LTECH LED Controller (Single-zone)

The Mini Pro series LED remote control uses RF 2.4GHz wireless transmission technology, with a control distance (unobstructed) of up to 30 meters. When paired with the P-series controllers (P1/P2/P3/P4/P5), one controller is compatible with 5 outputs, supporting five types of lighting fixtures: DIM/CT/RGB/RGBW/RGBCW. One remote control can control numerous controllers within its effective range, enabling functions such as turning lights on/off, adjusting brightness, adjusting color temperature and RGB static colors, dynamic mode effects, and scene recall, meeting users’ needs for different lighting applications. For example, the dimming remote (M1A/M1B) has a quick brightness function, allowing one-button switching of brightness percentage; the color temperature remote (M2A/M2B) has a night light function, allowing one-button switching to low brightness; the RGBW remote (M4A/M4B) and RGBCW remote (M5A/M5B) can switch dynamic modes via mode buttons, or achieve a 9-mode loop effect via remote control combination keys.

Tawhā Hangarau

Tauira	M1A	M1B	M2A	M2B	M4A	M4B	M5A	M5B
Tae	Mā	Pango	Mā	Pango	Mā	Pango	Mā	Pango
Momo atarua	DIM		CT		RGB/ RGBW		RGBCW
Momo ahokore	RF 2.4GHz
Mahi voltage	3Vdc (Button battery CR2032×1)
Tūtatari nāianei	＜ 2uA
Distance of the remote	30M (Under unobstructed conditions)
Te mahana mahi.	-25℃~50℃
Taumaha	40g±10g
Ahu	104×58×9mm (remote)，108×63×14mm (remote+hold)

Ahu

Tāuta Hua

Two ways to fix the remote holder :

1. Whakatikahia te pupuri mamao i roto i te pakitara me nga wiri e rua.
2. Whakatikahia te pupuri mamao i te pakitara me te whakapiri 3M.
   • Tuhipoka: Tena koa kumea te ripa pākahiko i mua i te whakamahi tuatahi

Pūhiko whakakapinga

1. Use a screwdriver to unscrew the bottom screw
2. Pull out the battery compartment and replace the battery

Nga Mahi Patene

Dimming Remote Control M1A/M1B

• Power: Turns the light on or off. Brightness
• Touch Ring: Touch to change the light’s brightness.
• Brightness +/-: Adjusts the brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• 4 Brightness Settings: 25%, 50%, 75%, 100% (4 brightness levels with shortcut keys).
• Scene: Short press to recall a scene; long press for 3 seconds to save the current light state to the scene.

Color Temperature Remote Control M2A/M2B

• Power: Turns the light on or off. Color Temperature Touch Ring: Touch to change the light’s color temperature.
• Night Light: Switches to low brightness, night light mode.
• Brightness +/-: Adjusts brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• 3 Color Temperatures: Cool White, White Light, Warm Light; 3 color temperature shortcut keys.
• Scene: Short press to recall a scene; long press for 3 seconds to save the current light state to the scene.

RGB/RGBW Remote Control M4A/M4B

• Power: Turns the lights on or off.
• Touch Color Ring: Touch the RGB color ring to select a color.
• Mode/Speed: Short press to switch dynamic modes; long press to adjust speed. Short press both “R” and “W” keys simultaneously to cycle through dynamic modes.
• Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• Red/Green/Blue: Short-press to turn the static red/green/blue channels on or off. Long press for 1-6 seconds to continuously adjust the brightness of the current channel.
• White Light: For RGBW lights, short-press to turn the W channel on or off; long-press for 1-6 seconds to continuously adjust the W brightness.
• Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

RGBCW Remote Control M5A/M5B

• Power: Turns the lights on or off.
• Touch Color Ring: Select colors using the touch color temperature/RGB color ring.
• Mode/Speed: Short press to switch between dynamic modes; long press to adjust speed. Short press the “R” and ” “ keys simultaneously to cycle through dynamic modes.
• Color Temperature: Short press to turn the color temperature channel on or off; touch the color ring to switch to the color temperature touch ring. Long press for 1-6 seconds to continuously adjust the brightness of the current color temperature.
• RGB: Short-press to turn the RGB channel on or off; touch the color ring to switch to the RGB touch ring. Long-press for 1-6 seconds to continuously adjust the brightness of the current color.
• Red/Green/Blue: Short press to turn the static red/green/blue channel on or off. Long-press for 1-6 seconds to continuously adjust the brightness of the current channel.
• Scene: Short press to recall the scene; long press for 3 seconds to save the currentlighting state to the scene.

Tae	R/G/B values
Whero	R100% G0% B0%
Kōwhai	R100% G100% B0%
Kakariki	R0% G100% B0%
Cyan	R0% G100% B100%
Kahurangi	R0% G0% B100%
Waiporoporo	R100% G0% B100%
Mā	R100% G100% B100%

Aratau hihiko	Red-purple gradient	Aratau pateko	Whero
	Blue-purple gradient
			Kakariki
	Color temperature gradient (warm yellow, cool white)
			Kahurangi
	Three-color gradient (RGB)
	Six-colo  gradient (red, green, blue, yellow, purple, cyan)		Kōwhai
	Seven colors changing (red, green, blue, yellow, purple, cyan, white)		Waiporoporo
	Seven-color gradient (red, green, blue, yellow, purple, cyan, white)
			Cyan
	Three-color gradient (RGB)
			Mixed light white
	White gradually brightens and darkens

Used with P series controllers

Takirua Waehere

Key pairing code

1. Short-press the controller’s ID learning button. The load indicator will start flashing. Please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Single-zone remote control: Press and hold the Power button until the load indicator flashes quickly and stays on, and the color ring changes. Pairing complete.

