AKI-Raarangi Whakauru Hoe Wira Rere Meter Sensor
“
Nga korero hua
Whakatakotoranga:
- Awhe Mahi: 0.1 ki te 10 m/s
- Awhe Rahi Paipa: DN15 ki DN600
- Tuuturu: Ka whakaratohia
- Te Tukurua: Ka whakaratohia
- Rauemi Makuku: PVC (Dark), PP (Pigmented),
PVDF (Natural), 316SS, FKM, EPDM, FFKM, Zirconium Ceramic
(ZrO2) - Hangarau: Frequency – 49 Hz per m/s nominal,
15 Hz per ft/s nominal, Supply Voltage – Provided, Supply Current –
Ka whakaratohia
Nga Tohutohu Whakamahi Hua:
Mōhiohio Haumaru:
Before using the unit, ensure you de-pressurize and vent the
pūnaha. Whakaaetia te hototahi matū kia kaua e neke ake i te teitei
temperature or pressure specifications. Always wear safety goggles
during installation. Do not alter the product construction.
Tāutatanga:
Hand tighten the unit to avoid damaging product threads. Do not
use tools during installation to prevent any damages.
Taputapu Tiaki Whaiaro (PPE):
Take caution with pressurized systems and ensure to vent the
system before installation or removal to prevent equipment damage
whara ranei.
Whakaahuatanga Hua:
- Te Paanga Nui NEMA 4X Whakapiri
- Vivid LED Display for Flow and Total
- Flow Rate and Total Display
- Pulse and RS485 Outputs (Optional)
- M12 Quick Connection with True Union Design
- Zirconium Ceramic Rotor and Bushings for increased wear
ātete
FAQ:
Q: What should I do if the unit is under pressure?
A: Vent the system prior to installation or
removal to avoid equipment damage or injury.
Q: Ka taea e au te whakamahi i nga taputapu i te wa e whakauruhia ana?
A: It is advised not to use tools as it may
damage the product beyond repair and void the warranty.
Q: How do I avoid damaging the product threads?
A: Hand tighten the unit to prevent
over-tightening that may lead to thread damage.
“`
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
Tohu Panui Tere
Me ata panui te pukapuka a te kaiwhakamahi i mua i te tiimata ki te whakamahi i te waahanga. Ka whai mana te Kaihanga ki te whakatinana i nga huringa me te kore panui i mua.
24-0500 © Icon Process Controls Ltd.
1
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
Nga korero haumaru
Whakakorehia te pehanga me te punaha hau i mua i te whakaurunga me te tango Whakapumautia te hototahitanga matū i mua i te whakamahi KAUA e neke ake i te teitei o te pāmahana, te pehanga ranei nga whakaritenga KAUPAPA KAUPAPA KAUPAPA KAUPAPA haumaru me te whakangungu kanohi i te wa o te whakauru me te ratonga KAUA e whakarereketia te hanga hua
Whakatupato | Tupato | mōrearea
He tohu morearea pea. Ki te kore e whai i nga whakatupato katoa ka pa mai pea te kino o nga taputapu, te whara, te mate ranei.
Ringa Whakaiti anake
Ki runga ake i te whakamaatanga ka pakaru tonu nga miro o nga hua me te kore o te nati pupuri.
Tuhipoka | Nga Panui Hangarau
Ka whakanui i nga korero taapiri, i nga tikanga taipitopito ranei.
Kaua e Whakamahi Utauta
Ko te whakamahi i nga taputapu ka kino pea ka mahia i tua atu i te whakatikatika me te whakakore i te raihana hua.
WHAKATOKANGA
Taputapu Tiaki Whaiaro (PPE)
Whakamahia i nga wa katoa te PPE tino tika i te wa e whakauru ana me te ratonga o nga hua Truflo®.
Whakatupato Pūnaha Whakanuia
Kei raro pea te pūoko i te pehanga. Kia tupato ki te punaha hau i mua i te whakaurunga, te tango ranei. Ki te kore e pera, ka pakaru pea nga taputapu me te whara kino/ranei.
