Ihirangi huna
1 pod POINT 1.0-Solo-3 Array Circuit
2 Nga Tohutohu Haumaru
3 Nga Whakaritenga Whenua
4 Hononga hiko
5 Nga korero
6 Poari Toha
7 Te Whakaritenga o Busbar
8 Nga taura raraunga
9 Pouaka Paopao
10 Hononga Tohu
11 FAQ
12 Tuhinga / Rauemi
12.1 Tohutoro

pod-logo

pod POINT 1.0-Solo-3 Array Circuit

pod-POINT-1-0-Solo-3-Array-Circuit- HUA

Panui Ture
I mua i te reviewI roto i tenei aratohu whakaurunga, panuihia nga korero e whai ake nei.

  • Ko te Pod Point karekau he kawenga mo te whakaurunga me te tuku mahi ranei i mahia e tetahi tuatoru
  • I te kore o te mangere, i etahi atu mahi takahi ranei a Pod Point, kaore he kawenga a Pod Point mo tetahi whara, mate, kino ranei i puta mai i nga mahi, ratonga, hua, taputapu ranei i mahia e te kaihoko, i tetahi atu tuatoru ranei (kaore i te Pod Point, i tetahi roopu ranei kei a ia te kawenga) e pa ana ki te whakaurunga me te tukunga o te Array Circuit.
  • Mena kaore i mahia e te Pod Point te whakaurunga me te tono ranei o te riihini, na te kaihoko te kawenga ki te whakarite ko tetahi tuatoru i tohua ki te whakauru, ki te whakarite ranei i te Array Circuit e tika ana me te mahi i runga i nga tikanga katoa e pa ana me te tohu ki nga aratohu e whakaratohia ana i roto i tenei tuhinga (me nga tuhinga e hono ana ki roto). Ka whakaratohia e Pod Point tenei aratohu hei tohutoro anake, a ehara i te mea hei whakakapi mo te whakaturanga tangata mohio ki te kawe i te whakaurunga me te tono.
  • Ko te Array Circuit ehara i te mea kia whakauruhia e nga roopu tuatoru.
  • Ka hiahiatia he taputapu whakatapua, kaua e mahia te whakaurunga ma te whakamahi i te taputapu noa.
  • Kaua e tuwhera, neke, whakarereke, rewire, tamper ka pokanoa ranei ki to Array Circuit ina oti te whakauru.
  • Me whakarite e te kaihoko kia kaua e whakatuwherahia, kia nekehia, kia whakanekehia, kia waeahia ano, kia kore raneiampka whakararu, ka pokanoa ranei, me te kore e korero tuatahi ki nga kaiarahi hangarau hou a Pod Point me te whakamohio tika ki a Pod Point me te whai ki nga taunakitanga a Pod Point.
  • Tena koa tirohia nga tikanga whakamana a te kaitarai e pa ana ki te mahi pera. Mena kei a koe etahi awangawanga e pa ana ki tetahi Pod Point kua whakatuwherahia, kua nukuhia, kua waeahia ano, kua rereke ranei.ampKa mahia, ka pokanoa ranei, tena koa whakamohio atu ki a Pod Point kia taea ai te tuku tohutohu tika, me te mahara karekau he kawenga a Pod Point mo to whakaurunga na runga i te tuku tohutohu pera.
  • In the absence of any negligence or other breach of duty by Pod Point, Pod Point is not responsible for injury, loss or damage caused by the Array Circuit. being opened, moved, modified, re-wired or otherwise tampi mahia, i pokanoa ranei e te kaihoko, e tetahi atu tuatoru ranei (kaore na Pod Point, tetahi roopu ranei kei a ia te kawenga).

Nga Tohutohu Haumaru

pod-POINT-1-0-Solo-3-Array-Circuit- (1)Ka whakamahia tenei tohu puta noa i tenei aratohu hei tohu whakatupato. Ki te kore e whai i enei whakatupato ka paheke pea nga taputapu, te wharanga whaiaro, ka kore ranei te whakamana.
pod-POINT-1-0-Solo-3-Array-Circuit- (2)Ka whakamahia tenei tohu puta noa i tenei aratohu hei tohu morearea. Ki te kore e whai i nga tohutohu kei roto i tenei aratohu ka pa mai pea te whara o te tangata, te ru hiko ranei.