Power-on code pairing

1. After the controller powers off and back on, please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Single-zone remote control: Press and hold the Power button until the load indicator flashes quickly and stays on, and the color ring changes. Pairing complete.

Tuhipoka: One controller can be paired with a maximum of 10 remote controllers. If more than 10 remote controllers are paired, the ID code of the first remote controller will be automatically deleted.

Maama Waehere

To delete all remote controls: Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the remote controls together

Code pairing (assuming B learns from A)

1. Simultaneously press and hold the top two buttons on remote control B until the indicator light stays on, then release.
2. Within 5 seconds, press any button on remote control A. The indicator light on remote control B will turn off, indicating successful learning. *Remote controls of the same model can learn from each other.

Maama Waehere
Simultaneously press and hold the top two buttons on the remote control for 6 seconds until the indicator light flashes twice, indicating successful code clearing.

Tūnga Maama Tohu

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 6 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.
  • Tuhipoka: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Te kawe me te rokiroki

1. Transportation Products can be shipped via vehicles, boats, and planes. During transportation, products should be protected from rain and sun. Please avoid severe shock and vibration during the loading and unloading process.
2. Storage: The storage conditions should comply with the Class I Environmental Standards. The products that have been stored for more than six months are recommended to be re-inspected and can be used only after they have been qualified.

Nga aro

Please use in a dry indoor environment:

• When installing the battery. pleæeconnectthepositive and negative terminals correctly. Ifthe remote will not be used for along period, take the battery out.
• When the remote distance is shorten and or the remote dæsn’t work frequently, please change the battery in time.
• Please carefully take it and put it down to prevent falls that cause damage.
• please donotattemptto fix products by yourself. If you have any question please contact your suppliers
• Ko tenei pukapuka ka taea te whakarereke me te kore korero atu. Ko nga mahi hua ka whakawhirinaki ki nga taonga. Tena koa whakapiri mai ki a maatau kaihoko mana mena kei a koe etahi patai.

Whakaaetanga Raihana

• Nga wa whakamana mai i te ra tuku: 5 tau
• Free repair or replacement serv’icæ for quality problems is provided within warranty periods. Warranty exclusions below:
• Ko nga tikanga e whai ake nei kaore i roto i te awhe taurangi mo nga ratonga whakatika, whakakapi kore utu ranei:

Beyond warranty periods:

• Tetahi kino hangai na te vol teiteitage. overload. or improper operations; Products with severe physical damage:
• Nga kino i puta mai i nga aitua taiao me te kaha majeure;
• Kua pakaru nga tapanga whakamana me nga tohu tohu.
• No contract signed by our company.

1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law
2. Our company has the right to amend or adjust the terms of this warranty. and release in written form shall prevail.

WHAKATOKANGA

• TE WHAKAMAHI KAUPAPA: Kei roto i tenei hua he pūtau paatene, he pākahiko moni ranei.
• TE MATE, te whara kino ranei ka pa mai ki te kainga.
• Ka horomia e te pūtau patene, te pākahiko moni ranei ka wera te matū o roto i roto i te 2 haora.
• KIA KAUPAPA i nga pākahiko hou me nga pākahiko kua whakamahia kia kore e taea e nga tamariki
• Rapua he rongoa mena ka whakapaehia kua horomia te pākahiko, kua whakauruhia ranei ki roto i tetahi waahanga o te tinana.
  • a) Tangohia me te hangarua tonu, whakakorea ranei nga pākahiko kua whakamahia i runga i nga ture o te rohe, kia matara atu i nga tamariki. KAUA e maka atu nga pākahiko ki roto i nga para o te whare ka tahuna ranei.
  • b) Ahakoa nga pākahiko kua whakamahia pea ka whara kino, ka mate ranei.
  • c) Waea atu ki tetahi pokapū whakahaere paihana o te rohe mo nga korero maimoatanga.
  • d) The compatible battery type: CR2032.
  • e) Ko te ingoa o te pākahiko voltage: 3vc.
  • f) Ko nga pākahiko kore e taea te whakahoki ano kia kaua e whakakiia.
  • g) Do not force discharge, recharge, disassemble, heat above (manufacturer’s specified temperature rating), or incinerate. Doing so may result in injury due to venting, leakage, or explosion, resulting in chemical burns.
  • h) Me whakarite kia tika te whakauru o nga pākahiko i runga i te polarity (+ me te -).
  • i) Kaua e hanumi nga pākahiko tawhito me nga pākahiko hou, momo rama rereke, momo pākahiko ranei, penei i te kawakore, te waro-konutea, te pākahiko rechargeable ranei.
  • j) Tangohia me te hangarua tonu, whakakorea ranei nga pākahiko mai i nga taputapu kaore i whakamahia mo te wa roa e ai ki nga ture a rohe.
  • k) I nga wa katoa kia tino tiakina te wahanga pākahiko. Ki te kore e kati te wahanga pākahiko, kati te whakamahi i te hua, tangohia nga pākahiko, kia matara atu i nga tamariki.

Tuhinga / Rauemi

LTECH LED Controller (Single-zone) [pdf] Aratohu Kaiwhakamahi M1A, M1B, M2A, M2B, M4A, M4B, M5A, M5B, EX4S Single Zone RF-DMX RGBW Controller, EX4S, Single Zone RF-DMX RGBW Controller, RF-DMX RGBW Controller, RGBW Controller, Controller

Tohutoro

• Pukapuka Kaiwhakamahi