24-0500 © Icon Process Controls Ltd.
2
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
Whakaahuatanga Hua
Ko te TI Series whakaurunga kirihou hoe i te mita rere wira kua hangaia hei whakarato i te ine rerenga tika mo te wa roa i roto i nga tono ahumahi uaua. Kei roto i te hui wira hoe he hoe Tefzel® me te zirconium ceramic rotor pin me nga bushings. Ko nga rauemi Tefzel® me te Zirconium tino mahi kua tohua na te pai o o raatau matū me nga taonga whakakakahu.
*
Tītaka 330° *Kōwhiringa
Te Paanga Nui NEMA 4X Whakapiri
TIP Thermal Plastic
Whakaaturanga Aarama Maama
(Rere me te Tapeke)
Ngā āhuatanga
? ½” 24″ Line Sizes
? Flow Rate | Total
? Pulse | RS485 Outputs (Optional)
TI3P 316 SS
Hoahoa Hou ShearPro®
? Pro Rere Whakaahuafile ? Pokarekare Whakahekea = Whakanuia te Roa ? 78% He iti ake te Toia i te Hoahoa Hoe Papatahi Tawhito*
*Ref: NASA "Whakaahua Hanga ki te Toia"
Tefzel® Paddle Wheel ? Te Matū Nui me te Whakaaetanga Wear vs PVDF
M12 Hononga Tere
Hoahoa Kotahitanga Pono
ki te hoe Flat
Zirconium Ceramic Rotor | Ngaherehere
? Tae atu ki te 15x te Atete Wear? Ko nga Rotor Bushings Whakaitihia te mau
me te ahotea ngenge
360º Hoahoa Rotor Parekura
? Ka whakakorehia te horahanga maihao? Kore Nga Hoe Ngaro
TIP Thermal Plastic
TI3P 316 SS
ki te whakataetae
24-0500 © Icon Process Controls Ltd.
3
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
Whakatakotoranga Hangarau
Whānui
Awhe Whakahaere Rahi Paipa Awhe Linearity Repeatability
0.3 ki te 33 ft/s ½ ki te 24″ ±0.5% o FS @ 25°C | 77°F ±0.5% o FS @ 25°C | 77°F
0.1 ki te 10 m/s DN15 ki DN600
Rauemi Makuku
Sensor Body O-Rings
PVC (Dark) | PP (Pigmented) | PVDF (Natural) | 316SS FKM | EPDM* | FFKM*
Rotor Pin | Ngaherehere
Zirconium Ceramic | ZrO2
hoe | Rotoru
ETFE Tefzel®
Hiko
Auautanga
49 Hz ia m/s ingoa
15 Hz ia ft/s nominal
Tukuna Voltage
10-30 VDC ± 10% kua whakaritea
Whakawhiwhinga o naianei
<1.5 mA @ 3.3 ki te 6 VDC
<20 mA @ 6 ki te 24 VDC
Max. Paerewa Whakatauranga Pawera/Pēhanga me te Pūoko Whakauru | Huri-kore
PVC
180 Psi @ 68°F | 40 Psi @ 140°F
12.5 Pae @ 20°C | 2.7 Pae @ 60°F
PP
180 Psi @ 68°F | 40 Psi @ 190°F
12.5 Pae @ 20°C | 2.7 Pae @ 88°F
PVDF
200 Psi @ 68°F | 40 Psi @ 240°F
14 Pae @ 20°C | 2.7 Pae @ 115°F
316SS
Whakaarohia te wheketere
Te Waahi Mahi
PVC
32°F ki te 140°F
0°C ki te 60°C
PP PVDF
-4°F ki te 190°F -40°F ki te 240°F
-20°C ki te 88°C -40°C ki te 115°C
316SS
-40°F ki te 300°F
-40°C ki te 148°C
Putanga
Pulse | RS485*
Whakaatu
LED | Rere Rere + Rere Totalizer
Nga Paerewa me nga Whakaaetanga
CE | FCC | RoHS Ture
Tirohia nga Kauwhata Pawera me te Peehanga mo etahi atu korero
* Kōwhiringa
Kōwhiringa Tauira
PVC | PP | PVDF
Rahi ½” – 4″ 6″ – 24″ 1″ – 4″ 6″ – 24″ 1″ – 4″ 6″ – 24″
Part Number TIP-P-S TIP-P-L TIP-PP-S TIP-PP-L TIP-PF-S TIP-PF-L
Rauemi PVC PVC PP PP PVDF PVDF
Taapirihia te `E' – Hiri EPDM
`R’ – RS485 Communication Output
316 SS
Rahi ½” – 4″ 6″ – 24″
Part Number TI3P-SS-S TI3P-SS-L
Rauemi 316 SS 316 SS
Taapirihia te `E' – Hiri EPDM
`R’ – RS485 Communication Output
24-0500 © Icon Process Controls Ltd.