  • Ko tenei hua ka whakauruhia e nga tangata whai mana me nga tangata mohio.
  • Ko tenei hua anake ka tiakina e nga tangata whai tohu, mohio me nga tangata whai tohutohu.
  • Ko nga mahi whakaurunga me nga mahi tiaki me whakahaere i runga i te putanga o naianei o BS 7671 me etahi atu ture a-motu, a-rohe ranei, ture, arataki ranei e tika ana i te wa o te whakaurunga. Me whai whakaaro ano koe ki te tohutoro i te IET Code of Practice for Electric Vehicle Charging Taputapu Tāuta
  • Ko te kawenga ma te (ng) tangata e kawe ana i nga mahi whakaurunga ki te whakarite kia whai nga tohutohu me nga tikanga katoa e whakaahuatia ana i roto i tenei aratohu i nga wa katoa.
  • Kaore e taea e Pod Point te whakaae ki tetahi kawenga kaore i whaihia tenei aratohu whakauru.
  • Ko nga paerewa, nga whakaritenga me nga hoahoa ka huri i ia wa ki ia wa, ka rereke pea nga korero kei roto i tenei aratohu me te kore panui.
  • Hei whakarite i te haumaru hiko, me mau tonu tenei hua kia rite ki nga tohutohu i whakatakotoria i roto i tenei aratohu.
  • Ko tenei hua me kaua e whakarereketia, e whakarereketia ranei i tetahi huarahi, ma te pera ka pa mai he whara whaiaro, he kino ranei ki nga taputapu. Ko nga whakarereketanga, nga whakarereketanga me etahi atu pokanoa kore mana ki te hua ka whakakorehia to raihana. Tena koa tirohia ta maatau Whakaaetanga Whakaputanga mo etahi atu korero mo tenei.
  • Physical damage to the product may result in unsafe conditions, ensure electricity supplies are isolated and the product is not used if damaged consult Pod Point for further information and repair.

TE WHAKAMAHI! Voltage – Kaua rawa e mahia he whakarereketanga kore mana ki nga waahanga o roto o tenei hua. Me whakarite kia wehea, kia maukatihia te tuku ki te Array Circuit i mua i te whakahaerenga o nga mahi whakauru me te tiaki.

Nga Whakaritenga Whenua

Me hono atu te Array Circuit ki te punaha whenua pumau, whakarewa i runga ano i te putanga o naianei o BS 7671 me etahi atu ture a-rohe, a-motu hoki.

He pai te Array Circuit mo te hono ki nga punaha whenua e whai ake nei:

pod-POINT-1-0-Solo-3-Array-Circuit- (3)

Ko te kaiwhakahaere te kawenga mo te whakarite kia tika te punaha whenua e whakamahia ana me te whakatutuki i nga whakaritenga e whakaatuhia ana i roto i te putanga o naianei o BS 7671.

  • * Ko nga ahuatanga ka whakauruhia he Tiihini Solo ki waho, me whakauru ano he taputapu tiaki PEN tuwhera ki te puna tuku.
  • ** Me whai whakaaro ano ina hono te Array Circuit ki tetahi punaha TT earthing. Ka hiahiatia he RCD i nga wa katoa i te puna tuku i whakamahia he punaha TT whenua - mo te whakaurunga katoa, mo te rohe ranei mo te riihi anake.
  • Mena ka hiahiatia he RCD mo te punaha TT whenua, me whakaroa te RCD mo te Momo B>100mA te wa roa.

Hononga hiko

Cables being terminated to the Array Circuit must be done so to avoid unintentional damage -appropriate cable glands must be used at the point of entry to the cable connection enclosure, cables must be stripped to the correct length to avoid excess copper showing at the termination. Terminations must be tightened within the specified torque of:

Waehanga Toru (Nm)
Katoa nga waahanga EAE Tirohia te Tuhinga EAE
PP-E-170094 – 100A Whakauru MCB 3.5
PP-E-210410 – 100A Putanga RCCB 2.5
PP-E-210414 – Tauranga Whenua 10
PP-A-170103 – Kaiwhakahaere Array 0.5

Me tohu tika nga taura ma te tae i roto i te kohanga hononga.

Kaua e whakaurua tenei punaha me te kore he hoahoa kaupapa motuhake i hangaia e Pod Point, kia panuihia kia rite ki tenei aratohu.

Ko tenei aratohu whakauru e whakaatu ana i nga tikanga whakauru mo te Array Circuit 1.0 (Solo). Ko te Array Circuit putanga 1.0 kei roto:

  • Pod Point's Array Circuit Distribution Board
  • Elbagate's MK E-Raina Busbar
  • Pouaka Paopao a Elbagate
  • Pouaka Raraunga a Pod Point

I runga i te tuku hiko, ka taea e tenei punaha te whakanui ake i te 3 ki te 27 nga waeine ka taea te whakauru ma te whakamahi i te punaha aroturuki kawenga atamai. Ko te whakarereketanga o tenei punaha na te Taapiri Taputapu me nga Pouaka, kei reira te whakaurunga o nga hanganga kaha i roto i te waa kotahi ka taea te hono atu ia Solo ki nga hanganga o mua., Ko te Array Circuit 1.0 he hototahi ki te Solo taketake me Solo 3 anake.

