Nga Pu Kopa me te Whakanoho Raina me te kete Aunoa
ā-ringa
NGA RANGATIRA WHAKATAUTANGA O TE KAIHANGA
KOLVER Srl
VIA M. KOKO, 19/21
36016 THIENE (VI) ITALIA
TE WHAKAMAHI KI TE HUA
LINAR2 Kopa me te Rarangi Turanga Pu me te kete Aunoa
| TAUIRA: | LINAR2 | TLS1/LINAR2 |
| Waehere: | 010682/A | 010682/TLS1/A |
Ko te kete Autoadvance anake ka whakauruhia ki te waehere Korver 020099
RARAUNGA HANGARAU O TE HUA
TE WHAKAMAHI ELECTROVALVE: 24V DC 0,35W
TE RAHI ARM: 684 x 191.13 x 722,5h mm
PAUNATIA ARM: 5,7 Kg
AUTOADVANCE KIT WEIGHT 0,4 Kg
| Waehere | Tauira | taipana teitei | Te whiu mm | Te whiu piston mm | Min te tawhiti i waenga i nga wiri i
te toronga ringa teitei |
|
| Min | Max | |||||
| 010682/A | LINAR2 me te kete Autoadvance | 50 Nm | 184 | 665 | 0-50 | |
| 010682/TLS1/A | TLS1/LINAR2 me te kete Autoadvance | 50 Nm | 184 | 665 | 0-50 | 6 mm |
kete Aunoa
Ko te kete ringa Autoadvance he taputapu motuhake e mau ana i runga i te ringa o Kolver Linar2, Linart ranei hei awhina i te kaitoro ki te whakahiato i nga taarua paopao-whaiaro, mena ka kaha te wero axial.
Na roto i te piston pneumatic, ka panaia te wahanga o te ringa e tautoko ana i te huriwiri ki raro hei awhina i te pana axial ki te huri. Ko te piston pneumatic e whakaurunga ana e te hiko hiko, ina tika te hiko, ka pana te piston (tirohia te waahanga kua whakatapua ki nga hononga hiko).
PAPUA AUTOADVANCE KIT VIEW
NGA WAIHANGA RANGATIRA
| Turanga | WHAKAMAHI | Waehere | Qty |
| 1 | RACCORDO SILENZIATORE | 895094 | 2 |
| 2 | ELETTROVALVOLA | 895092 | 1 |
| 3 | Tautoko ELETTROVALVOLA | 895096 | 1 |
| 4 | VITE M3x10 | 231530 | 2 |
| 5 | RACCORDO ARIA 90° M5 TUBO 4MM | 250073 | 3 |
| 6 | ANELLO DI TEFLON AUTOAVANZANTE | 895084 | 1 |
| 7 | BOCCOLA DI GUIDA AUTOAVAZANTE | 895080 | 1 |
| 8 | MOLLA INTERNA AUTOAVANZANTE | 895088 | 1 |
| 9 | PERMAGLIDE AUTOAVANZANTE | 895091 | 2 |
| 10 | TUBO 4MM | 250075 | 1 |
| 11 | CILINDRO 12MM CORSA 50MM DOPPIO EFFETTO | 895090 | 1 |
| 12 | ANELLO FISSAGGIO PISTONE | 895083 | 1 |
| 13 | M5X14 BRUNITA | 895021 | 2 |
| 14 | PISTONE TAUTOKO | 895087 | 1 |
| 15 | CUFFIA TEFLON | 895085 | 1 |
| 16 | VITE M3X5 | 801003 | 4 |
| 17 | ANELLO DI APPOGGIO | 895086 | 1 |
| 18 | M3 X 8 | 240005/ZN | 4 |
| 19 | GUIDA SFERE AUTOAVANZANTE | 895082 | 1 |
| 20 | REGOLATORE UNIDIREZIONALE | 895093 | 2 |
| 21 | SFERA DIAM. 3mm | 200003 | 6 |
| 22 | BOCCOLA DI BLOCCAGGIO | 895081 | 1 |
| 23 | VALVOLA CHIUSURA ARIA | 895095 | 1 |
| 24 | VITE M8 X 16 | 895019 | 1 |
| 25 | CAVO ELETTROVALVOLA 2M | 895092/2M | 1 |
Tohu hiko hiko
| Waiwai | Te hau |
| Te pehanga whakahaere | 0,15 – 0,7 MPa |
| Te pāmahana ambient me te wai | -10 – 50 °C |
| auau mahi Max | 10 Hz |
| Tikanga whakapau pairati | Momo ngongo noa |
| whakahinuhinu | Kaore e hiahiatia |
| Pānga/wiri (m/sc) | 150/30 |
| Whakapiri | He tohu puehu |
| tauranga | IP65 |
| Koia te whakatau voltage | 24 V ± 10% |
| Kohi hiko | 0,35 W |
| Te wa whakautu | Morahi 13 ms |
Hononga hiko
Honoa te taura kua tukuna (waehere 895092/2M) ki te hiko hiko ma te hono tika.