4
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
Whakaatuhia nga ahuatanga
Whakaaturanga LED
Rere Tapeke
Waehe kua tohua
Tirohia te Wh.10 mo nga taipitopito
M12 Hononga
Ahu (mm)
Rere Rere
Waeine | Tohu Huaputa
91.7
91.7
106.4 210.0
179.0
24-0500 © Icon Process Controls Ltd.
5
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
Hoahoa Waea
1 7
8
2 3
6
4
5
Taumata 1 2 3 4 5 6
M12 Uea Wahine
Description 10~30 VDC Pulse Output
– VDC Pulse Output
RS485A RS485B
Brown | 10~30VDC Black | Pulse Output (OP2) White | Pulse Output (OP1) Grey | RS485B Blue | -VDC Yellow | RS485A
Tae Paraone Ma
Kahurangi Pango Kowhai Kerei
Waeaea – SSR* (Totalizer)
Tautuhia te "Con n" ki te Mana Putanga Putanga (Tirohia te Papatonotanga Mana Pulse, Wharangi 11)
Tae Waea Brown White Blue
Whakaahuatanga + 10~30VDC Pulse Putanga
-VDC * SSR – Rere Whenua Toka
Waea Waea – One Pulse/Gal | Con E
Tautuhia te "Con E" ki te Mana Putanga Putanga (Tirohia te Papatonotanga Mana Pulse, Wharangi 11)
Tae Waea Brown White Blue
Whakaahuatanga + 10~30VDC Pulse Putanga
-VDC
Waeaea – SSR* (Rere Rere)
Set any “Con” in Pulse Output Control (Refer Pulse Control Programmming, Page 11)
Tae Waea Paraone Pango Kahurangi
Whakaahuatanga + 10~30VDC Pulse Putanga
-VDC * SSR – Rere Whenua Toka
Waea - Ki te Whakaatu Rere | Con F
Tautuhia te "Con F" ki te Mana Putanga Putanga (Tirohia te Papatonotanga Mana Pulse, Wharangi 11)
Tae Waea Brown White Blue
Whakaahuatanga + 10~30VDC Paddle Pulse
-VDC
24-0500 © Icon Process Controls Ltd.
6
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
Tāutatanga
Pupuri Pupuri
Tino Hiranga
Whakahinuhinu O-mowhiti ki te whakahinuhinu viscous, hototahi ki nga rauemi o te hanga.
Ma te whakamahi i te | korikori nekehanga, āta whakahekehia te pūoko ki roto i te taputapu. | Kaua e Whakahau | Fig-3
Whakaritea te ripa | he whakarara te kakari ki te ahunga rere | Fig-4
Ringihia te potae pūoko. KAUA e whakamahi taputapu i runga i te potae puoro, ka pakaru ranei nga miro potae me nga miro whakauru. | Fig-5
Whakahinuhinu ki te silicone i roto o te whakauru whakauru
Piki – 1
Piki – 2
Pupuri Pupuri
Paipa Tukatuka Rere
Piki – 3
Kimi Pin
Me whakarite he pai te whakahinuhinu o nga mowhiti O Notch
1¼” G
Pūoko Blade Me whakarite he whakarara te ripa ki te ahunga rere
Fig – 4 Runga View
Te Turanga Pūoko Tika
0011
Ripa
Kaniwha
TINO NUI Whakanuia nga mowhiti-O me te whakahinuhinu 02 kakahore, he hototahi ki te punaha 03
Piki – 5
Kaniwha
Whakapaia te ringa ma te whakamahi i te potae pupuri
KAUA e whakamahia te whakaaturanga hei whakatiki
Kimihia te ripa whakatakotoranga mita rere me te clamp kakari nohoanga.