Nga rauemi kei roto:

  • Array Circuit Busbar & Busbar Components (site specific)
  • Papa Tohatoha Array Circuit

Nga rauemi hei whakaoti i tenei whakaurunga:

Whakaahuatanga Qty
(PP-M-170167-1) 40mm repe taura Armoured Pae motuhake
(PP-M-170166-1) 20mm repe taura Armoured Pae motuhake
5-matua taura Pae motuhake
2-matua taura 3x mo te roanga o te waahi - he waahi motuhake
Unistrut / Paepae Kete Pae motuhake
Pourewa PVC 20mm2 Pae motuhake
20mm2 Nohona maitai Clamps Pae Motuhake
(PP-K-220074) Data Box Kit [Ko te tikanga] 1x mo ia Tohu Tohu kua whakauruhia [Min.] 0.5x mo ia Tohu Tohu kua whakauruhia
(PP-K-220073) Kete Pouaka Paopao 1x mo ia Tohu Tohu kua whakauruhia

Nga korero

Whakaahuatanga Uara
  Weight of Distribution Board (incl. packaging)   16.3 kg
  Whakarōpū Taiao EMC  Te Akomanga A – Te TaongaTereTeKaenga B – Nga Putanga
  Morahi tāuru iahiko iahiko poto (Turanga PFC)   10 kA
  I whakatauhia te iahiko here-poto (Icc)   10 kA*
  Ko nga taputapu tiaki iahiko-poto whakarunga e tika ana  Min. 100AM. 10kA
  • Me kaua e neke ake i te 10kA te he o te naianei kei te urunga tuku ki te Poari Tohatoha Array

Te rarangi tohutoro o nga Kupu

  1. pod-POINT-1-0-Solo-3-Array-Circuit- (4)Wae whangai
  2. Tapa-atu me te Uwhi
  3. Taiapa
  4. Pouaka Paopao
  5. Puhi Puhi
  6. Pouaka Raraunga
  7. Poari Toha (DB)

Te whakaurunga o EAE Busbar Wae / Pūnaha
All components provided by Elbagate (EAE) should be fitted and installed as per their specifications and in accordance with their guidelines. Pod Point does not take ownership or responsibility of their product or methodology. This guide only provides detail on using the product to fit the purpose of the Array Circuit and its related components. The Busbar Trunking used is the Elbagate E-Line MK version, details can be found here: https://www.eaeelectric.com/busbar-systems/e-line-mk-busbar

Ka mutu te whakaurunga tuatahi me te whakaurunga tuaruaview

Ko te whakaurunga Array Circuit me puta i roto i nga s motuhaketage:

  1. Stage 1 – Ko te katoa o te hanganga hāngū (Poari Tohatoha, Puhi Puhi, Pouaka Paopao me nga Pouaka Raraunga). Karekau he Tohu Tohu i tenei wa.
  2. Stage 2 – I runga i te tono motuhake, ka whakauruhia he Tohu Tohu ki te ahua angamaheni. Ka whakaurua tenei ki roto i tana ake Pouaka Tapa-atu i te taha o te Puhi.
    Tuhipoka: Ko te tohu tohutoro o nga hikoinga e whai ake nei (arā XYZ) tirohia ki te Stage X, Wāhanga Y me te Hipanga Z.

Poari Toha

Stage 1

Wāhanga 1: Te Whakaritenga o te Poari Toha - AC-DB-01-UAA ANAKE

TE WHAKAMAHI! Voltage – Kaua rawa e mahia he whakarereketanga kore mana ki nga waahanga o roto o tenei hua. Me whakarite kia wehea, kia maukatihia te tuku ki te Array Circuit i mua i te whakahaerenga o nga mahi whakauru me te tiaki.

