Vcontrol 20231115 Video Intercom Access Manual
WHAKATOKANGA
Ko te taputapu ko te tatau kotahi multifunction kaiwhakahaere uru tukotahi he kaipānui putanga Wiegand ranei. Ko te mahi he tino ratarata-kaiwhakamahi, me te ara iahiko iti-hiko hanga reira roa te ora ratonga.
Ngā āhuatanga
- Te pouaka whakarewa, anti-vandal
- He parewai, he rite ki te IP65
- Waea ataata i runga i te WiFi
- Kotahi tānga, 1,000 kaiwhakamahi (990 noa + 10 manuhiri)
- PIN roa: 4-6 mati
- Momo kaari: 125KHz EM Card/13.56MHz Mifare Card
- Ka taea te whakamahi hei kaipanui Wiegand me te whakaputanga buzzer
- Te whakaurunga poraka kaari
- Whakaatu tūnga LED toru-tae
- Aratau Pulse, Aratau Takahuri
Whakatakotoranga
| Te Kaha Kaiwhakamahi Common User Visitor User | 1000900 (Fingerprint version support 100 fingerprints)10 |
| Mahinga Mahi Voltage Mahi o naianei mangere o naianei | 12~18V DC<150mA<60mA |
| Kaipānui Kaari TataHangarau Reo Irirangi awhe Panui | EM/Mifare125KHz/13.56MHz2-6 cm |
| PIN Roa | 4-6 mati (Putanga papapātuhi anake) |
| Hononga Waea | Rere Putanga, Puta Patene, Wiegand Whakauru, Wiegand Putanga |
| Rere Relay Whakaritea Whakaputa Wā Maukati Uta Putanga | Kotahi (NO, NC, Common)0~99 Hekona (5 hēkona taunoa)2 Amp Mōrahi |
| Atanga Wiegand | kāri EM: Wiegand 26~44 paraka whakauru me te whakaputa.Kaari Mifare: Wiegand 26-44bits56bits, 58bits whakauru me te whakaputa.(Factory taunoa: Wiegand 26bits mo te kaari EM, Wiegand 34bits mo te kaari Mifare) |
| Putanga PIN | 4 moka, 8 moka(ASCII), 10 mati Tau Mariko (Factory Default: 4 moka) |
| Te Taiao Mahi Te Temehana Te Maama Mahi | Ka tutuki IP65
|
| Tinana Tae Ahu Taumaha Waeine Taumaha Tuku |
Zinc-Alloy Hiriwa & Pango 142 x 48 x 22mm 315g 410g |
Kaata Inventory
Diode 1N4004 (Mo te tiaki iahiko rei)
Puta
Nga Tiwiri Patohia e koe
Porohita Tima
WHAKATANGA
- Tangohia te uhi o muri mai i te waeine
- Poia kia 2 nga kohao (A,C) ki te pakitara mo nga wiri me tetahi kohao mo te taura
- Patotohia nga putea rapa kua tukuna ki nga kohao wiri(A,C)
- Whakatikahia te uhi o muri ki runga i te pakitara me te 4 nga mahunga papatahi
- Mirohia te taura ki roto i te poka taura(B)
- Whakauruhia te waeine ki te uhi o muri
Waea waea
| Tae Waea | Mahi | Notes |
| Waea Motuhake Motuhake | ||
| Whero | DC + | 12-18V DC Whakauru Mana |
| Pango | GND | Pou Toraro o DC Power Input |
| Kahurangi | Rere NO | Whakatuwherahia te Putanga Rere (whakauruhia te diode) |
| Paraone | Rere Common | Hononga noa mo te Putanga Rere |
| Kerei | Rere NC | Putanga Rere Katia Katia (Tāutahia te diode) |
| Kōwhai | TUwhera | Tono kia Puta (REX) Whakauru |
| Waea Whakawhiti (Wiegand Reader or Controller) | ||