24-0500 © Icon Process Controls Ltd.
Whakauruhia tetahi miro o te potae pūoko, ka huri i te pūoko kia noho te ripa tīaroaro ki te kakari tika. Me whakarite he whakarara te ripa ki te ahunga rere.
· Ringihia te potae tīwiri · KAUA e whakamahi taputapu - ka taea e nga miro
kia pakaru · Me whakarite kia mau tonu te mita
7
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
Tika te Tatūnga Turanga Pūoko
Ko nga mita rere o te raupapa TI e ine ana i nga purongo wai anake. Kaua he mirumiru hau, me noho tonu te paipa kia ki tonu. Kia tika ai te inenga rere, me u tonu te whakanohonga o nga mita rere ki nga tawhā motuhake. Me whai paipa rere torotika me te iti rawa o nga diameter paipa te tawhiti ki runga me raro o te pukoro rere.
Flange
Kouru
Putanga
2x 90º Tuke
Kouru
Putanga
Whakaiti
Kouru
Putanga
10xID
5xID
25xID
5xID
15xID
5xID
90º Rere Whakararo
90º Tuke Whakararo Rere Whakarunga
Kouru
Putanga
Kouru
Putanga
Pooro Pooro
Kouru
Putanga
40xID
5xID
Tūnga Tāuta
Whakaahua - 1
20xID
5xID
Whakaahua - 2
50xID
5xID
Whakaahua - 3
He pai mena karekau he parapara
He pai mena karekau he mirumiru hau
*Mōrahi % o te totoka: 10% me te rahi matūriki kaua e neke atu i te 0.5mm te waahanga whiti, te roa ranei
He pai ake te whakauru mena he parapara*, he mirumiru AIR ranei
kei reira pea
24-0500 © Icon Process Controls Ltd.
8
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
Whakapaipai me te K-Factor
WHAKAMAHI TEE
CLAMP-I RUNGA SADDLES
CPVC SOCKET WELD-ON ADAPTER
Tee Whakauru
IN
DN
½” (V1) 15
½” (V2) 15
¾”
20
1″
25
1½”
40
2″
50
2½”
65
3″
80
4″
100
K-Factor
LPM
156.1 267.6 160.0 108.0 37.0 21.6 14.4
9.3 5.2
GPM
593.0 1013.0 604.0 408.0 140.0
81.7 54.4 35.0 19.8
Pūoko Roa
SSSSSLLLL
WHAKAMAHI TEE (V2)
Rahi
½” ¾” 1″ 1½” 2″
K-Factor
282.0 196.0 136.0 43.2 23.2
Te Taumaha vs. Te Taumata
Pae Psi 15.2 220
= PVC
= PP
13.8 200
12.4 180
11.0 160
9.7 140
8.3 120
6.9 100
5.5 80
4.1 60
2.8 40
1.4 20
00
° F 60
104
140
175
° C 20
40
60
80
= PVDF
212
248
100
120
Tuhipoka: I te wa e hoahoa ana te punaha me whai whakaaro nga korero mo nga waahanga katoa. | Huri-kore
Clamp Potae
K-Factor
IN
DN
LPM GPM
2″
50
21.6
81.7
3″
80
9.3
35.0
4″