  1. Te ine me te tapahi i te taraka (me te awaawa mehemea e tika ana) ki te waahi ka whakauruhia te Poari Toha (DB). Wewetehia te taupoki ka wetekina te taupoki.pod-POINT-1-0-Solo-3-Array-Circuit- (5) pod-POINT-1-0-Solo-3-Array-Circuit- (2)
  2. Mark 4 holes using the locations identified in Figure 2. Drill the 4 holes in the wall where the Distribution Board will be fitted.
  3. Whakauruhia te Poari Toha ki runga i te pakitara ma te whakamahi i te 4x nga wiri e tika ana.
  4. Tangohia nga patoto tika mai i te(ng) taha o te Poari Toha ka hono ai te tuku taumai, te tuku puta me nga taura Raraunga puta (ma te taraka, taura patu me te awaawa) ka hono. pod-POINT-1-0-Solo-3-Array-Circuit- (7)
  5. Wewetehia nga taura matua mai i te tuku mai, whangaia ma te patoto ki te Poari Toha ma te whakamahi i te repe tika. pod-POINT-1-0-Solo-3-Array-Circuit- (8)Tiaki Tiaki: Kia tae atu nga taura kua tihorea ki te 100A MCB i runga Rererangi DIN Runga.
  6. Honoa te tukunga puta me te Papa whenua ki te Waenga Puhi Puhi e rite ana, whakatika ki te pakitara/tuanui ina tika. Whakamahia te EAE Install Manual mo nga tautuhinga taipana tika. pod-POINT-1-0-Solo-3-Array-Circuit- (46)
  7. Whangaia te taura i roto i te repe o te Poari Tohatoha, katahi ka inehia, ka tihorea nga taura ki raro kia whakauruhia ki o ratou pito e rite ana.pod-POINT-1-0-Solo-3-Array-Circuit- (10)
  8. Honoa te tukunga Busbar ki te Lower DIN Rail RCCB me te tauranga whenua, pera i te Whakaaturanga 8 i raro nei. pod-POINT-1-0-Solo-3-Array-Circuit- (11)Whakaatu 8. Hoahoa Poari Toha o AC-DB-01-UAA -Kotahi te ara pahi
  9. Screw L1 (brown), L2 (black), L3 (grey) and Neutral (blue) at the bottom of RCCB(s) on the Lower DIN Rail. Fit the earth wire into the earth terminal on the Lower DIN Rail. Live and Neutral wires should be screwed to a torque of 2.5Nm, Earth to a torque of 10Nm. pod-POINT-1-0-Solo-3-Array-Circuit- (12)
  10. Feed all 6 Data cables through appropriate knockout(s) using (a) gland(s). Label appropriately.
    Tiaki Tiaki: Me whakarite kia nui te roa kia tae atu ki nga Kaiwhakahaere Array i runga Rerewe DIN Runga.
    Tiaki Tiaki: Me mohio kei te mohio nga taura Raraunga
  11. Tapahia me te tihorea nga taura Raraunga ki nga roa e tika ana, ka uru ki te Kaiwhakahaere Array e pa ana ki "OUT 1" ME "GND", tirohia te Whakaahua 11.
    Tiaki Tiaki 1: Me mohio kei te hono koe i te waea whakamarumaru ki te Kaiwhakahaere Array tika mo taua wahanga.
    Tiaki Tiaki 2: Me mohio kei te hono te parepare ki te titi whenua o te kaiwhakahaere.
    Tiakitanga 3: Ko nga papa o roto o nga kaiwhakahaere he mea noa. Ko nga hononga katoa ki waho me hono wehe ki o raatau wahanga e hono ana, hei tauira, me hono noa te kaiwhakahaere L1 ki nga Kaitohu i tukuna mai i L1.pod-POINT-1-0-Solo-3-Array-Circuit- (13)Whakaatu 11. Nga hononga Kaiwhakahaere Array - e whakaatu ana i te 1x anake mo ia wahanga mo te ngawari
    Whangaia nga taura Raraunga ma roto i nga awaawa ki te Pouaka Raraunga tuatahi, ka piri ki te taiapa tuatahi. pod-POINT-1-0-Solo-3-Array-Circuit- (14)Whakaahua 12. Exampte hononga Waea Raraunga mai i te Poari Toha ki te Pouaka Raraunga tuatahi
  12. Me hono nga kaiwhakahaere Huanga katoa ki nga waea e rua (Live me te GND) mo ia taura Raraunga.
    Tiaki Tiaki: Me whakarite kia marama te tautuhi i ia taura Raraunga kia tika.
  13. Pikitia ki te uhi o te Papa Tuhaa Toha.
  14. Whakapirihia nga taapiri katoa i tukuna me nga papa ki runga i te uhi.
  15. Whai muri i te manatoko me te whakamatautau tuatahi, tirohia nga kaupae me te Whakaahua 13 i raro nei mo te raupapa whakakaha. pod-POINT-1-0-Solo-3-Array-Circuit- (15)
    1. Whakakā MCB matua 100A (tirohia te Pikitia 14 i raro nei)
    2. Whakakāhia te 1-pou 2A MCB e whangai ana i nga kaiwhakahaere raupapa (tirohia te Pikitia 9 i raro nei)
    3. Whakawhitihia te reriwe DIN raro (ng) RCCB(ka whakawhirinaki te maha o nga RCCB ki te SKU)
      Tiaki Tiaki: Me hono nga Kaitohu Solo katoa ki te Ipurangi ma te Wi-Fi, me whirihora mo te whakamahi me te punaha Array.

Wāhanga 1: Te Whakaritenga o te Poari Tohatoha - AC-DB-01-UBA ANAKE

TE WHAKAMAHI! Voltage – Kaua rawa e mahia he whakarereketanga kore mana ki nga waahanga o roto o tenei hua. Me whakarite kia wehea, kia maukatihia te tuku ki te Array Circuit i mua i te whakahaerenga o nga mahi whakauru me te tiaki.

Ko tenei wharangi kua ata waiho kia tuwhera hei kaipupuri waahi mo te whakaurunga o te Array Circuit 1.0 Distribution Board AC-DB-01-UBA SKU rereke. Ko te tukunga i muri mai o tenei tuhinga ka whakamaarama i nga waahanga whakaurunga e tika ana ina oti ana, ka whakaaehia e nga roopu whai mana katoa.

