Visionis FPC-6202 Four Doors Access Control TCP IP Wiegand Controller
Whakatakotoranga
- Product Name: Access Controller, Card Reader, and Exit Button Kits
- Model Numbers: FPC-6202, VIS-3100, VIS-AXESS-4D-ETL, VIS-7013
- Components: Reader1, Reader2, Reader3, Reader4, Exit Buttons (1-4), AN1, AN2, AN3, AN4, Button 1, Button 2, Button 3, Button 4
Hoahoa Tāuta
- Refer to the installation diagram below for setting up the access controller, card reader, and exit button kits:
Nga Waahi Whakataunga
- Identify all the components in the kit.
- Follow the wiring diagram provided to connect the access controller, card reader, and exit buttons.
- Ensure proper power supply connections for the components.
- Mount the components securely at desired locations.
- Test the system to verify functionality.
Raparongoā
- If you encounter any issues during installation or setup, refer to the troubleshooting section of the user manual or contact customer support for assistance.
FAQ
Q: What should I do if the system does not power on after installation?
A: Check the power connections and ensure they are properly connected. Verify that the power source is working before contacting support.
Q: Can I expand the system with additional components?
A: Yes, you can expand the system by adding compatible components following the provided guidelines in the user manual.
Q: How do I reset the access controller to factory settings?
A: Refer to the user manual for specific instructions on resetting the access controller to factory settings.
Tuhinga / Rauemi
 |
Visionis FPC-6202 Four Doors Access Control TCP IP Wiegand Controller [pdf] Aratohu Tāuta FPC-6202, VIS-3100, FPC-6202 Four Doors Access Control TCP IP Wiegand Controller, FPC-6202, Four Doors Access Control TCP IP Wiegand Controller, Access Control TCP IP Wiegand Controller, IP Wiegand Controller, Wiegand Controller, Controller |