTP” tahua (active voltagaratau putanga) 0 - voltagkua monokia te putanga; 1 - voltage putanga whakahohea ki 0÷5V aratau; 2 - voltage putanga whakahohea ki 1÷5V aratau; 3 - voltage putanga whakahohea ki 0÷10V aratau; 4 - voltage putanga whakahohea ki 2÷10V aratau; 5 - voltagKo te putanga e whakahaerehia ana ma te atanga RS-485 | |
| A1h1 | Ae | -999 ÷ 9999 | “OUTL"tawhā i roto i te"OUTP” tahua, kaore he ira ira i whakauruhia |
| A2h1 | Ae | -999 ÷ 9999 | “OUTH"tawhā i roto i te"OUTP” tahua, kaore he ira ira i whakauruhia |
| A3h1 | Ae | 0 ÷ 999 | “Lo r"tawhā i roto i te"OUTP” tahua, mo te putanga hohe o naianei me te vol hohetage whakaputanga, e whakaatuhia ana i te 0.1% |
| Ae | 0 ÷ 299 | “Lo r"tawhā i roto i te"OUTP” tahua mo te whakaputanga o naianei, e whakaatuhia ana i te 0.1% | |
| A4h1 | Ae | 0 ÷ 199 | “Kia ora r"tawhā i roto i te"OUTP” tahua mo te putanga hohe me te hohenga o naianei, e whakaatuhia ana i te 0.1% |
| Ae | 0 ÷ 99 | “Kia ora r"tawhā i roto i te"OUTP” tahua mo vol activetage whakaputanga, e whakaatuhia ana i te 0.1% | |
| A5h1 | Ae | 0 ÷ 3 | “AL"tawhā i roto i te"OUTP” tahua (he uara putanga o naianei i runga i te rereke tino nui): 0 – kahore he huringa; 1 – 22.1 mA; 2 – 3.4 mA; 3 – 0 mA |
| Ae | 0 ÷ 2 | “AL"tawhā i roto i te"OUTP” tahua (he uara putanga o naianei i runga i nga waahanga tino nui): 0 – kahore he huringa; 1 – 22.1 mA; 2 – 3.4 mA | |
| Ae | 0 ÷ 5 | “AL"tawhā i roto i te"OUTP” tahua (active voltage uara putanga i runga i te motuhake tino nui): 0 – kahore he huringa; 1 – 11 V; 2 – 5.5; 3 – 1.2 V; 4 – 0.6 V; 5 – 0 V |
- Ko enei rehita ka kaha noa mena kei te whakauruhia te taputapu ki te waa, voltage whakaputanga
- i muri i te tuhi ki te rehita kore 20h ka whakautu te taputapu me te waahi "tawhito" i roto i te karere.
- i muri i te tuhi ki te rehita kore 22h ka whakautu te taputapu me te reiti baud hou.
- Ko te uara o te tawhā "mbAc" ka hono ano ki te tuhi ki tenei rehita, na reira ka taea te aukati i nga tuhi, engari kaore e taea te whakakore i nga tuhi ma te atanga RS-485, Ko te wetewete o nga tuhi ka taea mai i te taumata tahua anake.
- ka taea te tautuhi i nga takirua "X -Y" mo nga waahi kore utu. He "kore utu" te takirua (ko te tikanga karekau i te tautuhia tetahi tohu) mena he rite te "X" o tenei tohu ki te 8000h. I muri i te tuhi i nga taurangi X me Y ka tautuhia te tohu ka whakamahia ki te tatauranga o te hua. Ko nga taunga o tetahi waahi ka taea te whakarereke i nga wa katoa.
WHAKAMAHI KI NGA HAPA WHAKAMAHI
- Mena ka puta he hapa i te wa e tuhi ana, e panui ana ranei i te rehita kotahi, ka tukuna e te taputapu he waehere hapa e ai ki nga whakaritenga a Modbus RTU (exampte karere no 1).
Waehere Hapa:
- 01h – mahi ture kore (ko nga mahi 03h, 06h me te 10h anake e waatea ana),
- 02h – wāhi noho rehita kore ture
- 03h – uara raraunga ture
- 08h – karekau he whakaaetanga tuhi (tirohia: tawhā “mbAc”)
- A0h – nui atu i te taitapa o runga o te awhe whakauru
- 60h – nui ake i te taitapa o raro o te awhe whakauru
- A0h me nga waehere 60h ka puta noa i te waa reg. 01h kei te panui ma te mahi 03h (panuihia o te rehita kotahi).
EXAMPLES o nga anga patai/whakautu
- Exampka tono mo te taputapu me te wahitau 1. Ko nga uara katoa he tohu hexadecimal.