Te Whakaritenga o Busbar

Wāhanga 2: Te Whakaritenga o te Puhi Puhi

TE WHAKAMAHI! Voltage – Kaua rawa e mahia he whakarereketanga kore mana ki nga waahanga o roto o tenei hua. Me whakarite kia wehea, kia maukatihia te tuku ki te Array Circuit i mua i te whakahaerenga o nga mahi whakauru me te tiaki.

Te waahi tiaki: Ka taea te whakauru i te Busbar Trunking i roto i te maha o nga tikanga; kua whakairihia ki te pakitara, kua whakairihia te tuanui, kua whakatarewahia te tuanui, tirohia nga Whakaahua 16, 17 me te 18.

  1. Te ine me te tohu i nga tawhiti i runga i te huarahi kia pai ai te whakauru i te iti rawa o te 2x Taiapa ia 2m te roa o te Busbar Trunking. Me whakanoho nga taiapa ki mua i nga Ira Tap-off ka taea.
    Tiaki Tiaki: Me whakarite kia kaua enei Taiapa e kapi i nga Iwi Tapa-atu, i nga hononga Busbar ranei, ka waiho kia rawaka te waahi mo tetahi Pouaka Tapa-atu hei whakauru.
  2. Te ine me te tohu i nga tawhiti i runga i te huarahi hei whakanoho i nga Pouaka Raraunga. Me whakanoho nga Pouaka Raraunga ki waenga i nga waahi waka waka EV e 2, kia taea ai he hononga Raraunga mo nga Kaitono Solo e 2 kei te heke mai.

pod-POINT-1-0-Solo-3-Array-Circuit- (16)

pod-POINT-1-0-Solo-3-Array-Circuit- (17)

Nga taura raraunga

Wāhanga 3: Whakatakotoria te Tāutatanga o ngā Tauira Raraunga

TE WHAKAMAHI! Voltage – Kaua rawa e mahia he whakarereketanga kore mana ki nga waahanga o roto o tenei hua. Me whakarite kia wehea, kia maukatihia te tuku ki te Array Circuit i mua i te whakahaerenga o nga mahi whakauru me te tiaki.

pod-POINT-1-0-Solo-3-Array-Circuit- (18)

  1. Na te maha o nga huarahi ka taea te whakanoho i te Busbar, e 3 nga tikanga e taunakihia ana e Pod Point. Ka whakamahia e te katoa te punaha o te noho clamps me nga Pouaka Raraunga kua whakaritea ki te Unistrut i te taha o te Busbar.
  2. Whakauruhia nga Pouaka Raraunga ki te Unistrut/Aapaapa ki nga waahi kua tohua i te Hipanga 1.2.2.
  3. Whakanohoia clamps i nga tawhiti e tika ana te mokowhiti kia mau ai te Conduit to Unistrut or Bracket.
    Te waahi tiaki: Saddle clamps me whakauru i mua i te pae pahi mena kei te whakamahi i te Taiapa kotahi mo nga raraunga me te whakatika pae pahi. pod-POINT-1-0-Solo-3-Array-Circuit- (19) pod-POINT-1-0-Solo-3-Array-Circuit- (20)
  4. Whakauruhia te awa ki roto i te nohoanga clamps me ki roto i nga Pouaka Raraunga e hiahiatia ana tae noa ki te mutunga o te Array Circuit, tirohia nga Whakaahua 19 me te 20. pod-POINT-1-0-Solo-3-Array-Circuit- (20) Te waahi tiaki: Me mutu te roa whakamutunga o te awa ki roto i te Pouaka Raraunga, ahakoa te waahi o te kokoru EV.
  5. Feed and label the first set of Data cables, i.e. those connected to the far left hand side of the Array Controllers, through the first Data Box, as seen Figure 21.
    Te waahi tiaki: Me whakarite kia tika te tautuhi i ia taura i runga i te ahua mohio. Mo te example, 1-L1 tohu te takirua tuatahi "1-" o te "L1" Kaiwhakahaere Array.
  6. Whangaia te huinga o muri o nga taura Raraunga ki roto i te Pouaka Raraunga. Kia kotahi te kopiko, herea-kotu ka tohu i enei taura hei takirua tuarua mo ia Ora. Tirohia te Whakaahua 22 me te 23. Care point: Ensure each cable is correctly identified in a sensible fashion in each box.
  7. Wāhanga 4: Tāutanga Pouaka Paopao

Pouaka Paopao

TE WHAKAMAHI! Voltage – Kaua rawa e mahia he whakarereketanga kore mana ki nga waahanga o roto o tenei hua. Me whakarite kia wehea, kia maukatihia te tuku ki te Array Circuit i mua i te whakahaerenga o nga mahi whakauru me te tiaki.