100
5.2
19.8
6″
150
2.4
9.2
8″
200
1.4
5.2
Pūoko Roa
SSSLL
Rotates 330°*
PVC PP PVDF
316SS
* Kōwhiringa
Weld On Adapter
IN
DN
2″
50
2½”
65
3″
80
4″
100
6″
150
8″
200
10″
250
12″
300
14″
400
16″
500
18″
600
20″
800
24″
1000
K-Factor
LPM
14.4 9.3 9.3 5.2 2.4 1.4 0.91 0.65 0.5 0.4 0.3 0.23 0.16
GPM
54.4 35.5 35.0 19.8 9.2 5.2 3.4 2.5 1.8 1.4 1.1 0.9 0.6
Pūoko Roa
SSSSLLLLLLLLLL
Rere Rere Min/Max
Rahi Paipa (OD)
½” | DN15 ¾” | DN20 1″ | DN25 1 ½” | DN40 2″ | DN50 2 ½” | DN60 3″ | DN80 4″ | DN100 6″ | DN150 8″ | DN200
LPM | GPM LPM | GPM
0.3m/s min. 10m/s mōrahi
3.5 | 1.0
120.0 | 32.0
5.0 | 1.5
170.0 | 45.0
9.0 | 2.5
300.0 | 79.0
25.0 | 6.5
850.0 | 225.0
40.0 | 10.5 1350.0 | 357.0
60.0 | 16.0 1850.0 | 357.0
90.0 | 24.0 2800.0 | 739.0
125.0 | 33.0 4350.0 | 1149.0
230.0 | 60.0 7590.0 | 1997.0 315.0 | 82.0 10395.0 | 2735.0
316SS PC
PVC
PP PVDF
24-0500 © Icon Process Controls Ltd.
9
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
Papatonotanga
NGA HAHI
1
Mata Kainga
+
3 Sek.
2
Maukati
3
Wae Rere
4
K Tauwehe
Tīpakohia / Tiaki / Haere tonu
WHAKAATU
Nuku te Whiriwhiringa ki Mauī
WHAKAMAHI
Mata Kainga
Huri Uara Mati
Tautuhinga Maukati wheketere Taunoa: Lk = 10 Ki te kore ka uru te mita ki te Aratau Maukati*
Flow Unit Ut.1 = Gallons (Factory Default) Ut.0 = Liters | Ut.2 = Kiloliters
Uara Factor K Whakauruhia te uara Factor K i runga i te rahi o te paipa. Tirohia te Wharangi 9 mo nga Uara K-Factor
Tautuhi Tepe Putanga (SSR*)
Tīpakohia / Tiaki / Haere tonu
Nuku te Whiriwhiringa ki Mauī
NGA HAHI
WHAKAATU
1
Mata Kainga
Mata Kainga
WHAKAMAHI
Huri Uara Mati
Uara o naianei (CV) Tautuhi Uara (SV)
2 Rere Rere Puta Puta (OP1) 3 Putanga Pulse Tapeke (OP2)
Flow Rate Pulse Output (OP1) Limit Enter Flow Rate Pulse Output Value CV SV : Flow Rate Output (OP1) ON CV < SV : Flow Rate Output (OP1) OFF
Tirohia te Wharangi 6 mo te Waea SSR*
Totalizer Pulse Output (OP2) Limit Enter Totalizer Pulse Output Value CV SV : Totalizer Output (OP2) ON CV < SV : Totalizer Output (OP2) OFF Note: Refer Pulse Control Programming (Pg 11)
Tirohia te Wharangi 6 mo te Waea SSR*
*SSR – Rere Whenua Toka
24-0500 © Icon Process Controls Ltd.