| Kakariki | Raraunga 0 | Raraunga Putanga Wiegand (Uru-Ma roto) 0 |
| Mā | Raraunga 1 | Raraunga Putanga Wiegand (Uru-Ma roto) 1 |
Tohu oro me te Maama
| Tūnga Mahi | LED | Pūorooro |
| Tu mai | Marama whero kanapa | — |
| Whakauruhia ki te aratau papatono | Ka whiti te rama whero | Kotahi te tangi |
| I roto i te aratau hōtaka | Karaka marama kanapa | Kotahi te tangi |
| Hapa mahi | — | E toru nga tangi |
| Puta atu i te aratau Papatono | Marama whero kanapa | Kotahi te tangi |
| Tuwhera raka | Te marama matomato marama | Kotahi te tangi |
| Whakaoho | Ka tere te marama whero | Puhipuhi |
Whirihora Taketake
Whakauruhia ka Putaatu i te Aratau Papatono
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Whakauruhia te Aratau Papatono | * (Waehere Matua) # (Ko te taunoa wheketere 123456) |
| Putaatu i te Aratau Papatono | * |
Tautuhia te Aratau Mahi
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Whakauruhia te Aratau Papatono | * (Waehere Matua) # |
| Whakahou Waehere Matua | 0 (Waehere Matua Hou) # (Tukuhia Waehere Matua Hou) # (Ko te Waehere Matua he 6 mati) |
| Putaatu i te Aratau Papatono | * |
Tuhipoka: E 3 nga momo mahi a te taputapu: Aratau Motuhake, Aratau Kaiwhakahaere, Aratau Panui Wiegand, whiriwhiria te aratau e whakamahia ana e koe. (Ko te wheketere taunoa ko te Aratau Motuhake / Aratau Kaiwhakahaere)
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Whakauruhia te Aratau Papatono | * (Waehere Matua) # |
| Aratau Motuhake/Kaiwhakahaere OR Aratau Panui Wiegand | 77# (Factory default)78# |
| Putaatu | * |
ARatau TUATAHI
The device can work as Standalone Access Control for single door. (Factory default mode) –77#
Hoahoa Hononga
Whakawhiwhi Hiko noa
aro:
Me whakauru he diode 1N4004, he rite ranei ina whakamahia he hiko hiko, kei pakaru ranei te papapātuhi. (Ko te 1N4004 kei roto i te kete)
Mana Uru Mana Mana
Papatonotanga
Ka rereke te kaupapa i runga i te whirihoranga uru. Whaia nga tohutohu kia rite ki to whirihoranga uru.
Notes
> Tau ID Kaiwhakamahi: Assign a user ID to the access fingerprint/card/PIN in order to track it.
Ko te ID Kaiwhakamahi noa
Putanga tapumati:
- Fingerprint user ID: 0~98
- PIN/Kaari Kaiwhakamahi ID: 0~9
- – Card user ID: 100~989
- ID Kaiwhakamahi manuhiri: 990~9
- TT Kaiwhakamahi Matamati Matua: 99
- ID Kaiwhakamahi manuhiri: 990~999
Ētahi atu putanga e rua:
- PIN/Kaari Kaiwhakamahi ID: 0~989
- ID Kaiwhakamahi manuhiri: 990~999
NUI: Ko nga ID Kaiwhakamahi karekau me haere me nga koo matua. He mea nui te tuhi i te ID Kaiwhakamahi. Ko nga whakarereketanga ki te kaiwhakamahi me waatea te ID Kaiwhakamahi.