Wāhanga 4: Tāutanga Pouaka Paopao

TE WHAKAMAHI! Voltage – Kaua rawa e mahia he whakarereketanga kore mana ki nga waahanga o roto o tenei hua. Me whakarite kia wehea, kia maukatihia te tuku ki te Array Circuit i mua i te whakahaerenga o nga mahi whakauru me te tiaki.

  1. Tautuhia te EV Charging Bay kei reira te Chargepoint ka taea te whakauru.
  2. Tautuhia te Ira Tapa-atu hei whakauru i te Pouaka Whakatau. Koinei te mea tino tata, ki te kore e arai i te Tohu.
    TE WHAKAMAHI! Voltage – follow the safe isolation procedure
  3. Whakatuwherahia te Pouaka Paopao ka uru ki te RCBO ki nga Waea Ora me te tika.
  4. Whakapirihia te tapanga Ora e hono ana ki runga RCBO.
  5. Whakatuwheratia te Uwhi Uwhi Paetukutuku e whakaatu ana i nga kaikawe i roto, penei i te Whakaahua 25.
  6. Ki te tuwhera te pouaka, whakauruhia nga tohu kaikawe i raro o te Pouaka Paopao ki roto i te Piki-atu ka pana totika ki roto i te Paeahi. Ka paato te Pouaka Paopao ki te waahi. Tiaki Tiaki: Me whakarite kua whakairihia te Pouaka Tapa-atu kia rite te kakau ki te taha o te Uwhi Tap-atu e pa ana ki nga kaikawe.
  7. Tango (ng) patoto mai i te taupoki o te Pouaka Paopao kia kitea te RCBO, kati te taupoki me te raka.
    pod-POINT-1-0-Solo-3-Array-Circuit- (1)
  8. Whakauruhia te waea hiri ki roto i nga rua i te taha o te raka o te Pouaka Paopao. Horoihia ki roto i te ferrule (me tag mehemea ka whakaratohia). Whakahokia ano me te raka takahuri, penei i te Whakaahua 28.

Hononga Tohu

Stage 2

Wāhanga 1: Te Hononga Tohu ki te Pouaka-atu me te Uera Raraunga

TE WHAKAMAHI! Voltage – Kaua rawa e mahia he whakarereketanga kore mana ki nga waahanga o roto o tenei hua. Me whakarite kia wehea, kia maukatihia te tuku ki te Array Circuit i mua i te whakahaerenga o nga mahi whakauru me te tiaki.

  1. Tautuhia te EV Charging Bay ki te waahi ka noho/kua whakaurua te Chargepoint me te Pouaka Raraunga e pa ana.
  2. Tautuhia te Pouaka Tapa-atu. Koinei te mea tino tata, ki te kore e arai te huarahi.
    WHAKATŪPATO: Me whakaweto te hiko me te mate i mua i te whakauru.
  3. Tapahia te pouaka hiri waea hiri, ka whangaia te Kaituku ki te taura Waea ma te repe taha ki roto i te Pouaka Tapa-atu. Hangaia he kohao repe ina tika.
  4. Tapahia nga taura Neutral, Ora me te Whenua kia roa, ka uru ki o raatau pito e rite ana ki te RCBO me te Earth Stud, penei i te Whakaahua 29.Whakaatu 29. Pouaka Paopao me te L2 e hono ana ki te RCBO
  5. Whangaia te Waea Raraunga ki te Pouaka Raraunga ma te patoto tika.
  6. Wewetehia me te whakauru i te Waitohu me te Papa e tau mai ana ki roto i nga poraka tauranga-3 ara, pera i te Whakaahua 30.
    1. Care point 1: Ensure the each terminal block contains exclusively Signal or Ground cables, with no cross-contamination.
    2. Tiaki Tiaki 2: Me whakauru nga taura katoa ki te taha o te arai waea, pera i nga whakaahua.
  7. Wewetehia me te whakauru i te Waitohu putaatu me te Papa ki roto i nga poraka tauranga rua-ara. Me whakakiia ia poraka ki nga taura Tohu, ki te whenua ranei e kitea ana i te Whakaahua 2.pod-POINT-1-0-Solo-3-Array-Circuit- (32)Whakaahua 31. Ko nga taura Raraunga Putaatu me te mea kua whakauruhia ki tetahi waahanga, ka whakaatu anake i te waahanga takirua o nga Waea Raraunga kia marama. pod-POINT-1-0-Solo-3-Array-Circuit- (33)Whakaahua 32. Nga taura Raraunga taumai me te puta atu i honoa ki nga tauranga 3 me te 2 tauera
    Tiaki Tiaki: Me whakauru nga taura katoa ki te taha o te arai waea, pera i nga whakaahua.
  8. Whangaia nga taura Raraunga e rua ki te Tohu Tohu ma te patuki tika i roto i te Pouaka Raraunga. Tapanga tika, ara, “1-L1 IN”, “1-L2 OUT”.
  9. Fit the Data cable to the Chargepoint into the incoming 3-lever terminals, as shown in Figure 33.pod-POINT-1-0-Solo-3-Array-Circuit- (34)Whakaatu 33. Tauera Raraunga ki te Tohu Tohu kua whakauruhia ki nga pito 3-lever
    Tiaki Tiaki: Me whakarite he rite tonu te taura Raraunga e paopaohia ana ki te Live kua whakauruhia ki te Pouaka Paopao.
    Whakauruhia te taura Raraunga mai i te Tohu Tohu ki roto i nga kapeka 2-tuaka puta, pera i te Whakaahua 34. pod-POINT-1-0-Solo-3-Array-Circuit- (35)Tiaki Tiaki: Kia tika te tapanga o nga taura Raraunga katoa.
  10. Whakauruhia nga waea katoa me nga paraka kati ki roto i te Pouaka Raraunga, penei i te Whakaaturanga 35.pod-POINT-1-0-Solo-3-Array-Circuit- (36)
  11. Kia uru ki te wae tuarua, tuaruatia nga taahiraa 2.1.5. ki te 2.1.9., te whakamahi i te huinga tuarua o nga poraka kapeka me te patoto motuhake.
  12. Whakauruhia nga waea katoa me nga paraka kati ki roto i te Pouaka Raraunga, penei i te Whakaaturanga 36. pod-POINT-1-0-Solo-3-Array-Circuit- (37)
  13. Whakauruhia te waea hiri ki roto i nga rua i te taha o te raka o te Pouaka Paopao. Horoihia ki roto i te ferrule (me tag mehemea ka whakaratohia). Whakahokia ano me te raka takahuri, penei i te Whakaahua 37. pod-POINT-1-0-Solo-3-Array-Circuit- (38)
  14. Ko te Tukunga ki te Waehere taura me te Waea Raraunga e hono tika ana ki te Puhi Puhi me te Poari Toha. Inaianei kei te haere tonu te whakaurunga i runga i nga aratohu mo te Whakataunga a-whare mai i tenei taahiraa. Tirohia te Whakaahua 38 hei tohutoro.