10
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
Papatono Mana Pulse
Tīpakohia / Tiaki / Haere tonu
Nuku te Whiriwhiringa ki Mauī
Huri Uara Mati
NGA HAHI
WHAKAATU
1
Mata Kainga
3 Sek.
Mata Kainga
WHAKAMAHI
2
Mana Putanga Putu
3 OP2 Tautuhi Aunoa Wā Taarua
4
Tautuhinga Aratau Whakaoho
Purse Putanga Mana Con = n : OP2 Tautuhi A-ringa (Ina Tapeke = Tautuhi Uara (SV)) Con = c | r : OP2 Tautuhi Aunoa i muri i te (t 1) Hekona Con = E : Kotahi Pulse/Gal (Taunoa) Con = F : Paddle Pulse — Frequency Max 5 KHz (Mo TVF)
OP2 Auto Reset Time Delay Factory Default: t 1 = 0.50 | Range: 0 ~ 999.99 Secs (Displayed only when Con r | Con c is selected) Note: OP2 = Totalizer Output
Alarm Mode Setting Factory Default: ALT = 0 | Range: 0 ~ 3 Refer to Alarm Mode Selection
5
Hīterei
Hysterisis Factory Taunoa: HYS = 1.0 | Awhe: 0 ~ 999.9 (He parepare te Hysterisis huri noa i te Ira Tautuhi Papatono)
6 OP1 Te Mana I Te Wa Taaroa
OP1 Power On Time Delay Factory Default: t2 = 20 | Range: 0 ~ 9999 Secs Note: OP1 = Flow Rate Output
Kōwhiringa Aratau Whakaoho
ALt No.
Whakaahuatanga
ALt = 0 CV SV — Rere ON | CV < [SV – Hys] — Rere OFF
ALt = 1 CV SV — Rere ON | CV > [SV + Hys] — Rere OFF
ALt = 2 [SV + Hys] CV [SV – Hys] — Rere ON : CV > [SV + Hys] ranei CV < [SV – Hys] — Relay OFF
ALt = 3 [SV + Hys] CV [SV – Hys] — Rere OFF: CV > [SV + Hys] or CV < [SV – Hys] — Rere ON
Hys = Hysteresis — He rite te mahi hei parepare ± huri noa (OP1) te whakaputanga pupuhi
CV: Uara o naianei (Rere Rere) | SV = Tautuhi Uara
24-0500 © Icon Process Controls Ltd.
11
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
Tautuhi Tautuhi Tapeke
NGA HAHI
1
Mata Kainga
+
3 Sek.
2
Tautuhi Tautuhi Tapeke
WHAKAATU
Mata Kainga
WHAKAMAHI
Ka Tautuhia te Uara Tapeke ki te Kore
Rotor Pin | Whakakapi Hoe
1
Raina te titi ki te kohao
2
Paopao marie
Pin Iti
3
Pato kia 50% te putanga o te titi
Kohao Pin
4
Toia ki waho
5
6
Toia te hoe
Whakauruhia te hoe hou ki te mita rere
7
Pana ki te titi approx. 50%
8
Paopao marie
9
Kia ora! Kua oti te tukanga whakakapi!
Me whakarite kia rite nga rua
24-0500 © Icon Process Controls Ltd.
12
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
Taputapu Tāuta
SA
Clamp-I runga i nga Whakanohonohonoho
· Rauemi PVC · Viton® O-Rings · E waatea ana i roto i te Metric DIN · Ka whakaae ki te Waitohu Momo Rere Meter
Rahi 2″ 3″ 4″ 6″ 8″
PVC
Te waahanga waahanga SA020 SA030 SA040 SA060 SA080
PT | PPT | PFT
Taputapu Tāuta
· PVC | PP | PVDF · Putunga Whakamutunga
Hononga · Ka Whakaaetia te Momo Waitohu
Rere Meter · Hoahoa Hononga Pono
PVDF
PVC
Rahi ½” ¾” 1″ 1½” 2″
Te waahanga waahanga PFT005 PFT007 PFT010 PFT015 PFT020
Te waahanga waahanga PT005 PT007 PT010 PT015 PT020
Taapirihia te Pimuri `E' – Hiri EPDM `T' – Hononga Whakamutunga NPT `B' – Hononga Whakamutunga Whakakotahi Reke mo PP, PVDF ranei
PP
Te waahanga waahanga PPT005 PPT007 PPT010 PPT015 PPT020
SAR
Clamp-I runga i nga Whakanohonoho (SDR Pipe)
· Rauemi PVC · Viton® O-Rings · E waatea ana i roto i te Metric DIN · Ka whakaae ki te Waitohu Momo Rere Meter
Rahi 2″ 3″ 4″ 6″ 8″ 10″ 12″ 14″ 16″
PVC
Nama Wahanga SAR020 SAR030 SAR040 SAR060 SAR080 SAR100 SAR120 SAR140 SAR160
CT
CPVC Tee Whakataunga Whakauru
· 1″-4″ Rahi Paipa · Hewari ki te Tāuta · Ka Whakaaetia a Signet®
Rere Rere
CPVC
Rahi 1″
1 ½” 2″ 3″ 4″
Te nama waahanga CT010 CT015 CT020 CT030 CT040
Taapirihia te Pimuri `E' – Hiri EPDM `T' – Hononga Whakamutunga NPT `B' – Hononga Whakamutunga Whakakotahi Reke mo PP, PVDF ranei
PG
Pūurutau Kāpia-I
· 2″-24″ Rahi Paipa · Hewari ki te Tāuta · Ka Whakaaetia te Tohu Rere a Signet®
Whakapiri-I te urutau CPVC
Rahi
Nama Wahi
2″-4″
PG4
6″-24″
PG24
24-0500 © Icon Process Controls Ltd.