> Kaari Tata:
Kaari Tata: 125KHz EM card/13.56MHz Mifare Card
> PIN: Can be any 4-6 digits except 8888
Tāpiri Kaiwhakamahi noa
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Enter Program Mode Add Fingerprint User (Fingerprint very | * (Waehere Matua) # |
| Tāpiri Kaiwhakamahi Tapumati (Putanga Tapumati anake) | |
| Using Auto ID (Allows the device to assign Fingerprint to next available User ID number)OR2. Select Specified ID (Allows Master to define a specific User ID to associate the fingerprint to) | 1 (Fingerprint) (Repeat Fingerprint) (Repeat Fingerprint again)Fingerprints can be added continuously.1 (User ID) # (Fingerprint) (Repeat Fingerprint) (Repeat Fingerprint again)Fingerprints can be added continuously. |
| Tāpiri Kaiwhakamahi Kaari | |
| Using Auto ID(Allows the device to assign Card to next available User ID number)OR2. Select Specific ID(Allows Master to define a specific User ID to associate the card to)OR2. Add Card: Block Enrollment(Allows Master to add up to 890 cards to the Reader in a single step)Takes 2 minutes to program. | 1 (Read Card)/(Input 8/10/17 Digits Card Number) #The cards can be added continuously.1 (User ID) # (Read Card) /(Input 8/10/17 Digits Card Number)#1 (User ID) # (Card Quantity) # (The First Card 8/10/17 Digits Number) # Cards’ number must be consecutive; Card quantity = number of cards to be enrolled. |
| Add PIN User (Keypad version only) | |
| Using Auto ID(Allows the device to assign PIN to next available User ID number)OR2. Select Specific ID (Allows manager to define a specific User ID to associate the PIN to) | 1 (PIN) #The PINs can be added continuously1 (User ID) # (PIN) #* |
| Putaatu | * |
Tohutohu mo te Haumarutanga PIN (E whai mana ana mo nga mati 6 PIN):
Mo te haumarutanga teitei ake ka whakaaetia koe ki te huna i to PIN tika me etahi atu tau tae atu ki te 10 nga mati
Exampte PIN: 123434
You could use **(123434)** or ** (123434) (“*” can be any numbers from 0~9)
# Tuhipoka: Ko tenei mahi mo te putanga papapātuhi anake
Add Master Fingerprint (By Specified ID: 99, Fingerprint version only
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Whakauruhia te Aratau Papatono | * (Waehere Matua) # |
| Tāpiri Tohu Maama Matua | 1 (99) # (Mamati Maihao) (Tuarua Maama Maihao) (Tuarua Maama Maihao) |
| Putaatu | * |
Tāpiri Kaiwhakamahi Manuhiri (He tika mo nga Kaiwhakamahi Kaari/ PIN)
(Ko te nama ID Kaiwhakamahi ko 990~999; te roa PIN: 4~6 mati engari ko te 8888) E 10 nga roopu manuhiri PIN/kaari e waatea ana, ka taea te tohu nga kaiwhakamahi ki te 10 nga wa e whakamahia ana, i muri i etahi wa, ara, 5 i etahi wa, ka muhu aunoa te PIN/kaari.
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Whakauruhia te Aratau Papatono | * (Waehere Matua) # |
| Tāpiri Kāri OR Tāpiri PIN (Putanga papapātuhi anake) | 1 (User ID) # (0~9) # (Read Card) /(Input 8/10/17 Digits Card Number) # 1 (User ID) # (0~9) # (PIN) #(0~9 means times of usage, 0-10 times) |
| Putaatu | * |
Hurihia nga Kaiwhakamahi PIN (PIN length: 4~6 digits except 8888) (Keypad version only)
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Tuhipoka: Below is done outside programming mode, users can undertake this themselves | |
| Huri PIN | * (Tuhinga Kaiwhakamahi) # (PIN Tawhito) # (PIN Hou) # (Tuarua PIN Hou) # |
Mukua Kaiwhakamahi
| Hipanga Papatonotanga | Pahekotanga Patuhi | |
| Whakauruhia te Aratau Papatono | * (Waehere Matua) # | |
| Delete User-By Fingerprint/Card/PIN OR Delete User- By ID number OR Delete User – By Card number OR Delete ALL Users | 2 (Input Fingerprint)/ (Read Card)/(Input PIN) #The users can be deleted continuously.2 (User ID) #2 (Input 8/10/17 Digits Card Number)#2 (Master Code) # | |
| Putaatu | * | |
| # Tuhipoka: “Fingerprint” for Fingerprint version only “PIN” for Keypad version only | ||
Tautuhi Whirihoranga Relay
Ko te whirihoranga relay e whakatakoto ana i te whanonga o te rere whakaputa i runga i te whakahohenga.