pod-POINT-1-0-Solo-3-Array-Circuit- (39)

Te Whakamatau me te Whakataunga

Stage 3
Wāhanga 1: Whakamātautau me te Komihana o mua

Te whakamatautau hiko
I te otinga o te whakaurunga o te Array Circuit, me whakahaere e te kaitautauta he manatoko tuatahi me te whakamatautau i te(ng)ahikohiko tuku me te ara iahiko / pae pahi whakamutunga i whakatakotoria i roto i te BS 7671. Me tuku te tiwhikete ki te kiritaki ina oti te whakaurunga.

Tuhinga o mua
Tirotiro kanohi te whakaurunga Array Circuit ki te whakarite:

  • Ko nga papa tohatoha Array Circuit kua mau tonu, kua mau tonu nga tohu IP
  • Kua mau te pae pahi me nga uhi tap-atu katoa kua mau ki te turanga
  • Ka mau te pupuri taura me nga taupoki ki te waahi e tika ana
  • Ko nga taura katoa he pai te repe ka tiakina
  • Karekau he kino ki nga kaikawe tuku, ki te pae pahi ranei
  • Ko nga waahanga tuku me nga waahanga whakamutunga ka tohua ki te waahi tohatoha
  • Kua whakauruhia nga tapanga whakatupato ki nga waahi e hiahiatia ana
  • Kua tautuhia, kua tapaina hoki nga taura raraunga
  • Ko nga tohu hononga raraunga kua whakatauhia me nga taupoki kua whakauruhia ki nga waahi e hiahiatia ana

Ko te punaha Array Circuit ka taea te whakakaha kia rite mo te tono.

Wāhanga 2: Komihana

Whakatu:
I mua i te tiimata o te whakamatautau i te punaha Array, me hono nga riihi Solo takitahi ki te tuku me te whakamatautau hiko (Ze, Zs etc.). I muri i tenei tukanga me hono ia Solo ki Wi-Fi (tirohia nga tohutohu kei roto i te pouaka mo tenei tukanga). Ko te whakaurunga o nga waeine e hiahia ana ki te nama PG o ia Solo me te nui rawa o te toha kua tohaina e te poari tohatoha matua ki a ia.

Ko te tukanga tono ka toha ki ia Solo te nui rawa o nga taonga e waatea ana, katahi ka tangohia nga raraunga tuku ki ia Solo ka penapena ki roto i ona mahara kore-kore. I te mea e 5 meneti te roa o tenei mahi, me mahi nga wae katoa i te wa kotahi. Kia mahara: i te wa i whakapumautia ai te Wi-Fi me te hononga ipurangi ka marama te rama tuunga Solo i te Kahurangi me te uira Mawhero (Kaore e taea te tono nga riihi takitahi me nga rama ma).

pod-POINT-1-0-Solo-3-Array-Circuit- (40)Mā mārō
Ko te Solo kaore he tohu Wi-Fi, he uru whatunga ranei

pod-POINT-1-0-Solo-3-Array-Circuit- (41)He Kahurangi/Mawhero
Kei te whakawhitiwhiti te waahanga me te Pod Point. (Taurangi noa)

Whai muri i te komihana a-ipurangi o nga Kaitono Ataata Solo katoa, ka taea te whakahaere i tetahi whakapumautanga kei te whiwhi raraunga te katoa mai i nga Kaiwhakahaere Array.

