Lumens OBS Monomai me te Tohu Kaitohu Kaiwhakamahi

Tena koa tikina mai OBS-Studio software and install it on your computer.
➢ Please download OBS Plugin & Dockable Controller software from the Lumens webpae.

Unuhia te file downloaded and then click [ OBS Plugin and Dockable Controller.exe ] to install.
➢ The installation wizard will guide you through the process. Please follow the on-screen instructions for the next step.

➢ When the installation is completed, press [ Whakaoti ] to end the installation.

2.2 Tāuta ki te Mac

Tena koa tikina mai OBS-Studio software and install it on your Mac.

Tena koa tikina mai OBS Plugin & Dockable Controller software from the Lumens webpae.
Patohia [ OBS Plugin and Dockable Controller.pkg ] to install.

Upoko 3 Tīmata Whakamahi

3.1 Whakaaetia te Tautuhinga Whatunga

To confirm the computer is on the same network segment as the camera.

Kāmera
Whakawhiti Pouara ranei
Tauira Itarangi
Rorohiko

3.2 Set video source from OBS-Studio

1. Paatohia [ OBS Studio ] icon to open the software.

2. Paatohia te "+” to add a video source.

3. Select [VLC Video Source].

4. Give a name to the video source and click [ OK ].

5. In Properties page, select “+” then select [ Add Path/URL ].

6. Key in the RTSP stream URL then click [ OK ].

Ko nga whakatakotoranga wahitau hononga RTSP e whai ake nei:

RTSP Main Streaming (4K@H.265)=> rtsp://camera IP:8554/hevc
RTSP Sub1 Streaming (1080P@H.264)=> rtsp://camera IP:8557/h264
RTSP Sub2 Streaming (720P@H.264)=> rtsp://camera IP:8556/h264

7. Select RTSP URL on the Playlist then click [ OK ].

8. The stream will be displayed on the OBS-Studio.

3.3 How to use Lumens OBS Plugin to control camera

< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >

1. Select [ Tools ] => [ Lumens OBS Plugin ]

2. Lumens OBS Plugin window will be displayed.

3. Select [ Settings ] => [ Camera Assign]

➢ ① Press [ Search ] to find IP cameras from the same network.
➢ ② Select a Camera you would like to control from IP Camera List.
➢ ③ Select the Camera No.
➢ ④ You can change the Camera name.
➢ ⑤ Click [ Apply ] and close Camera Assign window.

4. Select set Camera from Select Camera tab, Camera Control setting will be enable. Now you can control the camera via Lumens OBS plugin.

3.4 How to use Lumens OBS Dockable to control camera

< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >

1. Tīpakohia [ View ] => [ Docks ] => [ Custom Browser Docks… ]

2. Ka whakaatuhia te matapihi Docks Tirotiro Ritenga.

3. Enter the Dock Name & URL

Dock Name：Give a name to the customized dock.
URL: Tāruatia te tauranga hono kua tāutatiaample ka whakapiri ki te mara.
➢ For the URL information, please find the installed folder of Dockable Controller.
➢ Normally the folder would be following path:
C:\Pataka Files\obs-studio\LumensOBSPlugin\Dockable Controller
The part circled in the red box below is the dock samples.

4. Open the dock sample by browser and copy the URL.

5. Fill in the DockName, paste avove URL to custom browser docks window and then click [ Apply ].

6. Customized dock window will be displayed and you can merge it with OBS-Studio software.

7. Click [ PERFEREMCES ] to key in the IP address of the camera you would like to control and click [ Connect ].

8. After connecting, a pops windows will show the camera is connected.

9. Now you can use Lumens dockable to control the IP camera.

Upoko 4 Whakaahuatanga Atanga Mahi

4.1 OBS Plugin

4.1.1 Matua

Kao	Tūemi	Whakaahuatanga Mahi
1	Tautuhinga	Settings options: Camera assign: Enter the camera setting. Please refer to 4.1.2 Settings-Camera Assign Use HotKeys: When checked, prompt window will pop up: Need to set HotKeys in OBS. Ka taea e koe te patene [File]=>[Tautuhinga]=>[Pātuhi Hoa] on OBS-studio to set. PanTilt limit: Enter PanTilt limit setting. Please refer to 4.1.3 Settings- PanTilt limit Preset rename: Enter Preset rename setting. Please refer to 4.1.4 Settings- Preset rename Close: Close Lumens OBS Plugin.
2	View	View kōwhiringa: Aratau ngawari Advance mode: please refer to 4.1.5 View- Advance mode
3	Awhina	Show about us information.
4	Tīpakohia Kāmera	Select the camera number you want to control. Need to set from [ Tautuhinga ] => [ Camera assign ] tuatahi. If the connection fails, a message window will pop up.
5	Topa ōwehenga	Adjust the zoom-in or zoom-out ratio via the slider bar.
6	Pan / Whakatikahia te waahi	Adjust the Pan/Tilt position of the camera screen.
7	Arotahi	Select MF(manual) / AF(automatic) focus. The focusing range is adjustable when the focus mode is set to “Manual”.
8	Tautuhinga tatūkē	Select the number first and then select [ POKOHOKO ] ranei [ KARANGA ].

4.1.2 Settings-Camera Assign

Kao	Tūemi	Whakaahuatanga Mahi
1	Wāhitau IP	You can apply the IP of the IP Camera list or manually enter the IP.
2	Kāmera No.	Select Camera 1~8
3	Ingoa Camera	Manually edit the camera name.
4	Tonoa	Click to apply settings.
5	Kimihia	Click to search for Lumens PTZ Camera, click in the IP Camera list and IP will fill in the IP Address box.
6	IP Camera List	List the searched Camera IP and Camera ID after click search button.

