PRODVX APPC-10XPL Poe arahina Android Touch Whakaatu Aratohu Kaiwhakamahi

Tangohia nga mea i roto i te pouaka me te whakarite kei te noho nga waahanga katoa.
Install the wall/glass mount or desk stand following the designated mount/stand manual instructions. Use a manual screwdriver instead of power tools to prevent damage to the device.

Connect the device to power via PoE+ or a power adapter (optional accessory).
Tūhono ki te Ipurangi mā LAN, Wi-Fi rānei.
Configure the ProDVX device for your production environment.

Kei roto i tenei kohinga

Me pehea te tiimata

Hipanga 1: Take the contents out of the box, and make sure all components are present.

Hipanga 2: Install the wall/glass mount or desk stand, and check the designated mount/stand manual for instructions. We strongly advise using a manual screwdriver instead of power tools due to the risk of causing damage to the device.
Hipanga 3: Connect to power via PoE+ or power adapter (optional accessory).

Hipanga 4: Tūhono ki te Ipurangi mā LAN, Wi-Fi rānei.
Hipanga 5: Configure the ProDVX device for your production environment.

IOverview

Start and configure the ProDVX device.

Hipanga 1: Power On
Power on the device by connecting either: PoE+ cable or a Power adapter
Hipanga 2: Whirihoranga Tuatahi
Kōwhiria tētahi o ngā tikanga whirihoranga e whai ake nei:
- A. Skip Wizard
  All configuration elements and additional features will remain in their disabled/default state.
- B. Network Setup
  - Configure the Network connection from the start.
  - Tuhipoka: Ethernet connection must be disabled to use Wi-Fi.
- C. Upload Configuration
  Upload a pre-defined configuration in JSON format.
- D. Ruānuku Tīmata
  - Proceed through the wizard to configure ProDVX features.
  - Set screen sleep interval, or Default for automatic sleep after 30 minutes of inactivity (EcoDesign).
Step 3: Apply Configuration
Once the configuration is complete, the device will automatically reboot to apply the changes.

Step 4: Additional Setup (if applicable)
- Configure IEEE 802.1X for LAN or Wi-Fi connection.
- Tāuta me te whirihora i nga tono pai.

Ko nga taputapu whiriwhiri

PANUI FCC

Tupato:
Please note this product contains a battery. Please return the product to a certified repair center for proper replacement of the battery. Disposal of a battery can be dangerous.
WHAKATŪPATO:
Ko nga huringa me nga whakarereketanga ki tenei waahanga kaore i tino whakaaehia e te roopu kawenga mo te hanganga ture ka kore te mana o te kaiwhakamahi ki te whakahaere i nga taputapu.
FAKATOKANGA:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area can cause harmful interference, in which case the user will be required to correct the interference at his own expense.
Ka tutuki tenei taputapu ki te Wahanga 15 o nga Ture FCC. Ko te mahi i raro i nga tikanga e rua e whai ake nei:

Kare pea tenei taputapu e whakararu kino
me whakaae tenei taputapu ki nga wawaotanga ka tae mai, tae atu ki te pokanoa ka puta he mahi kore.

Europe/UK – EU/UK Whakapuakanga Whakaaetanga
This device complies with the essential requirements of the Radio Equipment Directive (2014/53/EU). The following test methods have been applied in order to prove the presumption of conformity with the essential requirements of the Radio Equipment Directive. This equipment is compliant with Class A of EN55032. In a residential environment ment this equipment may cause radio interference.

Te Whakakore Tika i tenei hua.

Ko tenei tohu e tohu ana kia kaua tenei hua e tukuna ki etahi atu para (whare) Hei aukati i te kino ki te taiao me te hauora tangata mai i te tuunga para kore whakahaere, hangarua i runga i te kawenga ki te whakatairanga i te whakamahinga toiwhiu o nga rawa rawa. Hei whakahoki mai i to taputapu kua whakamahia, whakamahia te punaha whakahoki me te kohikohi me te whakapiri atu ranei ki te kaihoko i hokona mai ai te hua. Ka taea e ratou te tango i tenei hua mo te hangarua haumaru taiao.
FCC & CE RF Radiation Exposure Statement Caution: To maintain compliance with the FCC & CE’s RF exposure guidelines, place the product at least 20cm from nearby persons.”

The suitable temperature for the ProDVX Display and accessories is 0°C-40°C. Please note that using the device at temperatures above or below the specified range is not permitted.

FAQ

Me aha ahau ki te wera rawa te taputapu?

Make sure the device is mounted correctly on a wall or surface as recommended. Avoid using it on a flat horizontal surface to prevent heat entrapment.

How can I dispose of the battery in the product?

Please return the product to a certified repair center for proper replacement of the battery. Battery disposal can be dangerous and should be handled with care.

Can I use power tools to attach the device to the mount or stand?

It is preferred not to use power tools as they may cause damage to the device. Please use a manual screwdriver for installation.

Tuhinga / Rauemi

PRODVX APPC-10XPL Poe LED Whakaaturanga Paa Android [pdf] Aratohu Kaiwhakamahi
APPC-10XPL Poe LED Whakaaturanga Paa Android, APPC-10XPL, Poe LED Whakaaturanga Paa Android, Whakaaturanga Paa Android, Whakaaturanga Paa

Tohutoro

Pukapuka Kaiwhakamahi

PRODVX APPC-10XPL Poe LED Whakaaturanga Paa Android

Whakatakotoranga Hua

Nga Tohutohu Whakamahi Hua