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Whakauruhia te Aratau Papatono | * (Waehere Matua) # |
| Pulse Mode OR Toggle Mode | 3 (1-99) # (factory default)The relay time is 1-99 seconds. (Default is 5 seconds)30#Sets the relay to ON/OFF Toggle mode |
| Putaatu | * |
| Tohutohu Whakangāwari | |
| Whakaahuatanga Mahi | Mahi |
| Whakauruhia te Aratau Papatono | *-Master Code -#then you can do the programming (123456 is the factory default master code) |
| Hurihia te Waehere Matua | 0-New Code #Repeat the New Code -# (code: 6 digits) |
| Tāpiri Kaiwhakamahi Kaari | 1-Read Card -#(can add cards continuously) |
| Tāpiri Kaiwhakamahi Tapumati | 1-Mamati-Tuurua Maimati-Tuurua Maimati-# |
| Tāpiri PIN Kaiwhakamahi | 1-PIN-#(The PIN is any 4-6 digits except 8888which is reserved |
| Mukua te Kaiwhakamahi | 2-Fingerprint-#2-Read Card-#2-PIN-# |
| Puta atu i te Aratau Papatono | * |
| Me pehea te tuku i te tatau | |
| Kaiwhakamahi Tapumati | Tāuru Tapumati |
| Kaiwhakamahi Kaari | Panui Kari |
| Kaiwhakamahi PIN | PIN Tāuru # |
| #Note: “Fingerprint” for Fingerprint version only “PIN” for Keypad version only | |
Tautuhi Aratau Uru
Mo te aratau urunga maha o nga kaiwhakamahi, ko te wa mo te panui kare e neke ake i te 5 hēkona, ki te kore, ka puta te taputapu ki te tatari aunoa.
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Whakauruhia te Aratau Papatono | * (Waehere Matua) # |
| Uru matimatiOR2 Uru KaariOR2 PIN WhakauruOR2 Urunga Kaiwhakamahi MahaOR2 Matimati, Kaari, PIN ranei Uru | 4 0 # (Fingerprint version only)41 # (factory default for RFID version only) 4 2 # (Putanga papapātuhi anake)4 3 (2-9) #(I muri i te 2-9 nga kaiwhakamahi whaimana, ka whakatuwherahia te tatau)4 4 # (factory default for Fingerprint / Keypad version) |
| Putaatu | * |
Whakaritea te Whakaoho Patua
The strike-out alarm will engage after 10 failed entry attempts (Factory is OFF). It can be set to deny access for 10 minutes after engaging or disengage only after entering a valid Fingerprint/card/ PIN or Master code/ fingerprint/card.