Whakaahuatanga mara:
- ADDR Wāhitau Pūrere kei te whatunga Modbus
- Puapuaki Waehere mahi
- REG H, L Wāhitau timata (te wahitau o te rehita tuatahi ki te panui/tuhi, Hi me Lo paita)
- Tatau H, L Te nama o nga rehita hei panui/tuhi (Hi me Lo paita)
- BYTE C Tatau paita raraunga i te anga whakautu
- RARAUNGA H, L Paita Raraunga (Hi me Lo paita)
- CRC L, H Taki hapa CRC (Hi me Lo paita)
Pānuihia te uara kua whakaatuhia (ine), SRP-N118 wāhitau taputapu = 01h:
| ADDR | Puapuaki | REG H, L | Tatau H, L | CRC L, H | |||
| 01 | 03 | 00 | 01 | 00 | 01 | D5 | CA |
a) Ko te whakautu (e whakaaro ana matou kaore te hua ine i waho i te awhe)
| ADDR | Puapuaki | BYTE C | RARAUNGA H, L | CRC L, H | ||
| 01 | 03 | 02 | 00 | F | F8 | 04 |
- RARAUNGA HL – uara whakaatu = 255, kahore ira ira.
- Ka taea te panui te waahi ira ira mai i te reg. 03h
b) Ko te whakautu (mehemea ka puta he hapa).
| ADDR | Puapuaki | HAPA | CRC L, H | |
| 01 | 83 | 60 | 41 | 18 |
HAPA – waehere hapa = 60h, kua hipa te taitapa o raro o te awhe ine
Pānuihia te waehere ID taputapu
| ADDR | Puapuaki | REG H, L | Tatau H, L | CRC L, H | |||
| 01 | 03 | 00 | 21 | 00 | 01 | D4 | 00 |
Te whakautu:
| ADDR | Puapuaki | BYTE C | RARAUNGA H, L | CRC L, H | ||
| 01 | 03 | 02 | 21 | F0 | A0 | 50 |
DATA – waehere tautuhi (21F0h)
Hurihia te wahitau taputapu mai i te 1 ki te 2 (tuhia ki te rehitatanga 20h)
| ADDR | Puapuaki | REG H, L | RARAUNGA H, L | CRC L, H | |||
| 01 | 06 | 00 | 20 | 00 | 02 | 09 | C1 |
- RARAUNGA H – 0
- RARAUNGA L – wāhitau pūrere hōu (2)
Ko te whakautu (he rite tonu ki te karere):
| ADDR | Puapuaki | REG H, L | RARAUNGA H, L | CRC L, H | |||
| 01 | 06 | 00 | 20 | 00 | 02 | 09 | C1 |
Hurihia te reiti baud o nga taputapu katoa e hono ana ki te kupenga (Karere BROADCAST).
| ADDR | Puapuaki | REG H, L | Tatau H, L | CRC L, H | |||
| 00 | 06 | 00 | 22 | 00 | 04 | 29 | D2 |
- RARAUNGA H – 0
- RARAUNGA L – 4, reiti baud hou 19200 baud
- Kaore te taputapu e whakautu ki nga karere momo BROADCAST.
Pānuihia nga rehita 1, 2, me te 3 i roto i te karere kotahi (exampte panui i nga rehita maha i roto i te anga kotahi):
| ADDR | Puapuaki | REG H, L | Tatau H, L | CRC L, H | |||
| 01 | 03 | 00 | 01 | 00 | 03 | 54 | 0B |
KAUPAPA L – te tatau o nga rehita panui (max.16)
Te whakautu:
| ADDR | Puapuaki | BYTE C | RARAUNGA H1,L1 | RARAUNGA H2,L2 | RARAUNGA H3,L3 | CRC L, H | ||||
| 01 | 03 | 06 | 00 | 0A | 00 | 00 | 00 | 01 | 78 | B4 |
- RARAUNGA H1, L1 – reg. 01h (10 – uara whakaatu “1.0”),
- RARAUNGA H2, L2 – reg. 02h (0 – karekau he hapa),
- RARAUNGA H3, L3 – reg. 03h (1 – tūnga ira ira ” 0.0”).
- Kaore he tino whakatinanatanga o te Modbus Protocol i roto i te taputapu. Ko nga mahi kua whakaatuhia i runga ake nei e waatea ana anake.