  1. Tirohia nga kaitoro Solo katoa e tohu ana i te mahi noa (Kanarangi/Mawhero). Ko nga wae e tohu ana he LED mana Whero me tirotiro kia tika te whakauru me te whakatika i nga taura.
  2. Whai muri i te whakaū kei te pai katoa, whakawetohia te tuku ki te papa whakahaere Array (2A MCB).
  3. Ko nga kaitarai Solo katoa me hapa (LED whero), e whakau ana i te mahi a Array.

Whakahokia te MCB, kia ora a Solo ka hoki ki te ahua o te ahua.

pod-POINT-1-0-Solo-3-Array-Circuit- (42)

Nga Kaitohu Solo mo ia wahanga hiko
Tata ki te Atete teitei i te putanga Huanga (Ohms) 1 2 3 4 5 6 7 8 9
103 53 36 29 24 19 17 15 14

 Takina hapa o te punaha Array:

  • Mena kei te hapa etahi, te katoa ranei o nga kaitarai a Solo i muri i te tono (Red LED), tirohia te 12VDC i te putanga o te hiko i roto i te Array controller, mena he iti iho, wehea nga whangai 12V ki ia waahanga Array kia mohio ai mena he nui te utaina kei te whakaiti i te tuku 12V.
  • Mena ka kitea he kotahi, neke atu ranei kei te whakaiti i te tuku, tirohia te parenga o nga putanga (ng) o nga tauranga kōwae Array (kua whakawetohia te 12V PSU), nga parenga angamaheni kua hoatu i runga ake nei.
  • Mena he iti ake te panui i te mea e tumanakohia ana ka tohu he ara iahiko poto i runga i te taura raraunga, kua pohehe ranei tetahi o nga riihini a Solo (he tohu tohu me nga tohu whenua kua hurihia), mena ka tino teitei ake te parenga ka tohu he ara iahiko tuwhera tetahi ranei o nga pito kei roto i te Solo kaore i te tika te hono ki te taura raraunga (ko tenei rahunga ka pa ki te kotahi, ki te 2 noa nga waahanga).
  • Mena DC voltagkei te pai nga mahi me nga parenga - te whakapae he kowae Array hapa.
  • pod-POINT-1-0-Solo-3-Array-Circuit- (43)Tohutohu PSU pūmana huānga lamp (noa).

Maama mana takitahi 

pod-POINT-1-0-Solo-3-Array-Circuit- (43)

pod-POINT-1-0-Solo-3-Array-Circuit- (45)

Wāhanga 3: Tiaki

Te tiaki
Ko te Array Circuit me tiaki tonu kia noho haumaru mo te whakamahi tonu me te noho roa. Ma te Pod Point anake nga mahi tiaki.

  • Pod Point recommends that RCDs fitted within the Array Circuit installation should be manually checked for operation every 6 months in line with recommendations within BS 7671.
  • E taunaki ana a Pod Point kia tirohia te Array Circuit me te whakamatautau i te iti rawa ia 12 marama, ma enei arowhai ka mahi nga taputapu haumaru o roto.
  • I nga waahi whakamahi tiketike rawa, e taunaki ana kia whakahekehia te auau tirotiro ki nga marama 6, ka riro ma te kaitautauta te kawenga ki te aromatawai i te whakaritenga ki te tirotiro i nga wa katoa atu i nga marama 12.

Hei whakarite i tetahi haerenga ratonga, tena koa whakapā mai ma te: www.pod-point.com/contact

Array Circuit 1.0 Tāuta aratohu

FAQ

  • Q: Who should install the Array Circuit 1.0 – Solo 3?
    A: Ko te hua me whakauru anake e nga tangata whai tohu me nga tangata mohio.
  • Q: Ka taea te hua tampi mahia i muri i te whakaurunga?
    A: Kao, kaua e whakatuwherahia te Array Circuit, nekehia, whakarereketia, pokanoa ranei i muri i te whakaurunga hei whakarite i te mana o te haumaru me te whakamana.

Tuhinga / Rauemi

pod POINT 1.0-Solo-3 Array Circuit [pdf] Aratohu Tāuta
1.0-Solo-3, 1.0-Solo-3 Array Circuit, 1.0-Solo-3, Array Circuit, Circuit

Tohutoro

Waiho he korero

Ka kore e whakaputaina to wahitau imeera. Kua tohua nga mara e hiahiatia ana *