Te taura i waenga i te wae mana me te hiko hiko
Cable 2 mt ki te hono i ia concessioner elettrovalvola cod.
895092/2M.
Ko te taura 2 mt mo te hono ki te hiko hiko (waehere 895092/2M), ka tukuna he hononga hiko hiko i tetahi taha me te 2 titi waea ki tera taha. Me hono te taura whero ki te 24V "lever / W" ranei "Motor ON" tohu kei roto i nga hononga Huaputa o nga waeine Kolver; i te mea ka hono te pango ki te 0VDC noa.
NB: Ko etahi o nga tauira wae he tohu whakaputa motuhake hei whakamahi me te ringa anga whakamua e kiia nei ko "Lever / W".
I/O Kolver wae hononga ki mua ringa
| Tauira | Waehere | Vaolo hiko taura +24V Waea Whero | Vaolo hiko taura 0V Waea pango |
| EDU 1FR/SG/W | 010010/FR/SG/W | Pine 6 | Pine 1 |
| EDU 1BL/SG/W | 003000/SG/W | Pine 7 | Pine 9 |
| EDU 2AE Series | Pin 4 CN1 | Pin 2 CN1 | |
| KDU Series | Pin 42 CN3 | Pin 44 CN3 |
Porotakaro
- E rite ana ki te tikanga SO 6432
- Tata te pono me te takoto Ha Se
- Aukume kore aukume ranei &Mk putanga mahi
- Putanga mahi kotahi nonmvnetic
- Putanga motuhake i runga i te tono
Camilla: INOX
Tohu: INOX
Whakaaturanga: allurninio anodization
Guarnizioni: NBR o VITON
Maama: plastoferrite Mon adatto mo ia pāmahana oltre +60°C)
Whakahokia nga tangi o te puna mo te mahi kotahi (*den bore return spew bra
| Wxkhg peesave | teitei 1 MPa |
| Te mahana mahana | teitei 40°C |
| Afeehaeal emOoning | Paerewa i te awhe wiz* |
| Pneenatie =An* | Ave//tie Ix bole 20 me te 25 |
| pupuhi | 50p ldwal, Levitated he kore i whakamatauria i |
Te kaha
1 teteka Newton [daN] = 10 N
1 teteka Newton [daN] = 1,02 Kgf
| 0 | A | B | C | D | E | F | GK | L | M | N | P | R | S | T | U | |
| 12 | M6 | M16x1.5 | 0.00E+00 | 12 | 6 | 16 | 75 | 22 | 18 | 104 | 9 | 48 | M5 | 5 | e6 | 10 |
Whakaeke
Whakauruhia te rango pneumatic ki te kohao o te mowhiti whakatika.
Whakapaia te rango ki te nati 22mm, kia tiaho nga taputapu pneumati ki te taha taha e whakaatuhia ana i te ahua.
Honoa te rango ki te awhi pana.
Whakatikahia te kakau ki te taiapa tae noa ki te mutu ma te whakamahi i te wiriwiri 5mm. Whakapaia te nati maukati ki te wiriwiri 10mm.