13
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
SWOL
Kaitautoko Weld-On
· 2″-12″ Rahi Paipa · 316SS Weld-o-let with PVDF insert · He ngawari ki te whakauru · Ka whakaae ki te Waitohu Rere Meter
Kaitautoko Weld-On – 316 SS
Size 3″ 4″ 6″ 8″ 10″ 12″
Part Number SWOL3 SWOL4 SWOL6 SWOL8 SWOL10 SWOL12
SST
316SS TI3 Rangatū NPT Tee Fittings
· Ka Whakaaetia te Tohu Rere Momo Momo Signet®
Tee Whakauru Miro – 316 SS
Rahi
Nama Wahi
½” ¾” 1″ 1 ½” 2″ 3″ 4″
SST005 SST007 SST010 SST015 SST020 SST030 SST040
SSS
316SS TI3 Rangatū Taonga Tee Taputapu
· Ka Whakaaetia te Tohu Rere Momo Momo Signet®
Tee Whakapaipai - 316 SS
Rahi
Nama Wahi
½” ¾” 1″ 1 ½” 2″ 3″ 4″
SSS005 SSS007 SSS010 SSS015 SSS020 SSS030 SSS040
SSF
316SS TI3 Rangatū Whakapainga Tee Tee
· Ka Whakaaetia te Tohu Rere Momo Momo Signet®
Tee Tee Fiting - 316 SS
Rahi
Nama Wahi
½ ”
SSF005
¾”
SSF007
1″ 1 ½”
2″ 3″ 4″
SSF010 SSF015 SSF020 SSF030 SSF040
24-0500 © Icon Process Controls Ltd.
14
Truflo® — TIP | TI3P Series
Kōkuhu Hoe Wīra Flow Meter Sensor
Pūtāhui, Whakahoki me te here
Pūtāhui
Ka whakamanahia e Icon Process Controls Ltd ki te kaihoko taketake o ana hua ka kore he kino o nga taonga me nga mahi i raro i te whakamahinga me te ratonga i runga i nga tohutohu i tukuna e Icon Process Controls Ltd mo te wa kotahi tau mai i te ra o te hoko o aua hua. Ko te herenga a Icon Process Controls Ltd i raro i tenei whakamana, he iti noa iho ki te whakatikatika, ki te whakakapi ranei, i te whiringa Icon Process Controls Ltd, o nga hua, waahanga ranei, ka whakatauhia e te tirotiro a Icon Process Controls Ltd ki tona pai ki te he o nga rawa, i nga mahi ranei i roto. te wā pūtāhui. Me whakamohiotia a Icon Process Controls Ltd i runga i nga tohutohu kei raro iho nei mo tetahi kereme i raro i tenei whakamana i roto i nga ra e toru tekau (30) i muri i te kereme kore o te rite o te hua. Ko nga hua kua whakatikahia i raro i tenei raihana ka whakamanahia mo te toenga o te waa whakamana tuatahi. Ko nga hua ka tukuna hei whakakapinga i raro i tenei raihana ka whakamanahia mo te tau kotahi mai i te ra o te whakakapinga.