RĀrangi Tautuhinga Taunoa me nga Kaimahi
| Tawhā | Whakaahuatanga | Taunoa uara | Te uara o te kaiwhakamahi | Tihema wharangi |
| Tawhā o te mahi rere R1 (“rEL1” tahua) | ||||
| SEtP | Rere R1 paepae | 20.0 | 29 | |
| HET2 | Rere R1 paepae tuarua | 40.0 | 29 | |
| HYSt | Hysteresis o te rere R1 | 0.0 | 29 | |
| aratau | Ko te aratau mahi o te relay R1 | on | 29 | |
| t runga | Whakakāhia te whakaroa o te tānga R1 | 0.0 | 30 | |
| toFF | Whakawetohia te roa o te rere R1 | 0.0 | 30 | |
| wae | Waeine o "t runga", a “toFF” tawhā o te tānga R1 | SEC | 30 | |
| AL | Te tauhohenga ki te ahua kino o te rere R1 | Tuhinga o mua | 30 | |
| Tawhā o te mahi rere R2 (“rEL2” tahua) | ||||
| SEtP | Rere R2 paepae | 40.0 | 29 | |
| HET2 | Rere R2 paepae tuarua | 60.0 | 29 | |
| HYSt | Hysteresis o te rere R2 | 0.0 | 29 | |
| aratau | Ko te aratau mahi o te relay R2 | on | 29 | |
| t runga | Whakakāhia te whakaroa o te tānga R2 | 0.0 | 30 | |
| toFF | Whakawetohia te roa o te rere R2 | 0.0 | 30 | |
| wae | Waeine o "t runga", a “toFF” tawhā o te tānga R2 | SEC | 30 | |
| AL | Te tauhohenga ki te ahua kino o te rere R2 | Tuhinga o mua | 30 | |
| Te whirihoranga o te whakauru inenga ("whakauru" tahua) | ||||
| TTYPE | Aratau whakauru | „4-20” | 31 | |
| CHar | Aratau ahuatanga hurihanga | Lin | 31 | |
| FiLt | Te ōwehenga tātari | 0 | 31 | |
| Pnt | Te tūnga ira ira | 0.0 | 31 | |
| Lo C | Te uara iti e whakaatuhia ana (mo te awhe ingoa) | 000.0 | 32 | |
| Kia ora C | Te uara teitei kua whakaatuhia (mo te awhe ingoa) | 100.0 | 32 | |
| t h1 | Te teitei (roa) wahi tuatahi o te tank | 00.00 | 32 | |
| t h2 | Te teitei (roa) waahanga tuarua o te tank | 00.00 | 32 | |
| t h3 | Te teitei (roa) tuatoru o nga wahanga o te tank | 00.00 | 32 | |
| td | Te diameter o te tank | 00.01 | 32 | |
| t Sn | Te tawhiti i waenga i te pūoko me te raro o te tank | 00.00 | 32 | |
| t Sh | Te teitei o te pūoko | 20.00 | 32 | |
| Lo r | Toronga o raro o te awhe whakauru ingoa | 5.0 (%) | 35 | |
| Tawhā | Whakaahuatanga | Taunoa uara | Te uara o te kaiwhakamahi | Tihema wharangi |
| Kia ora r | Toronga o te tihi o te awhe whakaurunga ingoa | 5.0 (%) | 35 | |
| whirihoranga putanga o nāianei ("OutP") | ||||
| Omod | Aratau whakaputa o naianei | “4-20” (mA) | 37 | |
| OUTL | Whakaatu uara mo te 4 mA putanga o naianei | 0.0 | 37 | |
| OUTH | Whakaatu uara mo te 20 mA putanga o naianei | 100.0 | 37 | |
| Lo r | Te toronga o raro o te awhe whakaputa ingoa | 5.0 (%) | 38 | |
| Kia ora r | Toronga o runga o te awhe whakaputa ingoa | 5.0 (%) | 38 | |
| AL | Uara putanga o naianei i runga i te motuhake tino nui | 22.1 (mA) | 38 | |
| Whakaatu Tawhā | ||||
| bri | Whakaatuhia te kanapa | bri6 | 38 | |
| Whirihoranga o te mahi rapunga tihi ("HOLd") tahua) | ||||
| aratau | Te ahua o nga huringa kua kitea | tikanga | 39 | |
| PEA | Huringa iti kua kitea | 0.0 | 39 | |
| Te wa | Te wa teitei o te whakaaturanga teitei | 0.0 | 39 | |
| HdiS | Te momo uara kua whakaatuhia | HOOLd | 39 | |
| H r1 | Te puna o te rere R1, me te mana whakahaere R1 LED | TINO | 39 | |
| H r2 | Te puna o te rere R2, me te mana whakahaere R2 LED | TINO | 39 | |
| Ka puta | Te puna o te mana whakaputa o naianei | TINO | 39 | |
| Tautuhinga mo te uru ki nga tawhā whirihoranga ("SECu") tahua) | ||||
| He r1 | Whakaaetanga ki te whakarereke i te paepae rei R1 me te kore e mohio ki te kupuhipa kaiwhakamahi | on | 39 | |
| He r2 | Whakaaetanga ki te whakarereke i te paepae rei R2 me te kore e mohio ki te kupuhipa kaiwhakamahi | on | 39 | |
| whirihoranga atanga RS 485 (tahua “rS”) | ||||
| Wāhitau | Wāhitau Pūrere | 0 | 40 | |
| bAud | Reiti Baud | 9.6 | 40 | |
| MBA | Whakaaetanga ki nga huringa o nga rehita whirihoranga | on | 40 | |
| MB ki | Te roanga morahi i waenga i nga karere kua riro | 0 | 40 | |
| RESP | He whakaroa atu mo te tuku whakautu | Std | 40 | |
| Te whirihoranga o te putanga tawhā tau | ||||
| Whakatikatika | Aratau whakatika tawhā tau | keri | 41 | |
24-0222 © Icon Process Controls Ltd.
Tuhinga / Rauemi
 |
WHAKAMAHI ICON PROCESS CONTROLS TVL Series Tank Taumata Whakaatu me te Kaiwhakahaere [pdf] Pukapuka Rangatira TVL Series Tank Taumata Whakaatu me te Kaiwhakahaere, TVL Series, Tank Taumata Whakaatu me te Kaiwhakahaere, Whakaatu me te Kaiwhakahaere, Kaiwhakahaere |