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Whakauruhia te Aratau Papatono | * (Waehere Matua) # |
| Strike-OFF OR2. Strike-Out ONOR2. Patua-Ate KA (Whakaoho)Tautuhi Wā Whakaoho | 6 0 # (taunoa wheketere)61 # Ka whakakorehia te urunga mo te 10 meneti (Kei te mahi tonu te paatene Puta)6 2 #5 (0 — 3) # (factory default is 1 minute) Enter Master Code # or Master Fingerprint / Card or valid user fingerprint / card / PIN to silence |
| Putaatu | * |
Tautuhia te Whakautu Rongo me te Ataata
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Whakauruhia te Aratau Papatono | * (Waehere Matua) # |
| Disable Sound Enable Sound OR LED Always OFFLED Always ON OR Keypad Backlit Always OFF Keypad Backlit Always ON Keypad Backlit Automatic OFF | 70#71# (factory default)72#73# (factory default)74#75#76# (factory default)Automatic OFF after 20 seconds, it will go ON by pressing any key (this key isn’t taken into consideration) |
| Putaatu | * |
Mahinga Kaiwhakamahi & Tautuhi ano ki te Taunoa wheketere
> Whakatuwheratia te tatau: Pānuihia te tapumati kaiwhakamahi whaimana, te kaari kaiwhakamahi ranei, te whakauru ranei i te PIN kaiwhakamahi whaimana #
> Tango ohooho: Enter Master Code # or Master Fingerprint/ Card or valid user fingerprint/card/ PIN
> Hei tautuhi ki te wheketere taunoa & Tāpiri Kaari Matua: Power off, press the Exit
Button, hold it and power on, there will be two beeps, then release the ex button, the LED light turns into yellow, then read any 125KHz EM card/13.56MHz Mifare Card, the LED will turn into red, means reset to factory defau successfully. Of the card reading, it is the Master Card.
Nga korero:
- Mena karekau he Kaari Matua i tapirihia, me pehi te Patene Putaatu mo te 5 hēkona i mua i te tukunga. (ma tenei ka muhu te Kaari Matua kua rehitatia o mua)
- Tautuhi ano ki te wheketere taunoa, kei te mau tonu nga korero a te kaiwhakamahi.
Master Fingerprint/Card Usage (Ko te Kaari Matua ehara i te taputapu taunoa i roto i te pouaka, tena koa taapirihia maau mena ka hiahiatia)
| Ma te Maataki Maama / Kaari hei taapiri me te whakakore i nga kaiwhakamahi | |
| Add Fingerprint/Card/ PIN Users | Input (Master Fingerprint / Card)Input (Fingerprint three times) or (Card) or (PIN #)Repeat step 2 for additional users Input (Master Fingerprint / Card) again |
| Delete Fingerprint/Card/PIN Users | Input (Master Fingerprint/Card Twice within 5s)Input (Fingerprint) or (Card) or (PIN #)Repeat step 2 for additional users Input (Master Fingerprint/Card) again |
| #Tuhipoka: “Master Fingerprint” for Fingerprint version only | |
WHAKAMAHI WHAKAMAHI
The device can work as Controller, connected with the external Wiegand reader. (Factory default mode) –77#
Hoahoa Hononga
aro: Me whakauru he diode 1N4004, he rite ranei ina whakamahia he hiko hiko, kei pakaru te kaipanui. (Ko te 1N4004 kei roto i te kete)
Tautuhia nga Whakahōputu Whakauru Wiegand
Whakatakotoria koa nga whakatakotoranga whakauru Wiegand kia rite ki te whakatakotoranga putanga Wiegand o te Kaipānui o waho.
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Whakauruhia te Aratau Papatono | * (Waehere Matua) # |
| Wiegand Input Bit | For EM Card: 8 (26~44) # (factory default is 26bits)For MI fare Card: 80 (26 sim44,56,58);(factory default is 34bts) |
| Disable Parity Bit | Enable Parity Bit80#81# (factory default) |
| Putaatu | * |
Tuhipoka: Mo te hono i nga kaipanui Wiegand me te 32, 40, 56 moka putanga, me whakakore nga paraka parity.
Papatonotanga
- He rite tonu te Papatonotanga Matua ki te Aratau Motuhake
- He rereke etahi hei aro maau:
Ko te taputapu e hono ana ki te Kaipanui Kaari o waho - Ki te kaipanui kaari EM/Mifare: ka taea te taapiri / te whakakore i nga kaiwhakamahi i runga i te taputapu, i te panui o waho ranei.
- If HID card reader: users can only be added/deleted on extremal reader.
Ko te taputapu e hono ana ki te kaipanui tapumati
Mo te example:
Honoa a SF1 hei kaipanui tapumati ki te taputapu.