Whakanohoia te ngahere ki runga i te tautoko pikaunga poutū.
Honoa te kete kua kohia ki te pereti pupuri ringa.
Tiaro i roto i te puri pukoro nga kohao whakatika ki nga kohao o te pereti pupuri ringa. Kātahi ka whakamau i ngā tīwiri.
Whakauruhia te kete kua mau ki runga i te rakau reti.
NB. Hei neke a-ringa i te poraka whakamua-whaiaro i roto i te rakau he mea tika kia pehi tonu ki runga i te tautoko kawe poutū kia rite ai te kati o te piston. Mena karekau he pehanga, karekau te poraka whakamua e tuku i te ringa kia paheke whakarunga. I te wa e noho ana te ringa ki te okiokinga, me kati tonu te piston kia mau tonu nga wahanga e rua ki te tautoko.
Matauhia te taura taurite ki te tīwiri hiki.
Huihui hood tiaki
Ko te potae whakamarumaru ka taea te whakanoho / whakaheke i runga i te poraka whakamua i te mutunga o te huihuinga katoa.
Nga hononga pneumatic
Ko te hiko hiko e mau ana ki te tautoko
Vaolo hiko whakapuru ki te taurite
Hononga ki te hiko hiko
Hononga ki te piston
KAUPAPA
- Ko tenei hua KOLVER ka whakamanahia ki nga mahi hapa, ki nga taonga ranei, mo te wa roa mo te 12 marama i muri mai i te ra o te hokonga mai i a KOLVER, mena he iti noa te whakamahi ki te mahi nekehanga kotahi puta noa i taua waa. Mena ka nui ake te reeti whakamahi i te mahi neke kotahi, ka whakahekehia te wa taurangi i runga i te tikanga prorata.
- Mena, i roto i te waa taurangi, ka ahua he te hua i roto i te mahi, i nga rawa ranei, me whakahoki atu ki a KOLVER, ki ona kai tohatoha ranei, he kawe i mua i te utu, me te korero poto mo te he i kiia. Ko te KOLVER, i runga i tana whakaaro anake, ka whakarite ki te whakatika, ki te whakakapi ranei mo te kore utu i aua taonga.
- Ko tenei taurangi kaore e hipokina te whakatikatika, te whakakapinga ranei e hiahiatia ana na nga hua i tukinotia, i whakamahia hee, i whakarerekehia ranei, i whakatikahia ranei ma te whakamahi i nga waahanga kore KOLVER taketake, na nga kaimahi ratonga kore ranei.
- Karekau a KOLVER e whakaae ki te kereme mo te mahi me etahi atu whakapaunga mo nga hua hapa.
- Ko nga pakaru tika, ohorere, tuku iho ranei ahakoa he aha i puta mai i tetahi koha ka tino whakakorehia.
- Ka whakakapihia e tenei taurangi etahi atu taurangi, tikanga ranei, kua whakahuahia, kua whakahuahia ranei, e pa ana ki te kounga, te maakete, te pai ranei mo tetahi kaupapa.
- Karekau he tangata, ahakoa he kaihoko, he kaimahi, he kaimahi ranei o KOLVER, e whai mana ki te taapiri, ki te whakarereke ranei i nga tikanga o tenei taurangi iti ahakoa he aha. Heoi ka taea te whakaroa i te raihana me te utu taapiri. Ko etahi atu korero kei kolver@kolver.it.
vers. 210422
Tuhinga / Rauemi
 |
KOLVER LINAR2 Nga Puka Whakakopa me te Whakanoho Raina me te kete Aunoa [pdf] Pukapuka Tohutohu LINAR2 Nga Pu Kopa me te Whakanoho Raina me te Kete Aunoa, LINAR2, Nga Puka Whakakopa me te Rarangi Whakanoho me te Kete Aunoa, Whakanoho Pu me te Kete Aunoa, Nga Pu me te Kete Aunoa, Kete Aunoa |