Lumens OBS plug-in CANNOT auto-discover Lumens NDI cameras. Please manually add Lumens NDI models via IP address.

4.1.3 Settings- PanTilt limit

Kao	Tūemi	Whakaahuatanga Mahi
1	PanTilt limit	Switch button to enable/disable PanTilt limit setting.
2	PanTilt limit setting	Set PanTilt limit position.
3	PTZ Tere Comp	Switch button to enable/disable the Pan/Tilt speed vary with the position of the Zoom. Don’t support VC-A50P and VC-BC series.

4.1.4 Settings- Preset rename

Whakaahuatanga

You can edit the Preset name and click [ Apply ] to save settings.

4.1.5 View- Advance mode

Kao	Tūemi	Whakaahuatanga Mahi
1	PTZF Speed	Adjust the moving speed of Pan/Tilt/Zoom/Focus/Preset.
2	Whakaaturanga	Aratau Huarahi: Select exposure mode (Auto/Manual) Tere marumaru: The shutter speed is adjustable when the exposure mode is set to “Manual”. Iris: The size of aperture is adjustable when the exposure mode is set to “Manual”. Whiwhi: The gain limit is adjustable when the exposure mode is set to “Manual”. Aratau Papaanga: Select Scene mode(Low Light/Indoor/Backlight/Motion)
		Aratau Scene
		Te tere marumaru	1/30(1/25)	1/60(1/50)	1/120	1/180
		Iris	F2.0	F3.2	F4.5	F3.2
		Whiwhi	33dB	24dB	21dB	27dB
		VC-A50P does not support Gain
3	White Balance	White Balance Mode: Select the White Balance mode. ➢ Aunoa (4000K~7000K) ➢ Roo-roto (3200K) ➢ Waho (5800K) ➢ Kotahi te Whakauru ➢ ā-ringa (R Gain +/- ; B Gain +/- ) R/B Gain: Manually adjust blue/red gain value. Kotahi Pana: One push WB will be trigger when the white balance mode is set to “Kotahi te Whakauru”.
4	Whakaahua	Aratau Atahanga: Select the Image mode (Default/Custom) When the image mode is set to Custom, following items can be adjusted Te koi: Whakaritea te koi o te ahua. Waipuku: Saturation adjustment of the image. Hue: Whakaritea te hue. Te ao: Gamma Level adjustment. Dig-Effect: Set the mode at which the image is turned. (OFF/MIRROR/FLIP/MIRROR+FLIP)

4.2 OBS Dockable

4.2.1 Matapihi whakahaere

Kao	Tūemi	Whakaahuatanga Mahi
1	Ingoa Camera	Show the camera name you are controlling.
2	ASSIGN PRESETS	Move the camera into the position you want and click the preset button you want to assign.
3	WHAKAMAHI	Tena tirohia 4.2.2 PANUITANGA
4	Preset Controller	Press the button to execute Preset Recall.
5	Topa	Adjust the zoom-in or zoom-out.
6	Arotahi	Adjust the focus range.
7	Pan/Tilt/Kainga	Adjust the Pan/Tilt/Home position of the camera screen.

4.2.2 PERFERENCES

Kao	Tūemi	Whakaahuatanga Mahi
1	Wāhitau IP	Enter the IP address the Camera and click [Connect] button.
2	Ingoa Camera	Modify the camera name. (Default: Camera01) Camera names are limited to 1 – 12 characters. Please use a camera name by mixing uppercase and lowercase letters or numbers. Do not use “/” and “space” or special symbols.
3	Paatene whakatu	Press buttons to switch the mode. Whakaata- Kei / Weto Piripi- Kei / Weto Motionless Preser- Kei / Weto Arotahi– Manual/Auto
4	Tere	Adjust the moving speed of Pan/Tilt/Zoom/Focus.
5	Turanga Tuatahi	Select the initial position. ( Last MEM / 1st Preset)

Nga korero Mana pupuri

Ko Lumens he tohu hokohoko kei te rehitatia e Lumens Digital Optics Inc.

Te kape, te whakaputa, te tuku ranei i tenei file e kore e whakaaetia ki te kore e tukuna he raihana e Lumens Digital Optics Inc. ki te kore e kape i tenei file hei tārua i muri i te hokoasing tenei hua.

Hei whakapai tonu i te hua, nga korero kei roto i tenei file ka taea te whakarereke me te kore panui i mua.

Ki te tino whakamaarama, ki te whakaahua ranei me pehea te whakamahi i tenei hua, ka korero pea tenei pukapuka ki nga ingoa o etahi atu hua, kamupene ranei kaore he whakaaro ki te takahi.

Whakakahoretanga o te whakamana: Karekau a Lumens Digital Optics Inc. te haangai mo nga mea hangarau, he hapa whakatika, he hapa ranei, karekau he haepapa mo nga pakaru ohorere, pa atu ranei i puta mai i te whakarato i tenei. file, te whakamahi, te whakahaere ranei i tenei hua.

Tuhinga / Rauemi

Lumens OBS Plugin and Dockable Controller [pdf] Pukapuka Kaiwhakamahi
OBS Plugin and Dockable Controller, Plugin and Dockable Controller, Dockable Controller, Controller

Tohutoro

Pukapuka Kaiwhakamahi

OBS Plugin & Dockable Controller

Pukapuka Kaiwhakamahi – English

Upoko 1 Nga whakaritenga o te punaha

1.1 Whakaritenga Pūnaha

1.2 Whakaritenga Pūmanawa

Chapter 2 Install OBS Plugin & Dockable Controller

2.1 Install with Windows 7 / 10