Hipanga 1: Tāpirihia te Matimati (A) ki te SF1 (Tirohia ki te pukapuka SF1)
Hipanga 2: Tāpirihia te Matimati(A) kotahi ki runga i te taputapu:
| 1 | Whakauruhia te Aratau Papatono: * (Waehere Matua) # |
| 2 (Press Fingerprint A once on SF1) # (ID auto allocated)OR (User ID) # (Press Fingerprint A on SF1) # (Select specific ID) | |
| 3 | Putaatu:* |
Ko te taputapu e hono ana ki te Panui Papapātuhi
Ko te kaipanui papapātuhi ka taea te 4 Paraka, 8 Paraka (ASCII), te whakatakotoranga putanga 10 Moka ranei. Kōwhirihia te mahi i raro nei kia rite ki te whakatakotoranga PIN putanga o to kaipānui.
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Whakauruhia te Aratau Papatono | *(Waehere Matua) # |
| Moka whakauru PIN | 8 (4, 8, 10 ranei) # (taunoa wheketere he 4 moka) |
| Putaatu | * |
Nga korero: Ko te 4 te tikanga 4 moka, 8 te tikanga 8 moka, 10 te tikanga 10 mati tau mariko
- Tāpiri Kaiwhakamahi PIN:
Hei taapiri i nga kaiwhakamahi PIN, i muri i te urunga ki te aratau hotaka i runga i te taputapu, ka taea te whakauru/tapiri PIN ki runga i te taputapu, i te Kaipanui Papatuhi o waho ranei.
- Mukua nga Kaiwhakamahi PIN: he rite tonu ki te taapiri i nga kaiwhakamahi.
WIEGAND READER MODE
Ka taea e te taputapu te mahi hei Panui Wiegand Paerewa, hono atu ki te Kaiwhakahaere-78# tuatoru
Hoahoa Hononga
Tuhipoka:
- When set into Wiegand Reader mode, nearly all settings in Controller Mode
will become invalid, and Yellow wire will be redefined as below:
- Waea kowhai: Mana oho
- If you need to connect Yellow wire: When the input voltage no te mea he iti te Buzzer, ka tangi.
Tautuhia nga Whakahōputu Huaputa Wiegand
Whakaturia koa nga whakatakotoranga putanga Wiegand o Reader kia rite ki nga whakatakotoranga whakauru Wiegand o te Kaiwhakahaere.
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Whakauruhia te Aratau Papatono | *(Waehere Matua) # |
| Wiegand moka putanga Moka putanga PIN |
For EM Card: 8(26 – 44) (factory default For Mi fare Card: 80 (26~44, 56, 58) #(factory default is 34bits)8 (4 or 8 or 10) # (factory default is 4 bits) |
| Disable Parity Bit Enable Parity Bit | 80#81# (factory default) |
| Putaatu |
Tuhipoka: Mo te hono i te kaiwhakahaere Wiegand me te 32, 40, 56 moka whakauru, me whakakore nga paraka paremata.
HE WHAKAPONO TUPONO
Aratau Kaari Kohinga
After this mode tumed on, all cards can open the lock. At the same time, the card is added to the device.
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Whakauruhia te Aratau Papatono | *(Waehere Matua) # |
| Collection Card Mode OFF OR Collection Card Mode ON | 92# (factory default)93# |
| Putaatu | * |
Tautuhi ano i te WiFi (I muri i te tautuhi, ka tangohia te taputapu ki APP)
| Hipanga Papatonotanga | Pahekotanga Patuhi |
| Whakauruhia te Aratau Papatono | *(Waehere Matua) # |
| Whakahou Waehere Matua | 9 (Waehere Matua) # |
| Putaatu | * |
Tuhinga / Rauemi
 |
Vcontrol 20231115 Ataata Whakawhiti Waawhiti [pdf] Pukapuka Kaiwhakamahi 20231115 Ataata Waea Waea, 20231115, Ataata Waea Waea, Waea Waea, Waea |