Ka hoki mai
Kaore e taea te whakahoki mai nga hua ki te Icon Process Controls Ltd me te kore whakamana i mua. Ki te whakahoki i tetahi hua e kiia ana he hapa, haere ki www.iconprocon.com, ka tuku mai he puka tono whakahoki mai a te kaihoko (MRA) ka whai i nga tohutohu kei roto. Ko nga hua whakamana me nga hua kore-purangi ka hoki mai ki Icon Process Controls Ltd me utu tomua me te inihua. Ko te Icon Process Controls Ltd kare he kawenga mo nga hua kua ngaro, kua pakaru ranei i te tuku.
Nga herenga
Kaore tenei raihana e pa ki nga hua e: 1. kei tua atu i te waa whakamana, he hua ranei kaore te kaihoko tuatahi e whai i nga tikanga whakamana.
kua tuhia ki runga ake nei; 2. kua pa ki te kino o te hiko, te miihini, te matū ranei na te kino o te whakamahi, ohorere, koretake ranei; 3. kua whakarereketia, kua whakarereketia ranei; 4. ko tetahi atu i nga kaimahi ratonga kua whakamanahia e Icon Process Controls Ltd kua ngana ki te whakatika; 5. kua uru ki roto i nga aitua, i nga aitua taiao ranei; 6. kua pakaru ranei i te wa e hoki mai ana ki te Icon Process Controls Ltd
Kei a Icon Process Controls Ltd te mana ki te whakakore takitahi i tenei raihana me te tuku i nga hua kua whakahokia ki a Icon Process Controls Ltd kei reira: 1. he taunakitanga kei te taha o te hua he mea morearea; 2. kua noho tonu ranei te hua kaore i keremehia i Icon Process Controls Ltd mo te neke atu i te 30 ra i muri i te Icon Process Controls Ltd
kua tono tika kia tukuna.
Kei roto i tenei raihana te raihana korero kotahi i mahia e Icon Process Controls Ltd e pa ana ki ana hua. KATOA WHAKAMAHI KAUPAPA, KAUPAPA KAUPAPA KAUPAPA, KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA. Ko nga rongoa mo te whakatikatika, whakakapi ranei pera i nga korero i runga ake nei ko nga rongoatanga motuhake mo te takahi i tenei raihana. KAUA E KAUPAPA Icon Process Controls Ltd TE WHAKAMAHI MO TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE TANGATA. KO TE WHAKAMAHI KI TE WHAKAMAHI I TE WHAKAMUTUNGA, KAOTI, KAUPAPA KAUPAPA, KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAUPAPA KAORE TANGATA E WHAKAMAHIA KI TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE ICON Process Controls Ltd. Ka whakamaoritia tenei raihana i runga i nga ture o te kawanatanga o Ontario, Canada.
Mena ka mau tetahi wahanga o tenei raihana kua muhu, e kore ranei e taea te whakamana mo tetahi take, kaore taua kitenga e whakakore i etahi atu waahanga o tenei raihana.
Mo etahi atu tuhinga hua me te tautoko hangarau tirohia:
www.iconprocon.com | ī-mēra: sales@iconprocon.com support@iconprocon.com ranei | Ph: 905.469.9283
by
Waea: 905.469.9283 · Hokohoko: sales@iconprocon.com · Tautoko: support@iconprocon.com
24-0500 © Icon Process Controls Ltd.
15
Tuhinga / Rauemi
 |
truflo TIP-Series Insertion Paddle Wheel Flow Meter Sensor [pdf] Pukapuka Tohutohu TIP-Series, TIP-Series Insertion Paddle Wheel Flow Meter Sensor, Insertion Paddle Wheel Flow Meter Sensor, Paddle Wheel Flow Meter Sensor, Wheel Flow Meter Sensor, Flow Meter Sensor, Meter Sensor |